Meet the BeastBound Guardians, a lineup of 16 fierce anthropomorphic warriors—from armored rhinos and cyber-gorillas to amphibious knights and soaring avian sentinels. Each full-body model is delivered as a single optimized mesh, ready for slicing and printing without assembly hassles.
These designs were born from the creative spark of AI-powered 3D generators and then polished by an artist’s hand, combining cutting-edge procedural creativity with human flair. Perfect as desk ornaments, tabletop miniatures, or shelf-king guardians, they’ll bring character and epic style to any collection.
Recommended Print Settings
Printer type: FDM / FFF
Material: PLA (standard or matte), PETG for added toughness
Nozzle: 0.4 mm
Layer height: 0.15 – 0.20 mm
Infill: 15 – 20 % (grid or gyroid)
Supports: Light tree/support touchups under arms and jaw overhangs
Build plate temp: 60 °C (PLA) / 75 °C (PETG)
Nozzle temp: 200 – 210 °C (PLA) / 230 – 245 °C (PETG)
Bed adhesion: Brim (3–5 mm) or glue stick
Post-Processing & Painting
Gently remove supports and sand with 200–400 grit.
Apply a thin primer to reveal any layer lines.
Hand-paint with acrylics or airbrush for vibrant details.
Seal with matte or satin varnish to protect your finish.
This collection was co-created with AI—leveraging generative 3D tools for rapid concept iterations—then refined by hand to ensure clean topology, printability, and that “wow” factor.
https://www.fab.com/listings/2fc8ff6c-0b61-4ea1-808a-112996ba63bb