# Parallax Occlusion Mapping on mobile

**URL:** <https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559>\
**Category:** Rendering\
**Tags:** Mobile, parallax, unreal-engine, heightmap, question\
**Created:** [December 15, 2018, 3:05pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559 "2018-12-15T15:05:16Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![stuck\_compiling](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@stuck\_compiling](https://forums.unrealengine.com/u/stuck_compiling)\
**Post date:** [December 15, 2018, 3:05pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/1 "2018-12-15T15:05:16Z")

</div>

From what I’ve been able to find, there is very little information about POM in general, but according to what I could find, POM is a supported feature on mobile. However, after switching from _Shader Model 5_ to _Default High-End Mobile_ the effect is completely gone. Do I have to toggle something somewhere, or does it work differently? Is there some other way to fake it on mobile?

---

<div class="post-metadata">

**Author:** ![stuck\_compiling](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@stuck\_compiling](https://forums.unrealengine.com/u/stuck_compiling)\
**Post date:** [December 16, 2018, 5:13pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/2 "2018-12-16T17:13:02Z")

</div>

For anyone stumbling upon this, I have found a solution. Inside the blueprint for your material, doubleclick the _POM-node_ to inspect it. There are switches for various platforms. Cut ties so that your end result looks like the _image below_ for _each output_, and save. This will make POM function in the exact same way on Default High-End Mobile (_OpenGLES 3.1, Metal and Vulkan_). It will **not** however work in _OpenGLES 2_ as POM requires _DDX_ and _DDY-nodes_ which are not supported.

 ![262530-solution.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/5/7/4/57433ae6982ef14bad1f3276f90378d88c751091.png)

---

<div class="post-metadata">

**Author:** ![mixer76](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@mixer76](https://forums.unrealengine.com/u/mixer76)\
**Post date:** [May 18, 2022, 8:44am UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/3 "2022-05-18T08:44:43Z")

</div>

Thank you! Your way works on mobile!

---

<div class="post-metadata">

**Author:** ![CarlitoMania](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@CarlitoMania](https://forums.unrealengine.com/u/CarlitoMania)\
**Post date:** [January 10, 2024, 4:11pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/4 "2024-01-10T16:11:46Z")

</div>

Hi, I’m using this solution to deploy a VR project on Oculus Quest 2.

Does anybody know how much does this effect impact performance?

---

<div class="post-metadata">

**Author:** ![BananableOffense](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@BananableOffense](https://forums.unrealengine.com/u/BananableOffense)\
**Post date:** [January 11, 2024, 8:58pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/5 "2024-01-11T20:58:50Z")

</div>

The effect has a highly variable cost depending on the number of samples, heightmap resolution, filtering method, etc. it can be fairly cheap, or extremely expensive.

---

<div class="post-metadata">

**Author:** ![RafigRzayev](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@RafigRzayev](https://forums.unrealengine.com/u/RafigRzayev)\
**Post date:** [February 5, 2025, 2:54pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/6 "2025-02-05T14:54:46Z")

</div>

Also dealing with the same thing, considering if I should use Parallax Occlusion Mapping for a VR project. I removed ties to the the ES3\_1 nodes in the Feature Switches, and it indeed made POM work in Quest 2 now. I had 72fps prior to the change, with flat textures, now it is around 40-50fps with bumpy ones. I have 10 cubes around me each using POM based material.

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/d/b/2dbefd856cfe1e505e7aaf96ae424cd853e8b193.jpeg)

Was wondering if you ended up using POM for Quest 2 or found an alternative solution? @CarlitoMania

Basically I want to reduce 3d workload, and convert 2D art (bas-relief drawings) directly to volumetric assets. Used a program called [Materialize](https://boundingboxsoftware.com/materialize/index.php) to generate heightmaps based on the image, and in UE connected the heightmap to the POM node to make it work. The automatically generated heightmap is not accurate, plus POM seems to incur big performance cost. Was curious if I should just stick with a manual low-poly 3D workflow, or look for an alternative solution. Found interesting discussion [here](https://discussions.unity.com/t/unlit-shader-with-parallax-mapping/729826/2) that mentions techniques called Parallel **Offset** Mapping (in contrast to Occlusion) and Shell texturing. @BananableOffense if you have any recommendations would be glad to hear : )

---

<div class="post-metadata">

**Author:** ![BananableOffense](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@BananableOffense](https://forums.unrealengine.com/u/BananableOffense)\
**Post date:** [February 5, 2025, 3:26pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/7 "2025-02-05T15:26:45Z")

</div>

[![](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/7/9/a79354955017632cbb86cc7519bfaefc80318c77.jpeg "Parallax Occlusion Mapping Deep Dive EP: 1 - Filtering and Mips") ](https://www.youtube.com/watch?v=iPNlRtTimkU)

My suggestion is to use low resolution height map, low quality texture filtering without anisotropic filtering, and a low number of samples which can be compensated for via dithering and TAA. All of this can significantly reduce the per frame cost of the effect.

---

<div class="post-metadata">

**Author:** ![RafigRzayev](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@RafigRzayev](https://forums.unrealengine.com/u/RafigRzayev)\
**Post date:** [February 5, 2025, 4:45pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/8 "2025-02-05T16:45:02Z")

</div>

Thank you very much! I will be doing various tests following days, will share the results.

---

<div class="post-metadata">

**Author:** ![RafigRzayev](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@RafigRzayev](https://forums.unrealengine.com/u/RafigRzayev)\
**Post date:** [February 10, 2025, 3:11pm UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/9 "2025-02-10T15:11:33Z")

</div>

@BananableOffense made many tests, and the most significant boost was just reducing the step count, from 64 to 32.

Also did the texture filtering optimization and tried various height map resolutions. Though can’t say that height map resolution gave significant effect. But as I know, the lower resolution heightmaps are better for visual purposes anyways.

I have dithering, it fixes the pancakes, but still not very fancy. Currently MSAA is used in the project, need to verify if ok to switch to TAA.

Additional optimization that I did was to make a distance based optimization, so that POM is not costly on distant objects: [https://www.youtube.com/watch?v=8hThP-Yni\_o&list=LL&index=4&t=248s](https://www.youtube.com/watch?v=8hThP-Yni_o&list=LL&index=4&t=248s)

But after everything, it seems that just need to block the view angles from level design point of view, and keep the step count around 32 rather than 64 (doesn’t have to be power of two).

We kind of decided that we are able to use POM in our project, just trying to see if we can improve it visually. Will definitely look into TAA, because in 3d party software (materialize), the POM effect is very smooth, but in UE it looks worse.

---

<div class="post-metadata">

**Author:** ![Captain\_G](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Captain\_G](https://forums.unrealengine.com/u/Captain_G)\
**Post date:** [February 24, 2026, 1:48am UTC](https://forums.unrealengine.com/t/parallax-occlusion-mapping-on-mobile/439559/10 "2026-02-24T01:48:37Z")

</div>

Not sure if this will help significantly on mobile, but it’s worth a shot. Link to “Better Parallax Mapping” on FAB: [https://www.fab.com/listings/12141519-aedc-4761-916e-8a8acd4d7cd3](https://www.fab.com/listings/12141519-aedc-4761-916e-8a8acd4d7cd3)
