You have GTX 1070 installed on both computers.
On two computers is not showing the shadow?
I checked the computer.
MyCom2 video driver 388.13 (Update your video driver just in case)
MyCom1 - video driver 430.86
This is a known issue in Unreal Engine engines. https://answers.unrealengine.com/que…3995/view.html
Here is my computer,
Core i7700
Video Card RTX2080 Ti
Ram 16 gb.
Hi!
I installed the 4.22 engine on my computer.
Q9400 Quad Core Processor
GTX 770
After a while, I can check.
I was checked for 4.18-shadows didn’t work.
On 4.22 the shadows work I have.
I don’t know what the reason is. I need to look at a weak computer to reproduce the problem.
Thanks!
You’re right. I found a solution. As it turned out the shadow quality settings cinematic does not work in stereo mode. The solution is to change the shadow settings to Epic.
https://i.yapx.ru/EfgrE.gif (gid animation) Shadow - Epic
Shadow - Cinematic
Hi.
I am sorry that I cannot speak English first.
I post to share my symptoms.
I shared a lot of information with the producer ElizaRF.
My spec is Windows10. , UE4 Engine 4.22.3
I tested two computers.
When using 2D stereo mode
No direct sunlight shadows emerged from the right viewport.
If the engine setting is changed to the EPIC or lower level, all light types are:
The shadows come out well on both sides. Good!!!
If the engine is set with Cineamtic, no shadow will appear in the right viewport.
If you change the light type to moveable, both of them worked well.
However, the light type Static or Stationary does not have a shadow on the right viewport.
so
I set up the engine and made a compromise by lowering the shadow to the epic.
I don’t know the exact cause, but I’ve been doing many tests.
I have found this issue.
I’m going to keep testing.
I wish you all good luck.
Thank you ElizaRF, the producer who always answered my questions well.
Great plug-in Camera360!!!
.
I uploaded this symptom to my YouTube.
★★★★★★★★★★★★★★★★
★★★★★★★★★★★★★★★★
Additional Test Verification
When you change the shadow to epic at engine setting, ((DirectionalLight = Static or Stationary)
HighReshot system = Both sides of the shadow look good
Sequencer systems = only one side is shaded.
The recommended option was to change the direct sunlight to Movable.
The cause is still unknown.
Thank you very much yhsgoon for the detailed description, I’m sure that it will help a lot!
This problem only exists in actor Camera_2D in stereo mode. Because it uses a SplitScreen mode.
There is no such problem in other actors camera.
I did everything for avoid seams. But there are some seams in the capture image already.
Looking forward to your replay.Thank you.
Good day, Lucky2016!
I downloaded a link to the project. You can remove the project reference. I’ll check and text you.
Please change Screen Space Reflection in Post Process scene (You can specify a value that is appropriate for You, example intencity = 0).
Thanks for your replay.
When the Camera_point_360 Actor location is (X=-840.000000,Y=190.000000,Z=120.000000) in my project. The seams are still there!
Very strange. I made video. There is also one note, the actor who is affected by postprocessing is camera_rec_360 . All postprocess where is Camera rec 360 actor, you need to set all the values of the screen space reflection to 0
Examples render:
360 Mono mode + Post Processing (without screen space reflection) (the seams are not visible ) (target 2048 px rendering): https://youtu.be/LzgZWd1OP0M
360 Mono mode + Post Processing + reflection space of the screen (the seams visible) (render target of 2048 px): https://youtu.be/JPoE_r5r9AY
**News 07/16/2019.Release new update 1.13 fix 3 .
Video update Tutorial 5. Raytracing. Camera 360 for Unreal Engine 4 - YouTube
Added the ability to use RayTracing using camera360.
Now You can get the final image in the usual way. All you need to do is activate the Raytracing value.
This mode allows a lower load on the video memory. I think this can solve the problem of artifacts on weak systems, You can also try to activate this function.
Added new properties of the actor camera_rec_360 is important:
Delay Next Frame.
This is a pause between shots, if it is increased, the load on the graphics card should be less.
Raytracing - activates the ability to reduce the load on the graphics card.
Notice:
The system works only with HighResShot system. rendering using the Sequencer is not supported.
Raytracing system was tested on RTX 2080Ti video card. You will need a good graphics card to work.
At the moment, 360, 180 mono modes work well.
But in stereo mode you need more load.
Do not forget, if You have stereo mode, You need to reduce the resolution of the resulting image. Otherwise, there may be a lack of memory.
Also at the end of the rendering are automatically activated console command r.RayTracing.Reflections 0 and r.RayTracing.GlobalIllumination 0.
To activate the options in the Editor, you must enter the console commands r.RayTracing.Reflections 1 and r.RayTracing.GlobalIllumination 1.
This is done to reduce the load on the graphics card.
Because ray tracing is very expensive in performance, failures can occur because of lack of memory. Much depends on the quality and complexity of the scene. But I hope that with each version of the engine ray tracing will become more productive in relation to rendering.
I’ve been rendering 4096x2048 360 videos from a game un UE4.22.3 using sequencer. Please note the bug I’m experiencing with the latest version of 1.13 of the Camera360 plugin:
Hi, dgungadoo!
Thanks for purchase. I am pleased to hear that You will need this plugin.
Try off post process
Try off Atmospheric fog or heigh fog in scene.
https://forums.unrealengine.com/unreal-engine/marketplace/1595263-camera-360-system-blueprints?p=1613354#post1613354
and dont forget change anti alising in project. To make the image clear.
Hi,
I Have a Problem with the sequencer. Maybe someone knew how to fix it.
I Can´t render my Movie in a resoulution higher then 4096x2048. Everytime i try to render 6000x3000 the movie is black and i cant use the play button.
Good day!
can you record a video of the process?
To make it easier for me to understand the problem.
Maybe this can help?
Tutorial working in Sequencer youtube.
Please see https://forums.unrealengine…
Camera_Point_360 attached to Camera in sequencer.
Example youtube
Hello! I seem to not be able to activate the 360 Rec Camera. I follow your same steps as in the tutorial, and then in the preview window the angle of the camera view stays at 90 deg, and the 360 view that showd appear stays as if it were a normal camera. I cant seem to be able to fix it. Thank you!
Good day, Enagudo!
Can you record a video of your scene or send a scene? I could check the camera settings.
It is also very often the settings for another camera in the sequencer interfere with camera_360 . Check that other cameras are not active.
https://www.youtube.com/watch?v=a3VZdEqbpv8&feature=youtu.be
Hello, bloom has a bug? The seams appear in the sky. This is the effect of my opening the bloom function. Is there a way to improve it?
Hi , **gaoshuo **!
Try off post process
If the solution helps, please rate the product in the store. Thanks.
If you have any questions, write on the forum and I will answer your question…
Hey hey! Hope all is well! I am having an issue with a scene. One of the sides of the cube shows up way darker than the rest, and I’m not really sure what is making it do that. I am attaching a screengrab of it. Please help! Thank u
Thank you! It was the tiniest problem, managed to solve it!! Thank you!!!
