# TextureGraph inputs disconnect after closing the graph

**URL:** <https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037>\
**Category:** Programming & Scripting\
**Tags:** unreal-engine, bug-report\
**Created:** [October 25, 2026, 4:57pm UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037 "2026-10-25T16:57:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![fx.anorak](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/fx.anorak/32/1134077_2.png) [@fx.anorak](https://forums.unrealengine.com/u/fx.anorak)\
**Post date:** [October 25, 2026, 4:57pm UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037/1 "2026-10-25T16:57:44Z")

</div>

Hello there!

I have tried to add Scalars as inputs to a Levels node and then save the Graph. When I open it again, it then seem to be disconnected.  
Am I doing something wrong or is this a bug?

Best regards,  
fx\_an0rak

---

<div class="post-metadata">

**Author:** ![ChenDong](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ChenDong](https://forums.unrealengine.com/u/ChenDong)\
**Post date:** [October 26, 2026, 10:46am UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037/2 "2026-10-26T10:46:54Z")

</div>

You are not wiring it wrong. The Levels node’s min / max / mid pins are rebuilt when the graph reopens, and links into those pins get dropped on load. Nodes with fixed pins keep their wires, which is why it looks like only Levels forgets the connection.

What actually sticks:

1. Don’t plug scalars straight into Levels. Add Scalar parameters from the graph’s Input list, and do the adjustment with nodes whose pins are stable: Multiply or Add for gain and bias, or a Lerp / remap from the black point to the white point. Feed the scalar parameters into that chain. Those links survive save and reopen.

2. If you specifically want the Levels control, type the values on the Levels node itself instead of wiring them, and put any per-texture variation on a node in front of it (Brightness, Contrast, Clamp) that does keep its connections.

3. Save the Texture Graph asset, not just the preview. The disconnect still happens on Levels even after a real asset save, which is how you can tell it is the node rather than an unsaved graph. Applying / exporting the texture before you close only bakes the current result; it does not preserve the wires.

I would treat “Levels inputs clear on reopen” as an engine issue and keep the adjustment on Multiply/Add, or as values typed on the node, until a later version fixes that pin.

---

<div class="post-metadata">

**Author:** ![BRGEzedeRocco](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/brgezederocco/32/1216890_2.png) [@BRGEzedeRocco](https://forums.unrealengine.com/u/BRGEzedeRocco)\
**Post date:** [October 26, 2026, 5:28pm UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037/3 "2026-10-26T17:28:27Z")

</div>

Hello @fx.anorak ,  
Could you share a screenshot or a video showing the logic you’re using and what happens after saving and reopening the Graph?

It would help better understand the issue.

I’ll be waiting for your reply!

---

<div class="post-metadata">

**Author:** ![fx.anorak](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/fx.anorak/32/1134077_2.png) [@fx.anorak](https://forums.unrealengine.com/u/fx.anorak)\
**Post date:** [October 27, 2026, 12:42pm UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037/4 "2026-10-27T12:42:40Z")

</div>

Hello!

Here is what I am trying to do:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/0/f/7/0f73dc37e057f812edb2ca831e054813eda99562.jpeg)

Here is how the same looks after I close the graph and reopen it immediately:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/5/8/7587d0a7ff1ca4762aea0529ea91d2cbe5dc088b.jpeg)

---

<div class="post-metadata">

**Author:** ![BRGEzedeRocco](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/brgezederocco/32/1216890_2.png) [@BRGEzedeRocco](https://forums.unrealengine.com/u/BRGEzedeRocco)\
**Post date:** [October 29, 2026, 5:31pm UTC](https://forums.unrealengine.com/t/texturegraph-inputs-disconnect-after-closing-the-graph/2845037/5 "2026-10-29T17:31:59Z")

</div>

Hey @fx.anorak , Hello again ,  
I tried several solutions to identify the cause of the problem.

The first thing I thought was that it could be caused by an incorrect loading phase for the Texture Graph plugin, but changing it did not solve the problem.

> [@Plugin interface disappears on editor restart](https://forums.unrealengine.com/t/plugin-interface-disappears-on-editor-restart/530292/3?utm_source=chatgpt.com):
>
> Hey! I didn’t really solve it but I found a workaround if you’re using C++! I was able to #include the plugin files to the C++ version of my character class and add the interface there. Now it does not reset when I restart the editor

I also discovered that you don’t need to close Unreal Engine to reproduce it: simply closing the Texture Graph editor causes the Scalar node to disconnect from Levels, and the pin it was connected to disappears from the node, whether it’s Low, Mid, High, Out Low, or Out High. No errors appear in the Output Log.

I then tried connecting Scalar to other nodes, such as Threshold and NormalFromHeightMap, and I couldn’t reproduce the same issue. When you close and reopen those graphs, the connections remain intact. Therefore, the problem seems to be specifically related to the Levels node.

I also discovered that if you change the Levels mode from Manual to Auto Levels and then switch back to Manual, the pins and values reappear. Additionally, even when the values disappear from the Levels node’s interface, they are still available in the Deatils panel.

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/b/b/0/bb06091e242babb842060441993327f95f1feb3e.png)

As a workaround, I recommend modifying the values directly in the Levels node, without using Scalar or other nodes as inputs, since the problem seems to be related to a bug in the plugin.

In summary, this appears to be a bug in the Texture Graph plugin that causes connections between Levels and other nodes, such as Scalar or Multiply, to break. I’m sharing these details in case they’re useful for your investigation and also so that, if you open a ticket, you can provide more information about the issue.
