Shut Down During Export

Development Getting Started & Setup
,
1

I’m trying to export my scenes from URE, in the Movie Render Que, and I’m experiencing a “shut down”, while exporting…

so, so far I have tried to export about 13k frames at 1080p, and all attempts have failed, with a shut down, no error message, just my whole system shuts down, not restart, but shut down…

I’ve tried again, with only 500 frames, and it ate thur that in about 5 minutes
I’ve tried about 750 frames, it got to about 30-50% and then, shut down…
Shjit is crazy, Im asking my tech guy wussup. he swears by my equipment, he says it URE..

What do you think?

Any help would be greatly appreciated, I thank you in advance for all your efforts.

2

Maybe extensive power draw over time or power spikes are triggering your power supplies OCP ( Over Current Protection)

Check your hardware. Do you have enough power in your PSU to run the whole system at load for long periods of time?

Try running hardware monitor and inspect CPU / GPU / Motherboard temps during the render.
See if you can track down if any of the components are drawing too much power.

if it’s your GPU then you could try undervolting if heat is the issue (through msi afterburner)