It works! Block is 180cm tall. This is awesome, thanks so much!
Resetting is the one thing I can’t get working right now. Maybe the setup I’m using with the Sequence isn’t what I should be doing. Obviously when I connect the Branch that has the Reset Loc condition, everything breaks down, no more points are measured and the widget print stays at 0.0.
I’m using the Vive controller trigger axis to activate the laser, so you can see what you’re pointing at. The click on the trigger (or axis value 1.0) is what activates the Get Loc1 and/or 2. The yellow BP lines are connected to the Impact Location of a Break Hit Result, which is connected to a LineTraceByChannel that gets updated on Event Tick. Clicking and holding the trigger causes it to immediately get Loc2 (upon the next frame I suppose) and printing the distance. So that’s less than ideal, I’d like for it to grab Loc1 or Loc2 for just the duration of one frame (or by whatever way that should be done, I don’t know if I’m tied to the line trace for that). And be required to have a Trigger Axis value of less than 1.0 in between measurements. So one could never hold the trigger for too long and screw up the measurement. But obviously I need your help with that too. I’ll see what I can do with my limited skills in the meanwhile as well.
Awesome.