# Niagara system not working until I open it and it compiles - still won't work in packaged game

**URL:** <https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132>\
**Category:** FX\
**Tags:** unreal-engine\
**Created:** [December 30, 2020, 8:10pm UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132 "2020-12-30T20:10:17Z")\
**Posts on this page:** 7\
**Page:** 2

<div class="post-metadata">

**Author:** ![Loux\_xavier](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/loux_xavier/32/1201519_2.png) [@Loux\_xavier](https://forums.unrealengine.com/u/Loux_xavier)\
**Post date:** [July 24, 2024, 7:43am UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/22 "2024-07-24T07:43:24Z")

</div>

Ok, I progressed and fixed my FX.  
On my side, it happened only with array properties on GPU emitters.

At the start, I used the User Exposed properties to set Emitter Attributes in the Emitter Update Tab.

User Exposed properties and Emitter Attributes used the same names.

- I added a “U\_” prefix to all User Exposed parameters so they don’t use the same names.
- And I added an Effect Type in the System Property: Frequency: Medium, Cull Reaction: Pause.

This fixed the bug in the editor; when I reload the asset or restart the editor, it works without me having to open it. But not in the packaged game…

- So, in the end, I removed the Emitter Attributes and used module inputs to directly pass the User Exposed properties.

I’m not sure what caused this bug exactly, but now it works for me after reload, restart, and in the packaged game.

---

<div class="post-metadata">

**Author:** ![Hukha](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Hukha](https://forums.unrealengine.com/u/Hukha)\
**Post date:** [August 15, 2024, 4:52pm UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/23 "2024-08-15T16:52:13Z")

</div>

In our case we fixed it moving the logic to use Niagara Data Channels.  
It is not a fix directly but works 🙂

---

<div class="post-metadata">

**Author:** ![psychoblizzard9](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@psychoblizzard9](https://forums.unrealengine.com/u/psychoblizzard9)\
**Post date:** [September 11, 2024, 3:56am UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/24 "2024-09-11T03:56:06Z")

</div>

This worked for me. I was also using collision on the particles. Thanks

---

<div class="post-metadata">

**Author:** ![alfmoonlove](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@alfmoonlove](https://forums.unrealengine.com/u/alfmoonlove)\
**Post date:** [January 2, 2025, 3:07pm UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/25 "2025-01-02T15:07:44Z")

</div>

So any comments from Epic Games ? This system does not work in 5.5.1. Will it be fixed at all ?

---

<div class="post-metadata">

**Author:** ![Michael.Galetzka](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/michael.galetzka/32/924122_2.png) [@Michael.Galetzka](https://forums.unrealengine.com/u/Michael.Galetzka)\
**Post date:** [January 8, 2025, 6:53pm UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/26 "2025-01-08T18:53:29Z")

</div>

Most of the time when a Niagara system doesn’t work until you open it in the editor, it is caused by unintentional attribute trimming. There can be other reasons why it won’t work correctly in a packaged game (plugin load order, uncooked dependencies, etc), but if you put it in a level and restart the editor and it won’t play until you open the asset itself then you should try to disable these settings in your system properties:

- trim attributes
- bake rapid iteration parameters

If that fixes it, you can either leave them off (only downside a a bit of a performance and memory hit), or you can try and hunt down the missing attribute and add it to the explicit include list. The attribute trimmer cuts out everything not directly referenced by a renderer, but sometimes when using things like particle attribute readers, things can slip through the cracks.

The reason why it works when you open the asset is because as longs as it’s open, it will be compiled in “editor mode”, which skips things like attribute trimming by default to allow faster iteration.

---

<div class="post-metadata">

**Author:** ![zubetto](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/zubetto/32/984287_2.png) [@zubetto](https://forums.unrealengine.com/u/zubetto)\
**Post date:** [February 1, 2026, 12:47pm UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/27 "2026-02-01T12:47:08Z")

</div>

I had a similar issue with a Niagara particle system component in UE 5.1. I solved it using the [SetNiagaraSystemAsset function](https://dev.epicgames.com/documentation/en-us/unreal-engine/BlueprintAPI/Niagara/SetNiagaraSystemAsset) (with _ResetExistingOverrideParameters = true_, which is the default).

When I set a valid Niagara system asset for a Niagara particle system component in the editor, the component did not work (or rather, it was not configured properly, since warnings of the following type were logged: _“LogNiagara: Warning: OverrideParameter"FoilDragCoeffs” DataInterface “NiagaraDataInterfaceArrayFloat4” was not found"_) in a Standalone Game or when loading one level from another with the _OpenLevel_ function, and also most likely in a packaged game (at the same time, if I started a Play In Editor (PIE) session, then that component was configured properly).  
When I saved my level with a Niagara particle system component without assigning it any Niagara system asset, and instead called the _SetNiagaraSystemAsset_ function in the _BeginPlay_ event (or in other events called during gameplay) to assign the proper Niagara system asset, then that Niagara particle system component was configured and worked properly when loading one level from another, as well as in the packaged game.

---

<div class="post-metadata">

**Author:** ![MrHardo1](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@MrHardo1](https://forums.unrealengine.com/u/MrHardo1)\
**Post date:** [June 2, 2026, 3:41am UTC](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132/28 "2026-06-02T03:41:28Z")

</div>

Nothing else worked for me in here but disabling “trim attributes” did! Thank you very much

[Previous page](https://forums.unrealengine.com/t/niagara-system-not-working-until-i-open-it-and-it-compiles-still-wont-work-in-packaged-game/224132.md?page=1)
