# ZoneGraph에서 LaneProfile이 다른 ZoneShape과의 연결 방식 문의 

**URL:** <https://forums.unrealengine.com/t/zonegraph-laneprofile-zoneshape/2679268>\
**Category:** 한국어 (Korean)\
**Tags:** unreal-engine, Epic-Pro-Support, question\
**Created:** [October 23, 2025, 2:49am UTC](https://forums.unrealengine.com/t/zonegraph-laneprofile-zoneshape/2679268 "2025-10-23T02:49:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [October 23, 2025, 2:49am UTC](https://forums.unrealengine.com/t/zonegraph-laneprofile-zoneshape/2679268/1 "2025-10-23T02:49:36Z")

</div>

안녕하세요.

​

이미지와 같이 Lane Profiles를 설정하였습니다.

P4\_ForwardOnly\_Small 에서 P4\_ForwardOnly\_Large로 이동을 처리하고 싶으나, 이동이 되지 않는 현상이 발견되어 코드를 살펴보았습니다. FineShapeConnections에서 LaneProfile이 다른 경우 Link가 되지 않아서 이동을 못하고 있음을 파악하였습니다.

StateTree에서 MassZoneGraphPathFollow Task를 사용하여 이동을 할 때, LaneProfile이 다른 Lane로 이동을 처리하는 방법에 대해 문의드립니다.

추가로 LaneProfile이 다르더라도 Tags가 같으면 Connection을 성공으로 판단하게 코드를 수정하고자 하는데 문제 없을지도 문의드립니다.

감사합니다.​

```auto
FZoneGraphBuilder::FindShapeConnections()
{
  if (SourceConnector.LaneProfile != DestConnector.LaneProfile)
}

```

​

[Image Removed]

​

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [October 23, 2025, 2:49am UTC](https://forums.unrealengine.com/t/zonegraph-laneprofile-zoneshape/2679268/2 "2025-10-23T02:49:40Z")

</div>

**Steps to Reproduce**  
[Image Removed]

---

<div class="post-metadata">

**Author:** ![Song\_Chan\_Ho](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/song_chan_ho/32/1066481_2.png) [@Song\_Chan\_Ho](https://forums.unrealengine.com/u/Song_Chan_Ho)\
**Post date:** [October 28, 2025, 9:18am UTC](https://forums.unrealengine.com/t/zonegraph-laneprofile-zoneshape/2679268/3 "2025-10-28T09:18:23Z")

</div>

안녕하세요.

Zone Shape의 Polygon Shape Type은 Point Type을 Lane Profile로 설정할 수 있으며, 양 끝 점을 서로 다른 Lane Profile로 설정이 가능합니다.

이러한 Polygon Shape Type의 특징을 이용하여,

두 Spline Zone Shape 사이에 Polygon Zone Shape를 배치 후, 양 끝 점의 Lane Profile을 질문해주신

P4\_ForwardOnly\_Small, P4\_ForwardOnly\_Large 설정한다면 연결할 수 있습니다.

아래는 첨부해주신 스크린샷을 토대로 두 Lane Profile 동일한 설정을 하여 연결한 사진이며,

Polygon Zone Shape의 Point 설정을 참고하시면 도움이 될 것 같습니다.

[Image Removed]

마지막으로, 아래 ZoneGraph 공식 가이드 문서를 참고하시면 도움이 될 것 같습니다.

> **[ZoneGraph Quick Start Guide | Tutorial](https://dev.epicgames.com/community/learning/tutorials/qz6r/unreal%5C-engine%5C-zonegraph%5C-quick%5C-start%5C-guide)**
>
> A guide to get started using ZoneGraph that covers making Lane Profiles, setting up Zone Shapes, creating intersections, and some general wisdom on work...

감사합니다.
