# Revit split face is lost exporting to twinmotion

**URL:** <https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923>\
**Category:** Getting Started & Setup\
**Tags:** twinmotion, question\
**Created:** [January 17, 2024, 6:59am UTC](https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923 "2024-01-17T06:59:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![CHAWPMASTER](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@CHAWPMASTER](https://forums.unrealengine.com/u/CHAWPMASTER)\
**Post date:** [January 17, 2024, 6:59am UTC](https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923/1 "2024-01-17T06:59:22Z")

</div>

Before I used to be able to split face a wall and apply two different paints to one wall, it appears no that twinmotion reads walls as one element and does not carry over the split face which i am then unable to use two different colors, is there a setting i am missing?

 ![discourse-forum-post-image-updload-164749290158319611153376798588648010990.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/4/d/b/4dbbb0925d18836462a8c20418fe2f664664d15f.png) ![discourse-forum-post-image-updload-10839579488744983336192778288044642699.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/0/1/201b655ad6a38a1ab494c3a61e8153b5c3be0b60.png)

---

<div class="post-metadata">

**Author:** ![sajeshansaje](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@sajeshansaje](https://forums.unrealengine.com/u/sajeshansaje)\
**Post date:** [March 22, 2025, 1:08pm UTC](https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923/2 "2025-03-22T13:08:00Z")

</div>

same issue for me aswell

---

<div class="post-metadata">

**Author:** ![BerenikaBee](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@BerenikaBee](https://forums.unrealengine.com/u/BerenikaBee)\
**Post date:** [April 30, 2025, 1:26pm UTC](https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923/3 "2025-04-30T13:26:35Z")

</div>

I had the same issue; assume it’s some form of glitch.. The only thing that has worked for me, was deleting the wall with split face in Revit, synchronise with Twinmotion to make sure it disappeared. Then redrew it in Revit altogether with split face, and resynchronise.

---

<div class="post-metadata">

**Author:** ![PioneerArchitect](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/pioneerarchitect/32/931956_2.png) [@PioneerArchitect](https://forums.unrealengine.com/u/PioneerArchitect)\
**Post date:** [May 5, 2025, 5:30pm UTC](https://forums.unrealengine.com/t/revit-split-face-is-lost-exporting-to-twinmotion/2152923/4 "2025-05-05T17:30:23Z")

</div>

We only export datasmith. If you use by material and make sure you are not sharing the same asset material. Should work fine.
