# Problem importing apex cloth

**URL:** <https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110>\
**Category:** World Creation\
**Tags:** physx, apex-clothing, unreal-engine, question\
**Created:** [December 24, 2016, 6:29am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110 "2016-12-24T06:29:08Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [December 24, 2016, 6:29am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/1 "2016-12-24T06:29:08Z")

</div>

Hi everyone!

I’m having some weird problem importing apex cloth from maya (2016) into the engine after the switch to physx 3.4, I updated my plug-in and reskinned the cloth mesh to make sure no vertices had more than 4 influencing bones then I painted the cloth, ran the simulation and exported the cloth same as always without any errors, butthis time when I bring the cloth into UE4 the “apex details” panel doesen’t show any details and I cannot apply the cloth to the proper material.

I also exported the whole mesh again just to be sure bit still having the same issue

here’s a screenshot if the panel I mentioned

![119809-2016-12-23+22_12_22-.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/6/a/4/6a4104c4a6751c986e369cda1d39c736efcb341e.png)

the thing is I had already done this without any problem right when 1.14 came out

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [December 28, 2016, 9:41pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/2 "2016-12-28T21:41:41Z")

</div>

Hi Mordragos,

APEX Details is only a panel that shows details, but doesn’t let you edit them. Physics Properties are all of the things you can change.

To apply cloth to a material, you must go into the LOD section to change the cloth.

 ![120122-clothingsettings.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/6/7/1/671c0e3bf645e52942896f2cb227d60c5784bf4c.png)

-

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [December 28, 2016, 10:13pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/3 "2016-12-28T22:13:10Z")

</div>

Hey !  
Thanks for your response, though my problem is the cloth doesn’t seem to be importing properly, because I can’t apply it to any material in the LOD section, the thing is the engine doesn’t show any errors and neither does Maya when I validate the scene =/

 ![120123-2016-12-28+14_00_00-paladin.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/7/d/77de1c2cc948d0bf48256bf82e7dc834b31ea7d3.png)

I’m starting to think It may have something to do with the cloth mesh’s skinning and the new cloth skinning changes in 4.14 but I don’t really know.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [December 29, 2016, 8:29pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/4 "2016-12-29T20:29:44Z")

</div>

Can you do me a favor and rename your .apx file to something other than just “cloth”? I’m thinking we might have a naming exception for that.

I’m noticing that the Clothing options only ever appear after you add an APEX file, so it seems that it isn’t recognizing “cloth.apx”.

If that doesn’t work, can you migrate your content to a standalone project and send it to me? You can PM me a download link on the forums.

-

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [December 29, 2016, 11:04pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/5 "2016-12-29T23:04:11Z")

</div>

I tried changing the name but I still get the same issue, =/

I sent you the project files in a pm, thanks for taking the time to look into this!

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [December 30, 2016, 9:31pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/6 "2016-12-30T21:31:07Z")

</div>

Hey Mordragos,

I think something is probably wrong with your apx files. I took your fbx and recreated all the PhysX Cloth in Maya, then exported the mesh and apx. When I brought it into UE4, the second I added the Clothing File, the Clothing options appeared.

I would suggest recreating the clothing files and particularly making different material ID’s for each cloth (i.e. separate material IDs for the cape, kilt, etc).

Try this out to see if there is anything that you missed: [Basic Unreal Engine 4 Apex Cloth - YouTube](https://www.youtube.com/watch?v=uTOELBNBt04)

-

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [December 30, 2016, 11:18pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/7 "2016-12-30T23:18:29Z")

</div>

Thanks, I’ll try separating and remaking the cloth files.  
would you mind telling me which version of maya and the physx plug in are you using though? just to be sure I’m not using a wrong version

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [January 3, 2017, 4:36pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/8 "2017-01-03T16:36:55Z")

</div>

Hey Mordragos,

I’m in Maya 2016 Extension 1 + SP6 and the plugin is PhysX SDK Version 3.3.4 and Apex SDK Version 1.3.4(Overall plugin version is 3.4.11121.04262).

-

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [January 5, 2017, 12:23am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/9 "2017-01-05T00:23:55Z")

</div>

Hey !

thanks for the info, I think I got it fixed, after downgrading to the plug in overall version 10202.23462 then going back to 11121.04262 and telling it not to reset the settings, so I guess it was a plug in thing!

Though now I have a new issue, after importing the cloth asset some parts of the cloth seem to be flipping , kin of as if they were simulating in in different axis

withouth cloth

 ![120872-2017-01-04+16_18_58-paladin_.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/9/1/7910621437fb41364bd8db4f0dbecd9d21b2fb8c.png)

with cloth

 ![120873-2017-01-04+16_10_07-paladin_.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/4/b/74bffae6cc4fa8d3b32d7a75dca8edb806617b02.png)

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [January 9, 2017, 8:45pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/10 "2017-01-09T20:45:41Z")

</div>

Can you show me your cloth painting weights in Maya? That’s usually the issue when I see this type of thing.

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [January 9, 2017, 9:15pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/11 "2017-01-09T21:15:43Z")

</div>

Sure thing, here they are.

 ![121407-2017-01-09+13_10_58-stylizedpaladinchar+-+unreal+editor.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/3/0/7/307640bcd28b4b43ea09bd7c2699f371dec5bf42.png)

 ![121408-2017-01-09+13_11_52-stylizedpaladinchar+-+unreal+editor.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/3/6/b/36bff83a73e41fafa607219d7a289b186d2a3d95.png)

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [January 13, 2017, 4:24pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/12 "2017-01-13T16:24:20Z")

</div>

Hey Mordragos,

I’ve been experimenting more since yesterday and see a drastic difference between the cloth results in 4.13 and 4.14 with the same file (I exported the cape by itself for testing). I’ve contacted one of our engineers for some guidance on this, but I suspect it may be related to the physx 3.4 update present in 4.14.

-

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [January 13, 2017, 6:36pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/13 "2017-01-13T18:36:20Z")

</div>

Hey Mordragos,

We did some talking and I realized that I was being a little thick when searching the plugins. I got 3.3.4 thinking it was the latest on accident. You SHOULD be using the plugin you had originally(3.4), but the issue you had noticed (where the Clothing setting wouldn’t appear after importing the apx) is truly a bug. Since we are using 3.4 in UE4, files created with 3.3.4 won’t work correctly.

This was a mixup on my end and I’ve entered [UE-40614](https://issues.unrealengine.com/issue/UE-40614).

-

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [January 13, 2017, 9:32pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/14 "2017-01-13T21:32:03Z")

</div>

Great! I will upgrade to the 3.4 plug in and wait for the fix, this really takes a weight off my back.

Again, thank you for your time and looking into this whole thing!

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_280dd372](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_280dd372](https://forums.unrealengine.com/u/anonymous_user_280dd372)\
**Post date:** [January 16, 2017, 4:18pm UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/15 "2017-01-16T16:18:30Z")

</div>

Well, new developments! So the reason it wasn’t importing correctly is because the 3.4 plugin exports no simulated verts if you leave a percentage of your verts at a cloth weight of 0. We only found this out after we flooded the meshes with a value of 120 (it exported and imported successfully…looked like crap with 120 everywhere, but it worked). We then worked our way backward. I’d suggest simply flooding your mesh with a value of 0.001 before painting for the time being. We’re going to poke Nvidia about this, but it wouldn’t hurt for you to do the same.

---

<div class="post-metadata">

**Author:** ![AlsonEntuna](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AlsonEntuna](https://forums.unrealengine.com/u/AlsonEntuna)\
**Post date:** [January 23, 2017, 3:49am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/16 "2017-01-23T03:49:50Z")

</div>

I’m also having this problem because I was using 3.3.4 version of the PhysX plugin but when I upgraded it suddenly doesn’t give me any options to add apex clothing inside the engine

---

<div class="post-metadata">

**Author:** ![MGGeymonat](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/mggeymonat/32/1115483_2.png) [@MGGeymonat](https://forums.unrealengine.com/u/MGGeymonat)\
**Post date:** [January 23, 2017, 4:16am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/17 "2017-01-23T04:16:07Z")

</div>

As said the best way to fix it right now is to use the latest (3.4) apex plug in and to flood your cloth mesh with 0.001 weight before painting to ensure all your vertex are exported in the apx file (so UE4 can actually read it).

I’m currently testing it and it seem to work though I admit its quiet a hassle specially the old collision ragdoll now pushes the .001 vertices =/, hopefully nvidia will change the way the plug-in exports the apx on a future release.

---

<div class="post-metadata">

**Author:** ![AlsonEntuna](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AlsonEntuna](https://forums.unrealengine.com/u/AlsonEntuna)\
**Post date:** [January 23, 2017, 4:25am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/18 "2017-01-23T04:25:27Z")

</div>

I’m trying it right now. ☹ PhysX was working fine until the update of the new one.

---

<div class="post-metadata">

**Author:** ![AlsonEntuna](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AlsonEntuna](https://forums.unrealengine.com/u/AlsonEntuna)\
**Post date:** [January 23, 2017, 4:30am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/19 "2017-01-23T04:30:25Z")

</div>

I tried painting my skinweights with a value of 0.001 and when I exported the apex file and the mesh it did not work for me ☹

---

<div class="post-metadata">

**Author:** ![AlsonEntuna](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AlsonEntuna](https://forums.unrealengine.com/u/AlsonEntuna)\
**Post date:** [January 23, 2017, 4:33am UTC](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110/20 "2017-01-23T04:33:08Z")

</div>

It’s not working for me ☹ i tried painting it to a skin weight of 0.001 and when I exported the mesh and apex file unreal still doesn’t read it

[Next page](https://forums.unrealengine.com/t/problem-importing-apex-cloth/380110.md?page=2)
