Hello people
I got problems configuring the Swarm Agent to run together on multiple devices, first my current setup:
- PC A runs the Coordinator, Agent and UE4, It is connected to the router over LAN and got a static IP, also can it see all other PC’s. It runs Windows 8.1 Pro x64
- PC B runs the Agent, it is connected to the router over LAN too and got also a static IP, it also can see all other PC’s. It runs Windows 8.1 x32
- PC C runs the Agent too, it is connected over WLAN and uses DHCP, it also can see all other PC’s. It runs Windows 8.1 x64
I use PC A to work on code and maps, my problem is that i get for each other device a different error:
If i got PC A and B started and inside the Coordinator list and start building lightning, i get the following output on PC A:
16:56:03: [Connect] Successfully opened a remote connection with INGRID-PC
16:56:03: [EndJobSpecification] Tried to begin the job on a valid remote connection, but failed
16:56:03: [CloseConnection] Closing connection 1ADC0C6B using handle 1ADC0C6B
16:56:03: [CloseConnection] Connection confirmed for disconnection 1ADC0C6B
16:56:03: [CloseConnection] Closing bi-directional remote connection (1ADC0C6B)
16:56:03: [CloseConnection] Connection disconnected 1ADC0C6B
16:56:03: [MaintainConnections] Remote connection has closed (1ADC0C6B)
16:56:03: [MaintainConnections] Removed connection 1ADC0C6B
But PC B gives me this output:
16:55:47: [Connect] Remote agent connection object obtained: OS-TERMINAL
16:55:47: [Connect] Remote agent connection confirmed: OS-TERMINAL
16:55:47: [Job] Accepted Job C47A5F45-4B7F7640-86BC5CB9-CE0C84C1
16:55:49: [MaintainConnections] Detected dropped remote connection, cleaning up (1ADC0C5D)
16:55:49: [CloseConnection] Closing connection 1ADC0C5D using handle 1ADC0C5D
16:55:49: [CloseConnection] Connection confirmed for disconnection 1ADC0C5D
16:55:49: [CloseConnection] Closing bi-directional remote connection (1ADC0C5D)
16:55:49: [CloseConnection] Connection disconnected 1ADC0C5D
16:55:50: [MaintainConnections] Remote connection has closed (1ADC0C5D)
16:55:50: [MaintainConnections] Removed connection 1ADC0C5D
16:55:50: [MaintainConnections] All connections have closed
It does not matter if the firewall is enabled or disabled on both devices, it always happens and both outputs loogs in the logs until lightmass has completed.
If i try to use C for building light, i get the following output on A:
17:09:07: [Connect] Successfully opened a remote connection with OS-TABLET
17:09:08: [PushChannel] Pushing the channel has failed!
where the second line repeats infinitely.
C on the other sides gives me this output:
17:12:26: [Connect] Remote agent connection object obtained: OS-TERMINAL
17:12:26: [Connect] Remote agent connection confirmed: OS-TERMINAL
17:12:26: [CloseConnection] Rejected, unrecognized or inactive connection (1ADC0C79)
17:12:26: [Job] Accepted Job E0720E6D-418C4B2C-C0EA1B98-48B4BCB5
I am really clueless why that happens, firewall disabling didnt worked, static ip also does not work (all were dynamic at the begining).
At last i am attaching an image of the configuration screen of the swarm agent, all Agents got the same configuration (Except for the cache folder)