[SUPPORT] CAMERA 360 System

[Ivan_Elizarov]

@CG_Creator

Hi all,

First I want to say, this is a great plugin and reply fast and seems always happy to help.

I ran into an issue and it took me a while to figure it out, so I ll just write it here in case it helps someone in the future.

The issue happened only on UE4.20, if you follow the tutorial, when you try to record it would record your camera animation but without 360 panorama… the work around to fix it is, after everything is setup, just create another basic camera, then in the sequencer, assign that new basic camera to the main camera with animation you have, and then re-assign your main camera with animation… This seems to fix the problem and then when you record everything works as it should…

Also I m sure this has been talked about before, but things I had to get turn off so I dont get seams or blurriness, DOF needs to be turned off, i turned off the on Sun (light source) light shaft bloom. Depending on the project, Bloom, vignettes etc… could cause an issue…

I just bought it 2 days ago, so i might be wrong, but I thought I shared my first experience so far.

Here s a frame from a 360 vid I m working on

Hi, CG_Creator!
Thanks for purchased!
Wow. This Image realistic

Thank you for exploring the features of the 360 camera. There can always be something new. I will write down the known moments that may cause stitches.

Post process and seams:

1. Vignette = 0 (In Post Process)
2. Bloom = 0 (In Post Process)
3. ScreenSpace Reflection = 0 (In Postprocess)
4. Atmospheric Fog - volumetric off;
5. Exponecial Heigh Fog - volumetric off
6. Directional Light - Light Shafts Off
7. Exposure (Sometimes due to the uneven distribution of exposure occurs in the seam. Try to adjust the check Exposure method Manual and change Exposure value).
   Result: https://youtu.be/KU01Uy4n8wU
8. Ambient Occlusion (Sometimes).
   +9. DOF needs to be turned off. Thanks CG_Creator.

If working your camera, but Camera 360 not working. Did you check if your Сamera Cut sequencer overlaps the 360 camera?
Be sure to make the Camera Cut-track Locked.
Example in the video: https://youtu.be/pHPKJRH7Uxw?t=246 (and Version 4.24 and more - dont’forget added Transform 0.0.0 for camera point 360.)

You have the opportunity to write to me by email ****