3D model from 360 panorama

Development Asset Creation
,
1

Hi all,

Can anybody advice how to create 3D model from 360 panorama, if it’s possible? I need to create 3D building facades… :!: :!:

Thank you

2

Hi Vlad

Hope you have some sample data to test it and let us know if it worked…

3

If it’s stitched panoramas I’d go back to the source images to attempt a 3D model. Each panorama is only equivalent to 1 camera (all images from the same viewpoint) so you’d need a few panoramas at the very least. The distance between panoramas is usually too high in your average panorama tour. A few people have tried to do both and noted that they had to shoot 3-4x as many panoramas as they normally would for pano tour.

4

Hi Vlad,

If you do not have the original photos (unstitched) then its difficult because the stitching algorithm can corrupt the lens distortion etc.
If you are using a ladybug, then try to get the individual images, or as many panoramas as possible to reduce error.

5

Hi all.
Thank you for your suggestions and help.

6

Modeling images from a 360 degree camera