# \[SUPPORT\] Advanced Turn Based Tile Toolkit

**URL:** <https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930>\
**Category:** UE Marketplace\
**Tags:** unreal-engine, fab\
**Created:** [February 26, 2015, 8:30am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930 "2015-02-26T08:30:16Z")\
**Posts on this page:** 20\
**Page:** 197

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 21, 2021, 11:36pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4031 "2021-11-21T23:36:02Z")

</div>

> [@](#):
>
> Then set the location of the PlayerStart actor to wherever you want.

thankyou. can you told what system or plagyn for save and load you use in game for this asset ?

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 23, 2021, 7:36am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4032 "2021-11-23T07:36:17Z")

</div>

good day i found an interted problem i can push with mouse if is an invizible hex

 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/4/5/453a24c03775daea4ee476ca9f621e6efa84212e.jpeg)  
 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/3/3330fb6cb9a6cee487c376ab2a34f8e5b9ca3a3f.jpeg)

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [November 24, 2021, 2:45pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4033 "2021-11-24T14:45:51Z")

</div>

> [@ser.man94](#):
>
> thankyou. can you told what system or plagyn for save and load you use in game for this asset ?

It depends a lot on your game, really. For my own projects I code the saving and loading myself without using any particular plugin. What is it you need to save or load?

> [@ser.man94](#):
>
> good day i found an interted problem i can push with mouse if is an invizible hex
> 
> ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/4/5/453a24c03775daea4ee476ca9f621e6efa84212e.jpeg)  
> ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/3/3330fb6cb9a6cee487c376ab2a34f8e5b9ca3a3f.jpeg)

Sorry, I’m afraid I don’t understand the question. Could you describe it in a different way?

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 24, 2021, 8:10pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4034 "2021-11-24T20:10:44Z")

</div>

> [@](#):
>
> Sorry, I’m afraid I don’t understand the question. Could you describe it in a different way?

the cursor not alow to push on grid if is covered by invisible blueprint. not a problem i cheange size of hex and work greate.

 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/4/8/480d226d2cd4d28e9f4aa204950cb9c8f727e384.jpeg)

Can you told please how to turn of walking befor shoot. then range unit unit make some steps and then shoot.

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [November 25, 2021, 2:10pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4035 "2021-11-25T14:10:03Z")

</div>

> [@ser.man94](#):
>
> you told please how to turn of walking befor shoot. then range unit unit make some steps and then shoot.

Sorry, don’t completely understand this one either. You want to make it so ranged units should not be allowed to move before after they shoot?

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 25, 2021, 4:58pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4036 "2021-11-25T16:58:11Z")

</div>

> [@](#):
>
> Sorry, don’t completely understand this one either. You want to make it so ranged units should not be allowed to move before after they shoot?

yes

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [November 27, 2021, 8:23pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4037 "2021-11-27T20:23:27Z")

</div>

Give this ability to one of your ranged units and set its CurrentAP and MaxAP to 2. Set bUseEndsTurn in this ability to false. See if it gives you the result you want.

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/3X/9/a/9ae4459e67f0dcfb0a7581b6741a565b153505af.png)

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 27, 2021, 10:37pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4038 "2021-11-27T22:37:49Z")

</div>

i have the question i have simple comand to set camera location and actor location after i load the level what is need to add for the variablei? i save the actor location and camera location and it work for simle object.

 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/f/2/f2fbc839e5c114687a2314680e90334aa0f24205.png)  
 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/9/9/99c4211d05d60c5d9df71e95b80c63108feed28f.png)  
on game not olk from the same point  
 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/8/7/87f54276ee0df1a9dbc50ade5990c671d2258de3.jpeg)

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 27, 2021, 11:22pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4039 "2021-11-27T23:22:27Z")

</div>

no. the unit walk and then shoot.

 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/5/4/540b8f41f033eeaf9c65421aaa52171f9a8e2f4d.jpeg)  
or unit cant wolk

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 30, 2021, 4:52am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4040 "2021-11-30T04:52:28Z")

</div>

god day. I make the changes for range retur attak and not work

 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/6/f/6fd87101e96a561622a2d4f79b18e92e5cea6610.jpeg)  
 ![изображение](https://d3kjluh73b9h9o.cloudfront.net/original/3X/6/6/669e8ad96d3810d528eeaf494d879e76e1655346.jpeg)  
is need to ad somethin alse?

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [November 30, 2021, 7:04pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4041 "2021-11-30T19:04:40Z")

</div>

Ok, so a few different questions now. I’ll try my best to answer.

For setting the location of the GridCamera my suggestion is to remove the part of the code in BeginPlay of that sets its location. Then you can simply add a PlayerStart actor to the map and the camera will start at that location.

As for the ranged attack code I sent you, I think I sent you all you need. Did you remember to disable bUseEndsTurn, set the unit’s AP to 2 and assign the new ability to the unit?

---

<div class="post-metadata">

**Author:** ![ser.man94](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ser.man94](https://forums.unrealengine.com/u/ser.man94)\
**Post date:** [November 30, 2021, 7:33pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4042 "2021-11-30T19:33:38Z")

</div>

bUseEndsTurn yes but the unit range attack 2 times no return atack

camera position and player position are saved before load other map and afte load level bac the unit and camera location are not load.  
i need 2 attak and 2 shoot but is need to return attack after first atack

> **[2021-11-30\_21-35-54.mkv (video)](https://drive.google.com/file/d/16GW1aRlixYe--oo7x4kuGTAguhA-YzIR/view?usp=sharing)**
>
> Google Drive file.

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [December 2, 2021, 8:13pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4043 "2021-12-02T20:13:09Z")

</div>

> [@ser.man94](#):
>
> bUseEndsTurn yes but the unit range attack 2 times no return atack
> 
> camera position and player position are saved before load other map and afte load level bac the unit and camera location are not load.  
> i need 2 attak and 2 shoot but is need to return attack after first atack
> 
> [2021-11-30\_21-35-54.mkv - Google Drive](https://drive.google.com/file/d/16GW1aRlixYe--oo7x4kuGTAguhA-YzIR/view?usp=sharing)

hi, I’m sorry but there are so many different things you want at once that I’m struggling to keep it all straight in my head. Could you join the Discord so that we can chat there? Then we can talk back and forth and it might be easier for me to understand.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_5acc7b24](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_5acc7b24](https://forums.unrealengine.com/u/anonymous_user_5acc7b24)\
**Post date:** [December 8, 2021, 5:42am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4044 "2021-12-08T05:42:46Z")

</div>

Hi, I’m back. =)

I just have a quick question which I understand is a very frequently asked question, but I still couldn’t clear up my confusion after searching the forum and discord.

So, I’m trying to spawn units at runtime at spawn points.

 ![spawn1](https://d3kjluh73b9h9o.cloudfront.net/original/3X/7/a/7acedc7e6a9517447af32e0c61cc1b989b065c7c.png)

If I just slap a spawn actor from class node in there like above, it seems to get the job done, but the abilities are doubled:

 ![spawn2.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/8/4/8429c79ccbf74c34534e85a015faba56d4334e75.jpeg)

I found the culprit here:

 ![spawn3](https://d3kjluh73b9h9o.cloudfront.net/original/3X/1/f/1ffa72c3502bce19a458626d161c4811409d9fe7.png)

If I disconnect the setup ability system node, it resolves the double ability problem.

What problems will I run into if I simply disconnet this?

(And also, now that I found the Handle Unit Spawning function, I wonder if I’m even doing it right above.

Should I instead directly call the Handle Unit Spawning function to spawn my units at runtime? I’m a bit confused)

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [December 9, 2021, 8:46pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4045 "2021-12-09T20:46:23Z")

</div>

> [@anonymous\_user\_5acc7b24](#):
>
> Hi, I’m back. =)
> 
> I just have a quick question which I understand is a very frequently asked question, but I still couldn’t clear up my confusion after searching the forum and discord.
> 
> So, I’m trying to spawn units at runtime at spawn points.
> 
> ![spawn1](https://d3kjluh73b9h9o.cloudfront.net/original/3X/7/a/7acedc7e6a9517447af32e0c61cc1b989b065c7c.png)
> 
> If I just slap a spawn actor from class node in there like above, it seems to get the job done, but the abilities are doubled:
> 
> ![spawn2.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/8/4/8429c79ccbf74c34534e85a015faba56d4334e75.jpeg)
> 
> I found the culprit here:
> 
> ![spawn3](https://d3kjluh73b9h9o.cloudfront.net/original/3X/1/f/1ffa72c3502bce19a458626d161c4811409d9fe7.png)
> 
> If I disconnect the setup ability system node, it resolves the double ability problem.
> 
> What problems will I run into if I simply disconnet this?
> 
> (And also, now that I found the Handle Unit Spawning function, I wonder if I’m even doing it right above.
> 
> Should I instead directly call the Handle Unit Spawning function to spawn my units at runtime? I’m a bit confused)

Hi ShinyTessaract, been a while! This is a known issue and I will be including a fix in my next update. I’m planning to make a solution that is a bit cleaner, but until then this is a patch job that should get the job done and not cause any issues:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/3X/d/c/dc7b1fd7ddf44e1dece58d91585b3d8a841bbc3d.png)

HandleUnitSpawning will run automatically when you spawn a unit as it is part of BP\_Unit’s construction script.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_5acc7b24](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_5acc7b24](https://forums.unrealengine.com/u/anonymous_user_5acc7b24)\
**Post date:** [December 10, 2021, 2:16am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4046 "2021-12-10T02:16:29Z")

</div>

Perfect, that fixed it! Thank you!!

Yeah, I’ve been mainly working on building a roster/inventory system from the ground up for the last couple of months. Now it’s finally time to link that up with the grid units. 😃 But also, I managed to figure out most grid things I was attempting by myself (I got a Zone of Control working!); I try very hard not to bother you unnecessarily. =)

> HandleUnitSpawning will run automatically when you spawn a unit as it is part of BP\_Unit’s construction script.

Ahh okay, awesome, that clears my confusion up too!

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [December 10, 2021, 5:48pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4047 "2021-12-10T17:48:54Z")

</div>

Great to hear you’re making progress! Don’t feel bad about asking if you get stuck on anything, though. In moderate amounts I actually enjoy providing support and figuring out solutions to stuff.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_5acc7b24](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_5acc7b24](https://forums.unrealengine.com/u/anonymous_user_5acc7b24)\
**Post date:** [December 11, 2021, 10:16am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4048 "2021-12-11T10:16:00Z")

</div>

That’s a relief, thank you!

I did actually remember one other question I wanted to ask you! I did fix the problem for myself already some time ago, but I’m wondering if this is intended behaviour.

I could not get a purely self-targeting ability to work. In a fresh new project with only the toolkit and nothing else, if I try for Range = 0 and “allies/can target self” checked (on the Heal ability, but the abilities I was working on in my own project behave the same):

 ![self1](https://d3kjluh73b9h9o.cloudfront.net/original/3X/c/b/cbf19e785d44e071a053ea793f4ebc9dcf871ec2.png)

Then I don’t get any targetable tiles whatsoever and can’t select anything, not even self.

 ![self2.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/0/c/0c029b127b1a178c32c1e9aa91a5aa4124ad5b27.jpeg)

If I put the Range back to 1, but uncheck “allies” and only leave the “can target self” checkmark, I now can’t target allies OR self. Neither is selectable. And checking allies in this context is obviously not desirable, since I don’t want to allow targeting allies.

![self3.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/a/a/aa1c636095a124eb98453ed991067d233ba1d0d2.jpeg)

In my own project I managed to make the following workaround:

 ![self4](https://d3kjluh73b9h9o.cloudfront.net/original/3X/6/1/61749ac9eb80dec5c1d63caa12f694c8547852ff.png)

 ![self5](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/6/361ab0afa25ede145a8c31f83db98dd145527bd0.png)

 ![self6.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/5/35d4dbb219180b1ae0543b7163d49a4c272c4eb2.jpeg)

Which finally gets me a target-self-only ability with appropriate tile marker:

![self7.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/8/d/8d7fa389a829d24739be66e85a6d9086558a51ea.jpeg)

Is this intended behaviour? (If yes, no problem, I can just copy my workaround into the next update and such. The “Can Target Self” checkmark just threw me off.) Or was I just missing the correct option somewhere? =)  
Now I’m really out of questions, hopefully for some time, haha.

---

<div class="post-metadata">

**Author:** ![Monokkel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/monokkel/32/1194496_2.png) [@Monokkel](https://forums.unrealengine.com/u/Monokkel)\
**Post date:** [December 12, 2021, 6:06pm UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4049 "2021-12-12T18:06:09Z")

</div>

> [@anonymous\_user\_5acc7b24](#):
>
> That’s a relief, thank you!
> 
> I did actually remember one other question I wanted to ask you! I did fix the problem for myself already some time ago, but I’m wondering if this is intended behaviour.
> 
> I could not get a purely self-targeting ability to work. In a fresh new project with only the toolkit and nothing else, if I try for Range = 0 and “allies/can target self” checked (on the Heal ability, but the abilities I was working on in my own project behave the same):
> 
> ![self1](https://d3kjluh73b9h9o.cloudfront.net/original/3X/c/b/cbf19e785d44e071a053ea793f4ebc9dcf871ec2.png)
> 
> Then I don’t get any targetable tiles whatsoever and can’t select anything, not even self.
> 
> ![self2.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/0/c/0c029b127b1a178c32c1e9aa91a5aa4124ad5b27.jpeg)
> 
> If I put the Range back to 1, but uncheck “allies” and only leave the “can target self” checkmark, I now can’t target allies OR self. Neither is selectable. And checking allies in this context is obviously not desirable, since I don’t want to allow targeting allies.
> 
> ![self3.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/a/a/aa1c636095a124eb98453ed991067d233ba1d0d2.jpeg)
> 
> In my own project I managed to make the following workaround:
> 
> ![self4](https://d3kjluh73b9h9o.cloudfront.net/original/3X/6/1/61749ac9eb80dec5c1d63caa12f694c8547852ff.png)
> 
> ![self5](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/6/361ab0afa25ede145a8c31f83db98dd145527bd0.png)
> 
> ![self6.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/5/35d4dbb219180b1ae0543b7163d49a4c272c4eb2.jpeg)
> 
> Which finally gets me a target-self-only ability with appropriate tile marker:
> 
> ![self7.PNG](https://d3kjluh73b9h9o.cloudfront.net/original/3X/8/d/8d7fa389a829d24739be66e85a6d9086558a51ea.jpeg)
> 
> Is this intended behaviour? (If yes, no problem, I can just copy my workaround into the next update and such. The “Can Target Self” checkmark just threw me off.) Or was I just missing the correct option somewhere? =)  
> Now I’m really out of questions, hopefully for some time, haha.

Yeah, this seems like it is probably a bug. Thanks for posting your own workaround for this. I will add it to my buglist and investigate.

---

<div class="post-metadata">

**Author:** ![Falseking1](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Falseking1](https://forums.unrealengine.com/u/Falseking1)\
**Post date:** [January 6, 2022, 2:30am UTC](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930/4050 "2022-01-06T02:30:34Z")

</div>

hello! I’ve recently purchased this toolkit and much to my dismay, the pathfinding system, though efficient, is not much to my liking.

The pathfinding I wish to incorporate is one that has both a manual and automatic algorithm. Something that Advance wars used.

In Advance Wars, I can sort of manually draw my own path but if the path were to become longer than the unit’s move range or the next visited tile is not adjacent to the latest member of the path, it would then resort to automatic pathfinding.

As you can see in the image, the path taken is not necessarily the best path as going through the forest, instead of taking the road, would cost less fuel (which is an in-game mechanic) but the player is able to draw that path because it does not extend beyond the selected unit’s move range  
 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/f/3fcd2cae6e237280dd1173792c3ff971f51b0d58.png)

[Previous page](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930.md?page=196)

[Next page](https://forums.unrealengine.com/t/support-advanced-turn-based-tile-toolkit/21930.md?page=198)
