# VR Teleportation Z height to low 

**URL:** <https://forums.unrealengine.com/t/vr-teleportation-z-height-to-low/2701412>\
**Category:** XR Development\
**Tags:** unreal-engine, question\
**Created:** [February 21, 2026, 2:20pm UTC](https://forums.unrealengine.com/t/vr-teleportation-z-height-to-low/2701412 "2026-02-21T14:20:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ProcyonB](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ProcyonB](https://forums.unrealengine.com/u/ProcyonB)\
**Post date:** [February 21, 2026, 2:20pm UTC](https://forums.unrealengine.com/t/vr-teleportation-z-height-to-low/2701412/1 "2026-02-21T14:20:25Z")

</div>

I’m having an issue in my ArchViz UE 5.7 project where when I teleport to a location I am ‘too low’ vs my height in reality.

I am using the default VRTemplate feature pack imported into my Blank Architectural project. The only modification I have made is to adjust the Cell Height in the Navigation Mesh to 1 so that the Navigation Mesh was properly touching the floor (otherwise it was floating above the floor even with the Draw Offset set to 0).

My playerstart location is at Z=0 and when I load the game, my height is correct (and when I touch the floor my hand doesn’t go through it). However, when I teleport I am then too low.

When troubleshooting this, I loaded up the Virtual Reality template project and I noticed when teleporting I wasn’t having the same issue. Looking at the Navigation Mesh in this project, it is floating off the floor by 8cm (draw offset = 0). Seemly by coincidence based off the Cell Height and the Z Brush Size in the NavMeshVolume settings. This 8cm offset seems to correct for the teleport putting you too low.

My question - does anyone know why the default VR template teleportation puts you too low. It seems wrong to have to fix this by either applying an 8cm Z offset into the teleportation blueprint or artificially offsetting the Navigation Mesh.

---

<div class="post-metadata">

**Author:** ![VictorLerp](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/victorlerp/32/738381_2.png) [@VictorLerp](https://forums.unrealengine.com/u/VictorLerp)\
**Post date:** [February 23, 2026, 5:07pm UTC](https://forums.unrealengine.com/t/vr-teleportation-z-height-to-low/2701412/2 "2026-02-23T17:07:38Z")

</div>

This is a caveat of how Project Point to Navigation works (see TeleportTrace function in BP\_XRPawn). NavMesh provides a simple way to create allow/deny Volumes for gameplay, but you can use the Predict Projectile Path hit result directly and use something like Collision Profiles to allow/deny teleportation instead. I’ve done this on multiple projects when dealing with “real-world” environment scale and sizes
