# Why is my Airplane not following the Custom Path?

**URL:** <https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562>\
**Category:** Getting Started & Setup\
**Tags:** twinmotion, question\
**Created:** [April 29, 2024, 2:35pm UTC](https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562 "2024-04-29T14:35:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mblally8](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@mblally8](https://forums.unrealengine.com/u/mblally8)\
**Post date:** [April 29, 2024, 2:35pm UTC](https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562/1 "2024-04-29T14:35:44Z")

</div>

Hi everyone, I'm a complete newbie so bear with me.

I have a custom path drawn with a gradual slope for an airplane to take off. I'm having a few problems:

1. Why is the plane "popping" off the ground instead of following the gradual slope of my custom path?
2. I noticed when I pull up the last part of my custom path for the slope, part of my custom path warps to go underground. Why is that happening?
3. Why does it look like my plane is falling from the sky when it starts the loop over?

![Plane_Takeoff_AdobeCreativeCloudExpress_AdobeCreativeCloudExpress](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/c/4/ac44d99188d9580f31bdab09d847f80fe42d6757.jpeg)

Thanks for any help!

---

<div class="post-metadata">

**Author:** ![mblally8](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@mblally8](https://forums.unrealengine.com/u/mblally8)\
**Post date:** [April 30, 2024, 12:13am UTC](https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562/2 "2024-04-30T00:13:52Z")

</div>

I found the solution in case anyone is wondering in the future. All I had to do was turn "Physics" off in the object settings of the airplane. Very easy fix.

---

<div class="post-metadata">

**Author:** ![Dollyartasia](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Dollyartasia](https://forums.unrealengine.com/u/Dollyartasia)\
**Post date:** [February 16, 2026, 3:50am UTC](https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562/3 "2026-02-16T03:50:51Z")

</div>

> [@mblally8](#):
>
> Hi everyone, I’m a complete newbie so bear with me.
> 
> I have a custom path drawn with a gradual slope for an airplane to take off. I’m having a few problems:
> 
> 1. Why is the plane “popping” off the ground instead of following the gradual slope of my custom path?
> 2. I noticed when I pull up the last part of my custom path for the slope, part of my custom path warps to go underground. Why is that happening?
> 3. Why does it look like my plane is falling from the sky when it starts the loop over?
> 
> ![Plane_Takeoff_AdobeCreativeCloudExpress_AdobeCreativeCloudExpress](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/c/4/ac44d99188d9580f31bdab09d847f80fe42d6757.jpeg)
> 
> Thanks for any help!

I had a similar issue when I first used custom paths. The plane “popping” off the ground usually means the spline points aren’t smooth, or one of them is set at the wrong height. It helps to check the path from the side view and make sure the slope is even and not dipping underground. The falling effect at the start of the loop can also happen if the starting speed or position resets too suddenly. I’m still learning too, but I’ve seen some simple tips about this on a small site called[flying411](https://flying411.com/), and they mostly suggest checking the path points and start settings first.

---

<div class="post-metadata">

**Author:** ![Jessy800](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Jessy800](https://forums.unrealengine.com/u/Jessy800)\
**Post date:** [April 21, 2026, 2:13pm UTC](https://forums.unrealengine.com/t/why-is-my-airplane-not-following-the-custom-path/1828562/4 "2026-04-21T14:13:42Z")

</div>

Hello, I believe you two are quite close 👍

The plane “popping” off the ground typically occurs when it isn’t following the path smoothly. Rather than traveling smoothly along the curve, it may be hopping between places.  
This is frequently the result of one of the handles or spline points being moved in the incorrect direction for the underground path. Try resetting them or making little adjustments.  
Additionally, the descending appearance at the beginning is most likely just the plane returning to the path’s commencement. To prevent it from appearing to drop, you may need to smooth that reset.
