# Unreal Engine rivers don't work with world partition?

**URL:** <https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966>\
**Category:** Blueprint\
**Tags:** unreal-engine, bug-report, Rendering, Blueprint, question\
**Created:** [December 5, 2023, 11:50am UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966 "2023-12-05T11:50:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ArnoldPopescu](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ArnoldPopescu](https://forums.unrealengine.com/u/ArnoldPopescu)\
**Post date:** [December 5, 2023, 11:50am UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/1 "2023-12-05T11:50:01Z")

</div>

Hello everybody!  
Does anyone have an idea why rivers don’t work with world partition?  
The rivers remain permanently visible when the world partition is activated  
Specifically, I use the water system from unreal engine, and I use the UE5.2.1 version

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/9/e/0/9e070bef672f2cccd3f5eff6b201fca273f005fa.jpeg)

---

<div class="post-metadata">

**Author:** ![BigaCubensis](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@BigaCubensis](https://forums.unrealengine.com/u/BigaCubensis)\
**Post date:** [March 12, 2024, 10:32am UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/2 "2024-03-12T10:32:00Z")

</div>

Did you figure this out?  
I’m also very curious how it is supposed to work - AFAIK Unreal decides to load spatial actors according to their bounding box (though you can switch to actor location) and a long, meandering river can have a huge bounding box so it may look like always loaded.  
Anyway, the water system unfortunately is still experimental with lot of issues ☹

---

<div class="post-metadata">

**Author:** ![ArnoldPopescu](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ArnoldPopescu](https://forums.unrealengine.com/u/ArnoldPopescu)\
**Post date:** [March 12, 2024, 10:36am UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/3 "2024-03-12T10:36:03Z")

</div>

Hello!  
Unfortunately, I did not manage to make it work

---

<div class="post-metadata">

**Author:** ![BigaCubensis](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@BigaCubensis](https://forums.unrealengine.com/u/BigaCubensis)\
**Post date:** [March 20, 2024, 4:44pm UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/4 "2024-03-20T16:44:40Z")

</div>

I’m not sure it solves your problem but I came to the following solution in many bloody hours 🙂

First I created own blueprint based on Unreal’s River Body BP and I switched off “Affects Landscape” by default and I added this version to the map to avoid breaking World Partition. (Some defaults like river materials need to setup again, seems it not initialized correctly if I use this child class)  
Second important thing I also disabled “Affect Height Map” in the Water Brush Manager.  
Now my rivers are loading/unloading with tile and no more full landscape loaded issue.  
Of course it means landscape will not affected, but it wasnt an issue for me as I’m working with presculpted river beds.

P.S. found a topic about it, it adds you need also delete Water Brush Manager which will be regenerated next editor start.

> [@WorldPartition Proxies Stuck Loaded After Adding Water Body](https://forums.unrealengine.com/t/worldpartition-proxies-stuck-loaded-after-adding-water-body/1293263/2):
>
> For anyone else who may come across this: It seems to be the Landscape\_WaterBrush specifically that was messing with the world partition proxies’ Load/Unload behavior. With this removed, they started working again properly and, when the level is opened, are in their correct state. The WaterBrush is generated every time a WaterBody is placed, along with a new Water Edit Layer in the landscape, as they’re required for the landscape deformation. My workaround: Delete all that. Make a new BP de…

---

<div class="post-metadata">

**Author:** ![ArnoldPopescu](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ArnoldPopescu](https://forums.unrealengine.com/u/ArnoldPopescu)\
**Post date:** [March 20, 2024, 5:04pm UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/5 "2024-03-20T17:04:03Z")

</div>

Hello!  
Thanks for the information, unfortunately I want the river to affect the landscape

---

<div class="post-metadata">

**Author:** ![Flutebox](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Flutebox](https://forums.unrealengine.com/u/Flutebox)\
**Post date:** [July 20, 2024, 5:22am UTC](https://forums.unrealengine.com/t/unreal-engine-rivers-dont-work-with-world-partition/1481966/6 "2024-07-20T05:22:50Z")

</div>

Hi,

I made a temp work-around by defining a specific grid called ‘WaterGrid’, that has a very small loading range.  
Luckilly rivers and lakes connect quite well (if you set the spline settings at the end points exactly the same for a river, otherwise you get strange flow visual issues), so you can split your big river into smaller pieces & load them seperately.

Hope this helps for now.

Kr, Flutebox
