# White unlit not white?

**URL:** <https://forums.unrealengine.com/t/white-unlit-not-white/294919>\
**Category:** Rendering\
**Tags:** unreal-engine, Rendering, question\
**Created:** [September 30, 2014, 7:42am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919 "2014-09-30T07:42:36Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![Oscar\_Cooke-Abbott](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Oscar\_Cooke-Abbott](https://forums.unrealengine.com/u/Oscar_Cooke-Abbott)\
**Post date:** [September 30, 2014, 7:42am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/1 "2014-09-30T07:42:36Z")

</div>

I have been trying to figure out my problem for ages, but have had no success.

In my simple game almost all objects have a completely white, unlit material applied to them, however they are rendered with a grey colour instead?

I have checked everything I can think of; Post process settings, material instance settings, and the player’s camera itself, and changing any of these things doesn’t change anything, it still becomes grey?

---

<div class="post-metadata">

**Author:** ![Lovecraft\_K](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Lovecraft\_K](https://forums.unrealengine.com/u/Lovecraft_K)\
**Post date:** [September 30, 2014, 2:31pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/2 "2014-09-30T14:31:46Z")

</div>

Hey WarLord -

Try increasing the value of your inputted vector 3 color and set them to over 1,1,1 to 1.5,1.5,1.5 or even 2,2,2. You will want to manage the increase in whiteness and the brightness aspect.

Thank You

Eric Ketchum

---

<div class="post-metadata">

**Author:** ![Oscar\_Cooke-Abbott](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Oscar\_Cooke-Abbott](https://forums.unrealengine.com/u/Oscar_Cooke-Abbott)\
**Post date:** [September 30, 2014, 3:11pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/3 "2014-09-30T15:11:18Z")

</div>

Yes, I have tried this before, however due to the fact that it is unlit and so uses emissive, the excessive colour creates bloom.  
PS. Even in the material editor the material is not white.

---

<div class="post-metadata">

**Author:** ![Lovecraft\_K](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Lovecraft\_K](https://forums.unrealengine.com/u/Lovecraft_K)\
**Post date:** [September 30, 2014, 4:06pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/4 "2014-09-30T16:06:32Z")

</div>

Hey WarLord -

I was able to reproduce this issue and have reported it to our engineers for further investigation, TTP # 348166. I will keep you informed as we investigate this issue.

Thank you

Eric Ketchum

---

<div class="post-metadata">

**Author:** ![Oscar\_Cooke-Abbott](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Oscar\_Cooke-Abbott](https://forums.unrealengine.com/u/Oscar_Cooke-Abbott)\
**Post date:** [October 1, 2014, 1:09am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/5 "2014-10-01T01:09:52Z")

</div>

Thankyou 🙂

---

<div class="post-metadata">

**Author:** ![xerotolerant\_1](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@xerotolerant\_1](https://forums.unrealengine.com/u/xerotolerant_1)\
**Post date:** [August 17, 2015, 7:13pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/6 "2015-08-17T19:13:36Z")

</div>

Was Any kind of solution for this problem reached? I have a similar problem.

---

<div class="post-metadata">

**Author:** ![Lovecraft\_K](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Lovecraft\_K](https://forums.unrealengine.com/u/Lovecraft_K)\
**Post date:** [August 18, 2015, 6:15pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/7 "2015-08-18T18:15:56Z")

</div>

Hello -

This issue is actually not a bug but a function of the post process and physically based rendering. The final color will depend on exposure, the other lighting in the scene, etc. 1,1,1 doesn’t mean that’s the final tonemapped value on screen. That is the intensity of the light being emitted by the surface.

Thank You

Eric Ketchum

---

<div class="post-metadata">

**Author:** ![SCASL](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@SCASL](https://forums.unrealengine.com/u/SCASL)\
**Post date:** [March 20, 2016, 3:36am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/8 "2016-03-20T03:36:29Z")

</div>

Any update?

---

<div class="post-metadata">

**Author:** ![Oscar\_Cooke-Abbott](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Oscar\_Cooke-Abbott](https://forums.unrealengine.com/u/Oscar_Cooke-Abbott)\
**Post date:** [March 20, 2016, 4:40am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/9 "2016-03-20T04:40:22Z")

</div>

As I said at the time (the issue still persists) the cause is not exposure, lighting (unlit anyway) or post processing - this doesnt answer the question of how to make unlit materials proper white without the bloom setting values higher than 1,1,1,1 gives - please stop _accepting_ the answer for me - I will accept an answer when it answers and solves the issue, thanks.

---

<div class="post-metadata">

**Author:** ![PacoChan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/pacochan/32/551539_2.png) [@PacoChan](https://forums.unrealengine.com/u/PacoChan)\
**Post date:** [March 20, 2016, 2:27pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/10 "2016-03-20T14:27:10Z")

</div>

Hi. If you don’t need it, you could try to disable the tonemapper. That way you would get the colors exactly as you intend them to be. You can see a discussion about it here: [Struggle Against Tonemapper](https://forums.unrealengine.com/showthread.php?99478-Struggle-Against-Tonemapper)

---

<div class="post-metadata">

**Author:** ![riverprawn](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@riverprawn](https://forums.unrealengine.com/u/riverprawn)\
**Post date:** [September 1, 2016, 4:53am UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/11 "2016-09-01T04:53:55Z")

</div>

I have this issue too. The link provided by PacoChan solved it.

Create a post process material to replace the Tonemapper.

 ![105188-2016-09-01+(9).png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/3/d/3/3d338324060b95ff210d7eb70404e2d180435796.png)

Then added it to the PostProcessVolume in your Level. You will have the exact color from the unlit materials.

---

<div class="post-metadata">

**Author:** ![Davision](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Davision](https://forums.unrealengine.com/u/Davision)\
**Post date:** [January 11, 2019, 12:40pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/12 "2019-01-11T12:40:58Z")

</div>

This is still not fixed??

Under Film in the Post Process Settings is a setting that is called White Clip, setting it to 2 makes whites white that have regular lit shading with emissive. It however does not fix the issue with Unlit materials. Unlit white is always very greyish. Using 4.21 here.

---

<div class="post-metadata">

**Author:** ![terzut](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@terzut](https://forums.unrealengine.com/u/terzut)\
**Post date:** [May 11, 2019, 2:37pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/13 "2019-05-11T14:37:33Z")

</div>

The answers above helped me a lot, so I will share my improved solution.

[https://forums.unrealengine.com/development-discussion/rendering/71325-struggle-against-tonemapper?99478-Struggle-Against-Tonemapper=](https://forums.unrealengine.com/development-discussion/rendering/71325-struggle-against-tonemapper?99478-Struggle-Against-Tonemapper=)

> **[sRGB Approximations for HLSL](http://chilliant.blogspot.com/2012/08/srgb-approximations-for-hlsl.html?m=1)**
>
> The sRGB color space is non-linear. Many transformations to and from the space require the RGB components to be mapped to a linear form. ...

_Create a Material:_  
Material Domain “Post Process”  
Blendable Location “Replacing the Tonemapper”

From now it depends what you want. If you have a Material which is unlit and only using emmissive color, lets say RGBA = 1,1,1,1 (white). And if you want exactly this, add in Post Process Material “SceneTexture:PostProcessInput0” and connect color to emissive color, done!

![276603-exactcolor.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/6/6/e/66e88965220fa8335aacc951a789be02627f7d2c.png)

The math above is used for Gamma Correction, the example image above is sRGB Gamma Correction. If you insert RGB but want sRGB you can apply Gamma Correction like @riverprawn posted. I have done this for every channel because there is a case missing.

 ![276604-rgb-to-srgb.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/9/7/7974c1fc7674224958ac6ed6f23a5f25a90e4535.png)

And the reverse would be, your unlit material emmisive color is sRGB and you want RGB:

 ![276605-srgb-to-rgb.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/d/8/2/d821a2b49fe16ad2aa56d405230e903c32545d0e.png)

The Gamma Correction is sRGB but maybe you want another. This is a good source:  
[http://www.brucelindbloom.com/index.html?Eqn\_RGB\_XYZ\_Matrix.html](http://www.brucelindbloom.com/index.html?Eqn_RGB_XYZ_Matrix.html)

---

<div class="post-metadata">

**Author:** ![DesignerJoon](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@DesignerJoon](https://forums.unrealengine.com/u/DesignerJoon)\
**Post date:** [June 20, 2022, 4:47pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/14 "2022-06-20T16:47:30Z")

</div>

I know this thread is very old, but for anyone searching solution.

Set Post Process Film properties:  
Slope = 1  
Toe = 1  
Shoulder = 1  
Black Clip = 0 (or doesn’t matter)  
White Clip = 1

You can get true white (1, 1, 1) without replacing tonemapper (if you didn’t set other color factors like white balance or tint things.). And, of course, it changes entire scene color and mood.

---

<div class="post-metadata">

**Author:** ![PascalvanUffelen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@PascalvanUffelen](https://forums.unrealengine.com/u/PascalvanUffelen)\
**Post date:** [May 28, 2023, 10:32pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/15 "2023-05-28T22:32:37Z")

</div>

Camera-\> Exposure-\> Advanced-\> Low Percent-\> 100

---

<div class="post-metadata">

**Author:** ![Ari\_Epic](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ari_epic/32/956630_2.png) [@Ari\_Epic](https://forums.unrealengine.com/u/Ari_Epic)\
**Post date:** [March 18, 2026, 1:27pm UTC](https://forums.unrealengine.com/t/white-unlit-not-white/294919/16 "2026-03-18T13:27:55Z")

</div>

This is caused by the Filmic Tonemapper in Unreal, specifically the Tone Curve, an S-shaped filmic curve in the tonemapper. It compresses values near 1.0 to a curve to prevent clipping to pure white, meaning that pure white (1.0) input comes out as roughly 0.95, or a bit gray.

[Color Grading and the Filmic Tonemapper in Unreal Engine | Unreal Engine 5.7 Documentation | Epic Developer Community](https://dev.epicgames.com/documentation/en-us/unreal-engine/color-grading-and-the-filmic-tonemapper-in-unreal-engine#filmsettings)

To enable full brightness while still enjoying all the other benefits of the Tonemapper, create a post-process volume and check “Infinite Extent (unbound)” so it applies to the entire level instead of just the volume. Then, set the “Film - Shoulder” parameter to `1`.

If you’d rather fully skip the Tone Curve for a completely pixel-perfect color matching, you can instead set the prost-process volume’s “Color Grading - Misc - Tone Curve Amount” to 0, and “Expand Gamut” to 0.

Auto Exposure in your project settings also affects brightness, so either turn it off or use “EyeAdaptationInverse” in your unlit material to account for it.

Local Exposure can also affect the brightness, you can turn that off by putting this into your `DefaultGame.ini` file:

```ini
[ConsoleVariables]
r.LocalExposure=0

```

And turn off Bloom if you don’t need it.

If you only want some objects in your scene not to have any color grading, you can alternatively use a stencil buffer: [Using Custom Stencil to Selectively Bypass Postprocessing | Epic Developer Community](https://dev.epicgames.com/community/learning/tutorials/LEKn/unreal-engine-using-custom-stencil-to-selectively-bypass-postprocessing)
