I have been using a Mavic Air 2 with great results. I recently purchased a DJI mini 3 which supposedly has a similar camera. I probably did the most detailed take off I’ve done to date and I was surprised when the alignment came back with a very poor 100/700 photos. It only aligned the front of the building and it was quite unlevel / tilted.
Does anyone know if the Mini 3 was the issue? I did not change any settings before shooting. The photos themselves look fine and similar to what I would capture on the Mavic Air 2.
I tried aligning multiple times with the same results.
When adding the folder of images I get this error message:
Then, it only imported a few of the images in the folder. Very strange.
Here is a 2nd scan. I took 292 images and it aligned all images. However, the model is not level:
What in the world is going on?
Hello @Big_Picture045
The Adding images is a known bug on Windows side: Unreal Engine Issues and Bug Tracker (RC-1881)
The problems with your alignment could be a poor GPS for such drone. Try to turn off the camera priors (the positions obtained from the capturing) and then align the images again.
This worked. Select all photos and look at the settings. Change all prior to “unknown”.
