# 포인트 클라우드 편집 좀 되게 업데이트해주세요.

**URL:** <https://forums.unrealengine.com/t/topic/2537139>\
**Category:** 한국어 (Korean)\
**Tags:** realityscan\
**Created:** [June 2, 2025, 1:51am UTC](https://forums.unrealengine.com/t/topic/2537139 "2025-06-02T01:51:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![scanmanO3O](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@scanmanO3O](https://forums.unrealengine.com/u/scanmanO3O)\
**Post date:** [June 2, 2025, 1:51am UTC](https://forums.unrealengine.com/t/topic/2537139/1 "2025-06-02T01:51:53Z")

</div>

RC는 정렬하고 포인트클라우드 상태에서 편집이 안되는게 너무 불편합니다.  
메타쉐이프처럼 편집되도록 업데이트해줬으면 좋겠어요!  
이부분은 툴적으로 너무 차이 납니다.  
위 아래 각각 스캔한 뒤 바닥부분을 잘라서 간편하게 정렬하면 좋은데  
이 기능이 없으니 반드시 마스크를 해야하는 불편함이 있어요!  
그밖에도 찌꺼기를 미리 지워서 메쉬로 변환하지 않게 한다던가 유용하게 사용할 여지가 많은데 업데이트 계획 없나요?

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [June 2, 2025, 6:55am UTC](https://forums.unrealengine.com/t/topic/2537139/2 "2025-06-02T06:55:38Z")

</div>

Hello @scanmanO3O  
Which scanning method do you mean? Photogrammetry or laser scanning?  
Regarding the debris, there is a setting for it already. It is called Remove marginal triangles and can be find under MESH MODEL/Create Model/Settings/Mesh Calculation  
What exactly do you mean by: it can’t be aligned and edited in the point cloud state. ?

---

<div class="post-metadata">

**Author:** ![scanmanO3O](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@scanmanO3O](https://forums.unrealengine.com/u/scanmanO3O)\
**Post date:** [June 10, 2025, 12:10am UTC](https://forums.unrealengine.com/t/topic/2537139/3 "2025-06-10T00:10:21Z")

</div>

라이다 스캔이든 포토스캔이든 정렬하고 난 후 보여지는 포인트를 편집하는 방법을 말하는 거 였어요.

첨부한 사진처럼 영역으로 조절만 가능할뿐 그 안에 부분적인 포인트 편집이 안돼요.

제가 모르는 방법이 있나요?

RC는 메쉬로 변환해야만 편집이 되는걸로 알고 있습니다.

I was talking about how to edit the points that are shown after alignment, whether it is a lidar scan or a photo scan.

As shown in the attached photo, only the area can be adjusted, and partial point editing within it is not possible.

Is there a way that I don’t know about?

I know that RC can only be edited by converting it to a mesh.

 ![RC_point](https://d3kjluh73b9h9o.cloudfront.net/original/4X/6/1/0/610830430373c7f1a59347913e56ccebc1d1309d.jpeg)

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [June 10, 2025, 7:03am UTC](https://forums.unrealengine.com/t/topic/2537139/4 "2025-06-10T07:03:32Z")

</div>

You’re right, this is not possible to do. You can modify only mesh, not the sparse point cloud.
