Hi, TCivilFX!
i understand you.
But you need to put PostProcess on the stage, otherwise you will have stitches if you do not specify the necessary settings. This is mandatory.
You can also change the brightness of the resulting image and contrast if necessary.
The fact is that the resulting image does not come directly from the cubic map, but from the camera, so there are slight differences in brightness.
Important/Additional Notes:
Some Post processing does not work, artifacts appear in the form of seams.
Solutions:
- Vignette = 0 (In Post Process);
- Bloom = 0 (In Post Process);
- ScreenSpace Reflection = 0 (In Postprocess);
- Atmospheric Fog - volumetric off;
- Exponecial Heigh Fog - volumetric off;
- Directional Light - Light Shafts Off;
- Exposure (Sometimes due to the uneven distribution of exposure occurs in the seam. Try to adjust the check Exposure method Manual and change Exposure value).
- Ambient Occlusion (Sometimes).
- DOF needs to be turned off;
Let me know if you need help if something doesn’t work out, I can connect to you directly.
[EMAIL=“”]