Texture blurry

Development Asset Creation
,
1

Hi all,

I have an issue with the texture model. It´s shows blurry in some areas (seem an aling or stiching problem)

The model has 213 cameras. I have tried to modify a lot of settings (detector sensitivity, projection error, etc) , but similar results in all texture renders.

Here shows the render in RC:

And here shows the render in another X soft:

Here shows my last parameters:

someones know what’s is happening? What’s im doing wrong?

Thanks a lot of!

 

2

hello, a similar issue:

https://support.capturingreality.com/hc/en-us/community/posts/115001394792-Blurred-textures

 

3

Thanks Lubenko, but no solve in the post you said

4

Hi Fernando,

your detector sensitivity is set to ultra, which might introduce weak points for orientation. I would leave that at the standard setting until you have an extremely difficult model.

You are probably right about the alignment being the cause. You need to inspect the model and try to find misaligned parts. Either use the inspection tool or look for doubled surfaces in the sparce point cloud. If you find them, then you need to improve the alignment until you are satisfied.

Did you try using another distortion model? Brown 4 works best for me - depends on the camera and lens.

 

5

Hi Gotz. Thanks for your reply.

the detector sensitivity is set to ultra but i tried in normal mode before with similar results.

I dont have test other distorsion model, but i´ll try it. Now is Brown 3

 

Thanks

Fernando