Summary
No two spline mesh components can be aligned exactly, whether deformed or not. Where the end of one segment should meet the start of the next, the rendered geometry of the two is offset, which leaves cracks and gaps at every seam, light leaking through as shadow artifacts, misaligned collision, and the same misalignment in meshes baked from spline meshes. Two static meshes placed the same way align perfectly. It affects every kind of spline mesh, including landscape spline meshes, and shows in the editor and in live games, for example on roads built from spline mesh segments. It is present in Unreal Engine 5.4, 5.6.1 and 5.8.0, and in UEFN 6.0.0 (Fortnite 43.00), so spline mesh rendering has had this problem for several years.
Please select what you are reporting on:
Unreal Editor for Fortnite
What Type of Bug are you experiencing?
World Building
Steps to Reproduce
-
In a new level, add two spline mesh components that use the same cube mesh (100 x 100 x 100 cm), with no deformation: the first with the default values (Start Pos 0,0,0, Start Tangent 100,0,0, End Pos 100,0,0, End Tangent 100,0,0, Spline Up Dir 0,0,1, Forward Axis X), the second with the same values, placed 100 cm further along X so its start meets the end of the first.
-
For comparison, place two static mesh cubes of the same size side by side the same way.
-
Set the editor’s Near View Plane setting to 0.001 so the camera can get very close, and show mesh edges in the viewport.
-
Zoom in on the seam between the two spline meshes, and on the seam between the two static meshes.
-
Add a spot light above the spline mesh seam, and check the player collision view (complex collision as default).
-
Repeat with the cube mesh’s pivot at its bottom center and at its mesh center, and compare the seams.
Expected Result
The two spline mesh segments meet exactly at the seam, as the two static meshes do: no offset, no crack, no light leaking through and no step in the collision.
Observed Result
The two spline mesh segments are visibly offset at the seam, while the two static meshes align perfectly. A spline mesh next to a static mesh does not align either. The spot light shows a line of shadow artifact pixels along the seam, and the collision is misaligned the same way. Subdividing the cube mesh does not help. The mesh’s pivot appears to change the result: the same cube with its pivot at the bottom center behaves differently from the cube with its pivot at the mesh center, and depending on the pivot the seam shows not only a misalignment but real cracks and gaps between the two spline meshes. Deformed spline meshes, such as the roads of the vehicle template, show cracks and gaps between segments.
Images 1 to 15 are from Unreal Engine 5.8.0, image 16 from UEFN 6.0.0 (Fortnite 43.00).
(1) The vehicle template’s roads, built from deformed spline meshes:
(2) and (3) Misalignment and gaps between adjacent road segments:
(4) and (5) Two static mesh cubes (red and blue, 100 x 100 x 100 cm) side by side: no misalignment and no crack:
(6) Two spline mesh components of the same cube mesh, no deformation:
(7) Their spline mesh values: the defaults, shown in step 1.
(8) and (9) Close up on the seam of the two spline meshes: the misalignment is clearly visible:
(10) A static mesh (blue) next to a spline mesh: they do not align, because the spline mesh renders incorrectly:
(11) Lighting off, two spline meshes: the misalignment is clear in their geometry:
(12) A spot light above the spline meshes shows an artifact that appears in the editor and in live games (for example on roads built from spline meshes):
(13) Close up: a line of shadow artifact pixels along the seam (outlined in green):
(14) The player collision view (complex collision as default): the same misalignment:
(15) The cube mesh with 100 x 100 x 100 subdivisions: the same problem:
(16) UEFN 6.0.0 (Fortnite 43.00): two spline meshes of a 1 x 1 x 1 m cube with 1 subdivision show the same misalignment:
Platform(s)
PC (Windows)
Additional Notes
Tested in Unreal Engine 5.4, 5.6.1 and 5.8.0 (5.8.0-55116800), and in UEFN 6.0.0-59596594 (Fortnite 43.00): all show the same problem. It affects every kind of spline mesh, including landscape spline meshes. As far as we recall, when two deformed spline meshes are converted to dynamic meshes and baked into one static mesh, the misalignment is carried into the baked mesh too. We rate it as major because it affects rendering, causes visible artifacts in live games and carries over into baked meshes.
Internal bug database reference, for matching any follow-up to our records: 74YBFH.















