SKC Shop - LOADING DOCK: Warehouse Loading Dock Props | 18 Modular Pieces

Dress warehouses, depots and logistics yards with LOADING DOCK, an 18-module kit in three finishes. Blender, FBX and GLB assets cover dock doors and levelers, pallets, crates, dock stairs and a hand pallet truck.

Try it free first: the Free Abandoned Industrial Props Sampler (https://www.fab.com/listings/3cdc8b67-fcdf-43bc-a7bc-944541be2b00) has ten pieces in a Derelict finish; this kit ships Clean, Maintained and Weathered. Pairs with CAUTION LINE (https://www.fab.com/listings/69f20ad7-1a39-45c8-8661-dffc41cf4db4).

Scene render: built only from LOADING DOCK pieces. You get the modules; the plain walls and floor, the lighting, haze and the assembled scene are staging and are not included. Older gallery renders also show cones and a striped barrier from our CAUTION LINE pack.

Euro and plastic pallets, small and large wooden crates, a set of three cartons and a stretch-wrapped pallet load. A sectional overhead dock door (opening 2.75 × 3.00 m, 9 × 10 ft) with a dock leveler, laminated rubber bumpers, a foam dock shelter and a swing-arm dock light. A dock face section in two variants, one with a leveler pit and one solid, that snaps every 3.60 m along the dock, plus dock stairs with a handrail, a steel bollard, a hoop guard, a wheel chock, a hand pallet truck and a signage set (DOCK 1 to DOCK 4, KEEP CLEAR, FORKLIFT TRAFFIC, CHOCK WHEELS).

Every module comes in three baked finishes: Clean, Maintained (dust and light wear) and Weathered (clearly worn: grime, stains, chipped edges, greyed wood). Swap the look of a whole dock without touching geometry.

What's included

  • 18 modules × 3 finishes: native Blender files with editable procedural materials, plus asset-only FBX per module and one GLB per finish (all 18 modules as separate nodes)

  • PBR maps (base colour, roughness, metallic, OpenGL (Y+) normal) at 2K, plus a separate 1K set; 7 texture atlases per finish (28 maps). Each module uses one atlas; the signs have their own so the lettering stays sharp

  • Baked maps run about 170-420 px/m at 2K; for extreme close-ups use the native .blend files (procedural materials).

  • LOD0, LOD1 (50%) and LOD2 (about 25%) on all 18 modules as separate FBX files

  • Simple UCX box collision (Unreal naming) in every LOD0 FBX (moving parts carry their own boxes)

  • The GLB (one file per finish, about 44, 61 and 75 MB) is LOD0 only, textures embedded once, no collision. Its 18 modules are separate nodes in a row 6 m apart; the guide shows how to pull one out in Unreal, Unity, Godot and Blender. LODs and per-part collision are in the per-module FBX files

  • Shipping pose: door closed, leveler lip down, hand pallet truck handle upright, dock light arm folded. The leveler lip, light arms and truck handle are separate objects with pivots at their hinges; the door panels are separate objects that slide (origin at panel centre), so you can pose them yourself

  • Pivots at the connector or resting point: pallets, crates, load, bollard, guard, chock and truck at the bottom centre (Z 0), the stairs at the front foot, centred in X; dock face sections at the top front edge so they snap along +X; the door, bumpers, shelter, light and signs on the wall plane. The dock leveler (B05-008) has its pivot at the top centre of the deck so it sits flush in the Pit dock face section; Pit and _Plain are separate objects

  • Real-world scale in metres; dock floor 1.20 m above the yard, Euro pallet 1.200 × 0.800 m, leveler 2.00 × 2.55 m

  • An illustrated 11-page guide: module list with sizes and triangle counts, folder map, pivot convention and poses, Blender use, three staged layouts as placement tables (two-bay dock, yard edge, staging area), and Unreal, Unity and Godot notes

Triangles: 984 – 9,260 per module at LOD0 (68,036 for all 18).

Good to know

  • Normal maps are OpenGL (Y+). In Unreal, tick Flip Green Channel on the normal textures. They carry fine surface detail only; the bevels are real geometry.

  • The FBX links base colour and normal automatically. Roughness and metallic maps need one manual hook-up in most engines; the guide shows how.

  • Collision is simple UCX boxes (one box on the pallets and crates, more on the multi-part modules; the count per module is in the guide). Each moving part (door panels, leveler lip, light arms, lamp head, truck handle) has its own box or boxes, named for that part, that move with it, and the fixed door collision is the two jambs, the header, the side tracks, the springs and the shaft, none of which crosses the door opening. On open parts such as the stairs and the hoop guard the boxes also block space that is empty; refine them in your engine if things need to pass through. The collision has not been tested in a game engine.

  • LOD2 is a simplified mesh; its surface can differ from LOD0 by up to about 1 cm. LOD1 and LOD2 are one merged mesh in the shipping pose, so the moving parts are not separate there.

  • The layouts are placement tables in the guide, not separate scene files.

  • In the native .blend, the procedural wear is generated from each module's own object space; for many copies or scaled copies use the GLB/FBX files (baked textures).

  • Tested in Blender 5.2.2 (every GLB and FBX re-imported: triangle counts, bounds and pivots match, no inverted shells, textures found) and with the Khronos glTF validator (3 GLB files, 0 errors, warnings only). Not tested in any game engine.

How it was made: AI-assisted production. Modelled, textured and checked by Claude (an AI model) working in Blender, reviewed and packaged by SKC Shop. Every gallery image is a render of the actual models (the grey walls and floors in the layout images are staging only and are not in the kit).