# Oculus Go - ExposureCompensation (post process) not working?

**URL:** <https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276>\
**Category:** XR Development\
**Tags:** GearVR, unreal-engine, Exposure, question\
**Created:** [May 16, 2018, 8:17pm UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276 "2018-05-16T20:17:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![maxbrown](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/maxbrown/32/1194506_2.png) [@maxbrown](https://forums.unrealengine.com/u/maxbrown)\
**Post date:** [May 16, 2018, 8:17pm UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276/1 "2018-05-16T20:17:49Z")

</div>

According to this page, you should be able to control to the exposure on GearVR (GO).[https://docs.unrealengine.com/en-us/Platforms/GearVR/BestPractices](https://docs.unrealengine.com/en-us/Platforms/GearVR/BestPractices)

For a project with an interior and exterior on the GO I really would like to control the Exposure Compensation. I added two volumes but the exposure settings don’t seem to have any effect. Any suggestions?

Easily tested by creating a simple scene with two PostProcessVolumes;  
One PPV unbound - priority 0 + ExposureCompensation 0.  
And another PPV with priority 2 and ExposureCompensation 2

---

<div class="post-metadata">

**Author:** ![Norman3D](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Norman3D](https://forums.unrealengine.com/u/Norman3D)\
**Post date:** [November 11, 2018, 9:06pm UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276/2 "2018-11-11T21:06:25Z")

</div>

It should work. However it has been broken since Unreal 4.19 after it changed name from Exposure Bias to Exposure Compensation 😕

---

<div class="post-metadata">

**Author:** ![maxbrown](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/maxbrown/32/1194506_2.png) [@maxbrown](https://forums.unrealengine.com/u/maxbrown)\
**Post date:** [November 12, 2018, 6:20am UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276/3 "2018-11-12T06:20:28Z")

</div>

Actually, to get this to work mobile HDR must be enabled. If you can’t afford the fps drop that comes with mobile HDR - maybe just add some extra lights inside and delete the PPV volumes altogether.

---

<div class="post-metadata">

**Author:** ![Norman3D](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Norman3D](https://forums.unrealengine.com/u/Norman3D)\
**Post date:** [November 12, 2018, 7:24pm UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276/4 "2018-11-12T19:24:17Z")

</div>

It’s a bug. Exposure Compensation should work even with Mobile HDR turned off.  
That’s what the documentation here states:  
[https://docs.unrealengine.com/en-us/Platforms/GearVR/BestPractices](https://docs.unrealengine.com/en-us/Platforms/GearVR/BestPractices)  
And here:  
[https://static.docs.arm.com/100959/0100/arm\_guide\_for\_unreal\_engine\_4\_optimizing\_mobile\_gaming\_graphics\_100959\_0100\_00\_en.pdf](https://static.docs.arm.com/100959/0100/arm_guide_for_unreal_engine_4_optimizing_mobile_gaming_graphics_100959_0100_00_en.pdf)

And last but not least, it’s even in the MobileBasePassPixelShader.usf

```
	#if !MATERIALBLENDING_MODULATE && OUTPUT_GAMMA_SPACE
		// MobileHDR applies PreExposure in tonemapper
		OutColor.rgb *= ResolvedView.PreExposure;
	#endif

```

PreExposure is applied in the tonemapper IF and only IF MobileHDR is turned on. IF it’s NOT then it’s multiplied in the PixelShader, which is the bit of code I’ve posted above.  
The specific bug is that the Exposure Compensation is not properly going through PreExposure and seems to be constantly at 1.0.

---

<div class="post-metadata">

**Author:** ![Norman3D](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Norman3D](https://forums.unrealengine.com/u/Norman3D)\
**Post date:** [November 12, 2018, 7:43pm UTC](https://forums.unrealengine.com/t/oculus-go-exposurecompensation-post-process-not-working/425276/5 "2018-11-12T19:43:05Z")

</div>

It’s a bug, confirmed.

> **[The Unreal Engine Issues and Bug Tracker](https://issues.unrealengine.com/issue/UE-61387)**
>
> Welcome to the Unreal Engine Issue and Bug Tracker. You can check the status of an issue and search for existing bugs. See latest bug fixes too.
