SKC Shop - ROOFLINE: Modular Rooftop HVAC Vents and Ductwork Kit | 18 Pieces

Build rooftop HVAC runs and ventilation details with ROOFLINE, an 18-module industrial prop kit in three finishes. It includes air handlers, condensers, vents and connecting ducts as Blender, FBX and GLB assets.

Try it free first: the Free Industrial Props Sampler has selected shapes from this kit in the Maintained finish (https://www.fab.com/listings/5cb0207a-22dc-4e39-8405-f6edd1dfbd81). Works with SERVICE GRID (https://www.fab.com/listings/d1ca2d89-0d6e-47c5-accd-3173649b7ff4) and BENCHWORK (https://www.fab.com/listings/386088aa-2917-47d1-97b8-c06faac39c3f).

Scene render: built only from ROOFLINE pieces. You get the modules; the plain walls and floor, the lighting, haze and the assembled scene are staging and are not included. In older gallery renders the roof, walls, walkway pads, lamps and skyline are staging too.

A twin-fan air handler, a compact condenser, an upblast roof vent, a wall exhaust fan, an intake louvre and a vertical exhaust stack. Rectangular duct in three straight lengths (0.5, 1 and 2 m) with a 90° elbow, a 45° elbow, a tee and a reducer. A terminal grille, a roof curb, paired floor supports, paired wall brackets and a weather cowl for an open duct end.

Every module comes in three baked finishes: Clean, Maintained (light wear) and Weathered. Swap the look of a whole run without touching geometry.

What's included

  • 18 modules × 3 finishes: native Blender files with editable procedural materials, plus asset-only GLB and FBX per module

  • PBR maps (base colour, roughness, metallic, OpenGL (Y+) normal) at 2K, plus a separate 1K set; 5 texture atlases per finish (20 maps). Each module uses one atlas, except the air handler, which uses two (body and detail)

  • LOD0, LOD1 (about 50%) and LOD2 (about 25%) on 15 modules as separate FBX files; the 3 simplest pieces (under 500 triangles: duct elbow 45°, duct tee, duct reducer) ship LOD0 only

  • Simple UCX box collision (Unreal naming) in every LOD0 FBX, 1–6 per module

  • GLB files are LOD0 only, textures embedded, no collision; LODs and collision are in the FBX files

  • Pivots at the connector or resting point: straight ducts, the 45° elbow, tee and reducer at the inlet centre with the run along +X; the 90° elbow at its inlet centre, turning upward; the terminal grille at the centre of its back face; the weather cowl on the end face of the duct it caps; the air handler, condenser, vents, stack, curb, wall fan, louvre, supports and brackets at the bottom (Z 0)

  • Connector empties whose names start with CONNECTOR_IN / CONNECTOR_OUT (the empties on B02-018 carry a B02-018_ prefix) on 11 modules in the Blender and GLB files

  • Real-world scale in metres; air handler 2.458 × 1.248 × 1.21 m. Duct bodies are 0.40 m square; flanges reach 0.48 m. Leave the small gaps shown in the guide's layout tables when chaining parts

  • An illustrated 9-page guide: module list with sizes and triangle counts, folder map, the connector-pivot convention, Blender use, three staged layouts as placement tables (air handler run, roof vent cluster, louvre wall), and Unreal, Unity and Godot notes

Triangles: 108 – 18,008 per module at LOD0 (43,700 for all 18).

Good to know

  • Normal maps are OpenGL (Y+). In Unreal, tick Flip Green Channel on the normal textures.

  • The FBX links base colour and normal automatically. Roughness and metallic maps need one manual hook-up in most engines; the guide shows how.

  • Collision is simple boxes. On open parts (weather cowl, roof curb, duct fittings) the box also blocks the space inside; refine it in your engine if things need to pass through.

  • The layouts are placement tables in the guide, not separate scene files.

  • In the native .blend, the procedural materials are set up for one placed instance of each module; for many copies, use the baked copies (included, matching the GLB/FBX).

  • The 90° duct elbow is module B02-010; its files keep the shipped name ElbowDuct0400.

  • Tested in Blender 5.2.2 (every GLB and FBX re-imported, all closed shells have positive volume, textures found) and with the Khronos glTF validator (0 errors, warnings only). Not tested in any game engine.

How it was made: AI-assisted production, created by Claude in Blender. The modules were built from code in Blender, then baked, exported and checked, and SKC Shop reviewed and packaged the files. AI-generated concept images were used only as visual direction and are not in the files. Every gallery image is a render of the actual models (the grey backdrop wall is staging only and is not in the kit).