Announcement

Collapse
No announcement yet.

Unofficial DMX in Unreal MegaThread. 4.26+

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • replied
    So in reference to everyone trying to get custom gobos working, the gobo tables is just a value reference, changing the linked file does nothing sadly...
    The way UE4 does it is the whole wheel is one long thin strip and then there are pre-determined points for it to snap to along the 'ribbon' so the way to change it is if you open up the blueprint for your moving light, then go to the GoboWheel_Component and at the bottom of the details panel on the right, open up DMX Gobo Wheel and double click on the Clean Disk image, it'll show you your 'wheel'. What you then need to do is find it in the content browser, download it and either edit it or upload an identically sized image, making sure that you keep each gobo the EXACT same size as they will overlap otherwise, then you need to create a blurry version of that ribbon and put that into the Frosted Disk slot.
    If you need to know the size of the image, unreal will tell you when you double click on it in the blueprint editor.

    Be careful though that if you change the empty slot, you won't have an empty slot (easy to do with the likes of Vipers and BMFLs etc)

    Good Luck!

    Leave a comment:


  • replied
    I am having trouble getting the pyro/sparkler, strobes, and lasers to respond in UE. What fixtures are these based off of or what is the setup for those in the DMX controller? i.e. parameters and settings for the channels

    Leave a comment:


  • commented on 's reply
    There were some performance fixes for recording in take recorder that are going into 4.26.1 and I was able to record 20+ universes at a stable framerate but it all depends on what is rendering in the scene as well. You can technically still record with a completely empty level for more performance. You can import data into sequencer tracks if you desire as well.

  • commented on 's reply
    It's possible to do these things, but these are really rendering/graphics/material questions and less about DMX itself. If you want to dig into the master material for the beam shader, you can certainly add in whatever things you would like to see.

  • replied
    Hello
    A question about the Take Recorder. It seems that recording an artnet stream of more than 3 universes causes problems, perhaps because it seems to be writting for all fixtures separately.
    Is there a way to set this, or to import artnet data into Unreal Engine and have it played by the sequencer without passing by the take recorder ?
    This could be of importance for all kind of big scale projects, such as architectural lighting.
    ++

    Leave a comment:


  • replied
    Originally posted by kozakboys View Post
    Hi. I believe I have found a bug within UE4 DMX/Artnet setup. I am trying to get an ArtNet broadcast from Soundswitch (running on a macbook pro laptop) into UE4 running on a PC. I have successfully done this by using Soundswitch on the PC (same CPU as UE4.) The bug comes in here; I can actually get DMX data to show up within the UE4 project DMX monitor, from Soundswitch running on the MBP, and it follows DMX changes correctly, however when I press play the DMX data does not trigger the internal lights. If I use Soundswitch from the PC, data shows up correctly and lights work as well. Am I missing something here? Thanks. fairly new to UE so maybe I'm missing a setup feature within blueprints, etc.
    Heyo,
    I experienced the same issue:
    SoundSwitch seems to send ArtNET on Universe 0 and 1, but the ArtNET-Plugin in UE4 receive only above 0. It's a counting issue from the developers I think. Try to send ArtNET in Universe 2 with SoundSwitch, that should work.
    How do you get a connection between SoundSwitch and UE4? I have to use external programs like DMX Control3, because SoundSwitch only sends Unicast and UE4 receives only Broadcast so far.
    Greetings Tim

    Leave a comment:


  • replied
    hi,

    i came across this plugin today, had to download Unreal right away!

    But there are som questions in my mind:

    *) Is there a way to get a second gobo wheel on a fixture?
    *) Are prisms planned?

    Thanks!
    Stefan

    Leave a comment:


  • replied
    Hi. I believe I have found a bug within UE4 DMX/Artnet setup. I am trying to get an ArtNet broadcast from Soundswitch (running on a macbook pro laptop) into UE4 running on a PC. I have successfully done this by using Soundswitch on the PC (same CPU as UE4.) The bug comes in here; I can actually get DMX data to show up within the UE4 project DMX monitor, from Soundswitch running on the MBP, and it follows DMX changes correctly, however when I press play the DMX data does not trigger the internal lights. If I use Soundswitch from the PC, data shows up correctly and lights work as well. Am I missing something here? Thanks. fairly new to UE so maybe I'm missing a setup feature within blueprints, etc.

    Leave a comment:


  • replied
    I am thoroughly enjoying messing around with the DMX components and the tutorial is excellent. I have been able to sift through my issues and am now working on properly implementing DMX heads. I noticed that there is no prism function, so would this be more equivalent to number of beams, or something else? In addition, the moving head I was working with has a channel for gobo selection & shake, gobo wheel, and gobo spin. When I mapped these, I don't think they worked correctly. Nor did mapping the colors work. I was testing the Elation Artiste Mondrian, which uses CMY, CTO, and RGB. In addition, I do not see a function for CTO adjustment (color temp).
    Last edited by th3thrilld3m0n; 01-14-2021, 12:31 PM. Reason: issues resolved, but have suggestions to improve moving head functions

    Leave a comment:


  • replied
    Hi there,

    Does anyone from the development team know if the GrandMA3 Viz-Key is something that may be supported in the future? It would be an enormous step toward Unreal being a go-to for pre-vis for professionals in the industry.

    https://www.malighting.com/product/g...z-key-4023576/

    Thank you for developing this plugin, exciting stuff!

    Leave a comment:


  • replied
    Does anyone know how to trigger a Niagara FX ( from Realistic Starter VFX Pack Niagara ) with DMX like there is a dimmer channel controlling the start and stop of the fx, Thank you very much I was able to find a solution myself, just took a copy of the Pyro BP en changed the Niagara fx to what I wanted, now everything working like i wished
    Last edited by Cyberke202; 12-23-2020, 01:54 AM.

    Leave a comment:


  • replied
    Originally posted by Olav Verhoeven View Post
    Hi,

    Tested it today with MagicQ, all was clear except when going into Play mode it is very slow responsive when I change settings (color, dimmer, pan,...) on MagicQ, could this be due to fact that I'm running both applications on the same computer (don't have a second computer for the moment!)
    Be sure you set your MagicQ Universe, to visualiser ART/Sacn same PC, if you take another for example Capture the MagicQ becomes very slow, het everything works very fine and fast with correct settings

    Leave a comment:


  • replied
    Hi is there going to be in future updates the possiblity to update the dmx library at runtime or is it possible now
    thank you

    Leave a comment:


  • commented on 's reply
    When you say it crashes while patching, what do you mean exactly? When you are just adding things in the patch of the DMX asset, or something in the level editor. I am curious as I have been using this for months and have not had it be that unstable.

  • commented on 's reply
    Glad you were able to get it going. I want to see this pixel mapped tree!
Working...
X