# Nanite Tessellation Not Working on Plane

**URL:** <https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990>\
**Category:** Rendering\
**Tags:** unreal-engine, tessellation, heightmap, Nanite\
**Created:** [May 23, 2024, 11:20pm UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990 "2024-05-23T23:20:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![SeniorCPPbutNewToUE](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@SeniorCPPbutNewToUE](https://forums.unrealengine.com/u/SeniorCPPbutNewToUE)\
**Post date:** [May 23, 2024, 11:20pm UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/1 "2024-05-23T23:20:20Z")

</div>

After downloading the “Rocky Land and Rivers” heightmap from [motionforgepictures.com](https://www.motionforgepictures.com/height-maps/) I created a simple plane mesh (2 tris) through **Modeling** , enabled **Nanite** on the mesh, created a **Material** with _Enable Tessellation_ and _Used with Nanite_ checked, and tried assigning both the PNG bump map and the EXR bump map to the plane. It did nothing.

I tried multiplying the bump map with a huge multiplier but the plane is still flat. Is there something I’m missing?

Here’s the material setup:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/e/0/a/e0a859ef4d412ed48a56d5d8e600b7dc70f4ab93.jpeg)

And the result:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/b/e/5/be590cb3406c7c2db93193d0452b4ca3e7285eaa.jpeg)

---

<div class="post-metadata">

**Author:** ![ROCKENROLLA471](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/rockenrolla471/32/1223404_2.png) [@ROCKENROLLA471](https://forums.unrealengine.com/u/ROCKENROLLA471)\
**Post date:** [May 24, 2024, 1:05am UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/2 "2024-05-24T01:05:04Z")

</div>

Hi,

As far as I’m concerned at least Displacement is showing for you.

I can’t even get it to show even with adding the nanite lines in the .ini

If you haven’t done that you should try.

There are two lines to add look it up there’s plenty of posts about it.

But still doesn’t work for me I can’t even get displacement to show.

Nanite works tho.

---

<div class="post-metadata">

**Author:** ![KaidoomDev](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/kaidoomdev/32/977996_2.png) [@KaidoomDev](https://forums.unrealengine.com/u/KaidoomDev)\
**Post date:** [May 24, 2024, 4:01am UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/3 "2024-05-24T04:01:04Z")

</div>

Plug the texture directly and play around with displacement magnitude, make sure the static mesh is nanite.

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/1/b/21b19b1e1688521aabfa71eefdbba395cd46b4ab.jpeg)

Just in case double check you have these in your default engine

```auto
r.Nanite.AllowTessellation=1
r.Nanite.Tessellation=1

```

---

<div class="post-metadata">

**Author:** ![SeniorCPPbutNewToUE](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@SeniorCPPbutNewToUE](https://forums.unrealengine.com/u/SeniorCPPbutNewToUE)\
**Post date:** [May 27, 2024, 5:27pm UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/4 "2024-05-27T17:27:30Z")

</div>

That was it! Magnitude! Though, it does not look good at all. I’m going to use the Procedural Mesh Component instead.

---

<div class="post-metadata">

**Author:** ![KaidoomDev](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/kaidoomdev/32/977996_2.png) [@KaidoomDev](https://forums.unrealengine.com/u/KaidoomDev)\
**Post date:** [May 27, 2024, 8:43pm UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/5 "2024-05-27T20:43:09Z")

</div>

Right on. Please consider marking this as answered so others can find it easily.

---

<div class="post-metadata">

**Author:** ![SeniorCPPbutNewToUE](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@SeniorCPPbutNewToUE](https://forums.unrealengine.com/u/SeniorCPPbutNewToUE)\
**Post date:** [May 29, 2024, 1:58am UTC](https://forums.unrealengine.com/t/nanite-tessellation-not-working-on-plane/1869990/6 "2024-05-29T01:58:13Z")

</div>

Sorry but I’m not sure how. I don’t see a button for marking it as the right answer.
