# Twinmotion entfernt Modellteile, nach Neustart

**URL:** <https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821>\
**Category:** Deutsch (German)\
**Tags:** twinmotion, question\
**Created:** [December 1, 2025, 3:58pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821 "2025-12-01T15:58:28Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![DennisStolar](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/dennisstolar/32/882663_2.png) [@DennisStolar](https://forums.unrealengine.com/u/DennisStolar)\
**Post date:** [December 1, 2025, 3:58pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/1 "2025-12-01T15:58:28Z")

</div>

Moin Leute,

ich habe seit dem Upgrade auf die Version 2025.2 das Problem, das mir Twinmotion nach Projektimport, entweder durch Direct-Link/ DataSmith etc, nach jedem erneuten öffnen des Projektes (bspw. am Folgetag) Teile meiner Architektur einfach weglöscht.

Jeden Tag entdecke was neues, was eigentlich in meinem Modell sein sollte aber einafch vom Program geschluckt wurde.

Dachte erst ich könnte es durch die Komprimierung durch nanite in Griff bekommen aber Fehlanzeige. Nach jedem Neustart fehlen wichtige Komponeneten in meinem Modell. Diesen Bug, gab ies in den Vorgängerversionen nicht.

Erhoffe mir das mir einer von Euch ggf helfen kann, denn ich bin mit meinem Latein mittlerweile schon am Ende. Macht kein Spaß sowas 🙂‍↕️

_Since upgrading to version 2025.2, I have been experiencing an issue where Twinmotion simply deletes parts of my architecture after importing a project, either via Direct Link/DataSmith, etc., every time I reopen the project (e.g. the following day)._

_Every day, I discover something new that should actually be in my model but has simply been swallowed up by the programme._

_At first, I thought I could get it under control by compressing it with Nanite, but no luck. After every restart, important components are missing from my model. This bug did not exist in previous versions._

_I hope that one of you can help me, because I’m at my wit’s end. It’s no fun at all 🙂‍↕️_

Greatings

Dennis

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [December 26, 2025, 12:25pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/2 "2025-12-26T12:25:30Z")

</div>

hello dennis merry Christmas !!! first sellect all the models you have problem and try to hide and unhide in 3d program you use and synchronize with direct link. tell me if that works!

---

<div class="post-metadata">

**Author:** ![DennisStolar](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/dennisstolar/32/882663_2.png) [@DennisStolar](https://forums.unrealengine.com/u/DennisStolar)\
**Post date:** [January 6, 2026, 3:49pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/3 "2026-01-06T15:49:38Z")

</div>

Hey Jim,

Thanks for the Christmas wishes, hope you had a good start to the new year.

When I locate the hidden objects, I can’t disable them using the eye icon. They always remain visible, at least according to the scene editor. However, you can’t see them in Twinmotion. If I delete them and reload them via the DataSmith import, for example, everything works as usual. Until I save and close Twinmotion. After restarting, the elements are missing again and I have to run the DataSmith import again.

The error occurs more frequently with opening elements, windows, and skylights.

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [January 9, 2026, 1:44pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/4 "2026-01-09T13:44:31Z")

</div>

hello denis now i understand your problem, you must turn off synchronize from sketchup first after unable the model you disappear and synchronize again (example open tw and sk find the model not displayed in tm turn off sync disable the model from sk turn on sync after turn off anable the model and sync again and look in tm ) i hope this help

---

<div class="post-metadata">

**Author:** ![thommesk](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/thommesk/32/1193710_2.png) [@thommesk](https://forums.unrealengine.com/u/thommesk)\
**Post date:** [June 8, 2026, 6:45am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/5 "2026-06-08T06:45:24Z")

</div>

hier das gleiche, das augen symbol kann nicht ausgeschaltet werden [invisible objects ...](https://forums.unrealengine.com/t/invisible-objects/2723757)

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [June 15, 2026, 10:48am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/6 "2026-06-15T10:48:18Z")

</div>

try to off synchronize enable to object and synchronize again

---

<div class="post-metadata">

**Author:** ![thommesk](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/thommesk/32/1193710_2.png) [@thommesk](https://forums.unrealengine.com/u/thommesk)\
**Post date:** [July 15, 2026, 12:34pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/7 "2026-07-15T12:34:55Z")

</div>

> [@jim\_s](#):
>
> n off synchronize from sketchup first after unable the model you disappear and synchronize again (example open tw and sk find the model not displayed in tm turn off sync disable the model from sk turn on sync after turn off anable the model and sync again and look in tm ) i hope this help

thanks polycg …i have no synchronizing. i import from blender as .glb. in the beginning working with TM i imported .fbx but there, animations did not work correctly.

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [July 17, 2026, 8:36am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/8 "2026-07-17T08:36:38Z")

</div>

if you don’t have synchronization button you must download sync plugin from epic [https://www.twinmotion.com/plugins](https://www.twinmotion.com/plugins) for your 3d program you use

---

<div class="post-metadata">

**Author:** ![thommesk](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/thommesk/32/1193710_2.png) [@thommesk](https://forums.unrealengine.com/u/thommesk)\
**Post date:** [July 20, 2026, 12:56pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/9 "2026-07-20T12:56:00Z")

</div>

hi, i DONT want to synchronize…all i want is that objects dont get deleted as it seems and rest as dead shadowobjects or whatever that is…an object that is seen in the szene but has no more faces.

see my first post here, if you want, load the verysmall scene or have a look at the screencapture film there

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [August 4, 2026, 10:12am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/10 "2026-08-04T10:12:16Z")

</div>

hello [thommesk](https://dev.epicgames.com/community/api/user_profiles/tab-redirect/about?discourse_username=thommesk) can you please send me the skp file or what ever program you use ?

---

<div class="post-metadata">

**Author:** ![thommesk](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/thommesk/32/1193710_2.png) [@thommesk](https://forums.unrealengine.com/u/thommesk)\
**Post date:** [August 17, 2026, 2:14pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/11 "2026-08-17T14:14:00Z")

</div>

oh sorry, did not see your post, and i think i did not even got a message from the forum…

> [@invisible objects ...](https://forums.unrealengine.com/t/invisible-objects/2723757):
>
> hi, any idea why objects are in scene but are not visible anymore, they have no transparent material, ! they cannot be hidden with the “eye” symbol ! ? where are they? in attachment i have a file with 2 missing objects thanks for help! [r-test.tm](https://forums.unrealengine.com/uploads/short-url/5qqIjaVfBFrHYgWXBKaplLHCGSF.tm) (3.1 MB)

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [August 20, 2026, 4:30pm UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/12 "2026-08-20T16:30:29Z")

</div>

i need the sketchup file sorry the files not exist

---

<div class="post-metadata">

**Author:** ![thommesk](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/thommesk/32/1193710_2.png) [@thommesk](https://forums.unrealengine.com/u/thommesk)\
**Post date:** [August 27, 2026, 7:57am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/13 "2026-08-27T07:57:34Z")

</div>

which file does not exist. download the r-test.tm file and open it in twinmotion. this file exists and is downloadable…, there is no sketchup file, i dont need sketchup, i work with blender. and the error has nothing to do with sketchup or blender !!

there is nothing synchronized with anything. only imported. and parts get LOST, as you can see in the “r-test.tm” file

it is exactly the same behaviour as dennis described above:

“When I locate the hidden objects, I can’t disable them using the eye icon. They always remain visible, at least according to the scene editor. However, you can’t see them in Twinmotion”

---

<div class="post-metadata">

**Author:** ![jim\_s](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/jim_s/32/1170636_2.png) [@jim\_s](https://forums.unrealengine.com/u/jim_s)\
**Post date:** [August 27, 2026, 11:01am UTC](https://forums.unrealengine.com/t/twinmotion-entfernt-modellteile-nach-neustart/2680821/14 "2026-08-27T11:01:45Z")

</div>

that exactly i mean send me the blender file its not twinmotion problem for some reason you have hide from blender
