# Resizing flyers

**URL:** <https://forums.unrealengine.com/t/resizing-flyers/75583>\
**Category:** ARK: Survival Evolved\
**Tags:** unreal-engine, Ark:-Survival-Evolved, Modding\
**Created:** [October 9, 2016, 8:22am UTC](https://forums.unrealengine.com/t/resizing-flyers/75583 "2016-10-09T08:22:28Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![t0m4s99](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@t0m4s99](https://forums.unrealengine.com/u/t0m4s99)\
**Post date:** [October 9, 2016, 8:22am UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/1 "2016-10-09T08:22:28Z")

</div>

Hello! I’m struggling right now with resizing the Dragon and can’t figure for the love of me how to:

a) change the take off height and adjust the camera accordingly  
b) change the collision when flying as it gets stopped above ground, as it can’t go any lower

If anyone could give me a hand I would highly appreciate it, Thanks!

---

<div class="post-metadata">

**Author:** ![t0m4s99](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@t0m4s99](https://forums.unrealengine.com/u/t0m4s99)\
**Post date:** [October 25, 2016, 7:25pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/2 "2016-10-25T19:25:26Z")

</div>

Late Bump.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_0549f641](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_0549f641](https://forums.unrealengine.com/u/anonymous_user_0549f641)\
**Post date:** [October 26, 2016, 4:19pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/3 "2016-10-26T16:19:06Z")

</div>

> [@99tomas99;606377](#):
>
> Hello! I’m struggling right now with resizing the Dragon and can’t figure for the love of me how to:
> 
> a) change the take off height and adjust the camera accordingly  
> b) change the collision when flying as it gets stopped above ground, as it can’t go any lower
> 
> If anyone could give me a hand I would highly appreciate it, Thanks!

Are you scaling the dragon through the BP or through the mesh? You would need to scale the dragon properly through the mesh to fix the problems you listed.

---

<div class="post-metadata">

**Author:** ![t0m4s99](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@t0m4s99](https://forums.unrealengine.com/u/t0m4s99)\
**Post date:** [October 28, 2016, 5:25pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/4 "2016-10-28T17:25:44Z")

</div>

Yes i’m pretty sure i was resizing the mesh but i’ll take a look if that’s the case… Will post what i find. 😛

EDIT: yes, I was editing the mesh, but the camera was way too high and collision in the BP was wrong, so i tried to fix that and that’s where my problem comes in… maybe I’m just doing it wrong. Adjusted the Scale Multiplier in the mesh then I changed the TPVCamera Offset, TPVCamera Offset Multiplier, changed Capsule Half Height and Radius and then moved the Mesh to the center of the Capsule. Is there something I’m missing or completely messing up?

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_0549f641](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_0549f641](https://forums.unrealengine.com/u/anonymous_user_0549f641)\
**Post date:** [October 28, 2016, 9:12pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/5 "2016-10-28T21:12:15Z")

</div>

> [@99tomas99;615948](#):
>
> Yes i’m pretty sure i was resizing the mesh but i’ll take a look if that’s the case… Will post what i find. 😛
> 
> EDIT: yes, I was editing the mesh, but the camera was way too high and collision in the BP was wrong, so i tried to fix that and that’s where my problem comes in… maybe I’m just doing it wrong. Adjusted the Scale Multiplier in the mesh then I changed the TPVCamera Offset, TPVCamera Offset Multiplier, changed Capsule Half Height and Radius and then moved the Mesh to the center of the Capsule. Is there something I’m missing or completely messing up?

Check out this guide here. It helped me out a lot and I think it will solve your problems.

> **[HOWTO: Properly Retarget Animations and Anim\_BPs for Dino Resizing!](https://forums.unrealengine.com/showthread.php?82621-HOWTO-Properly-Retarget-Animations-and-Anim_BPs-for-Dino-Resizing)**
>
> 1 First off make a separate folder for each dinosaur. 1.2 Second you need to add the skeletal mesh, and skeleton of the dinosaur one by one using copy. 1.3 Next you need to rename them to make sure they are not named the same as anything else. Then...

Apparently, changing the size of a mesh requires a lot more steps than just changing the scale, but in the end it will fix the problems you’re experiencing. You may still get some initial problems with the TPV or FPV while riding the dino, but this can be easily fixed in the BP by adjusting the TPV and FPV settings.

---

<div class="post-metadata">

**Author:** ![t0m4s99](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@t0m4s99](https://forums.unrealengine.com/u/t0m4s99)\
**Post date:** [October 31, 2016, 10:44am UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/6 "2016-10-31T10:44:05Z")

</div>

Sorry for late reply, I hardly bother to start the dev kit just because of the load times… The tutorial you sent has solved the camera issue 100% thank you! However the thing about the dragon still hovering above the ground (will try to add a pic) and can’t go any lower, is there any setting or anything I can adjust to change the lowest fly height?

pic:  
 ![12e3626ad1f4a802872e298c2e55909034819a9c.jpeg](https://d1ap1mz92jnks1.cloudfront.net/images/transparent.png)  
That’s the lowest the dragon can go…

---

<div class="post-metadata">

**Author:** ![JohannG49](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@JohannG49](https://forums.unrealengine.com/u/JohannG49)\
**Post date:** [May 10, 2017, 1:28pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/7 "2017-05-10T13:28:31Z")

</div>

The take off height is in the BP of the dino in “take off additional velocity Z”

---

<div class="post-metadata">

**Author:** ![SkyeEden](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/skyeeden/32/1116094_2.png) [@SkyeEden](https://forums.unrealengine.com/u/SkyeEden)\
**Post date:** [March 9, 2022, 9:37pm UTC](https://forums.unrealengine.com/t/resizing-flyers/75583/8 "2022-03-09T21:37:01Z")

</div>


