# Nanite requires DirectX 12 Ultimate therefore only specific graphics cards ?

**URL:** <https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140>\
**Category:** Rendering\
**Tags:** unreal-engine, question\
**Created:** [May 17, 2023, 12:37am UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140 "2023-05-17T00:37:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![chrisw](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@chrisw](https://forums.unrealengine.com/u/chrisw)\
**Post date:** [May 17, 2023, 12:37am UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/1 "2023-05-17T00:37:01Z")

</div>

I have enabled Nanite on a few meshes, and it resulted with the meshes looking very blocky, both in the mesh editor and in-game, as if they were stuck on LOD4

Following some reading, this would be expected if Nanite was not actually working in my Unreal editor, and the meshes are showing in their fallback state.

It seems that Nanite depends on DirectX 12 shader model version 6.6 which can be checked following this guide:

> **[Identifying the Shader Model of Your Graphics Card in Windows](https://www.chiefarchitect.com/support/article/KB-03146/identifying-the-shader-model-of-your-graphics-card-in-windows.html)**
>
> The shader model can be identified using a Microsoft utility called DirectX Capabilities Viewer. If the shader model is older than version 6, but the graphics card or chip is fairly new, the display driver may need to be updated.

I have installed the latest drivers, and also installed the latest Windows update today, but my shader model version is stuck on 6.5

I think that shader model 6.6 is part of DirectX 12 Ultimate that includes a feature called Mesh Shading that ‘intelligently controls level of detail selection and tessellation for objects’:

> **[NVIDIA GeForce: DX12 Ultimate](https://www.nvidia.com/en-gb/geforce/technologies/directx-12-ultimate/)**
>
> The newest version of DirectX and new gold standard for the next-generation of games.

And the only cards that support DirectX 12 Ultimate apparently are ‘Nvidia’s GeForce RTX 30 Series and GeForce RTX 20 series GPUs … AMD’s Radeon RX 6800 Series and RX 6900 XT’:

> **[What is DirectX 12 Ultimate and what does it mean for PC gamers?](https://www.pocket-lint.com/what-is-directx/)**
>
> DirectX has been knocking around for years and allows developers to create games that can make the most of the components of your gaming PC.

My card is not in that list, so I guess Nanite will not work for me ?

---

<div class="post-metadata">

**Author:** ![Doublezer0](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Doublezer0](https://forums.unrealengine.com/u/Doublezer0)\
**Post date:** [May 17, 2023, 1:37am UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/2 "2023-05-17T01:37:27Z")

</div>

Nanite works on my Nvidia GTX 1080ti so it works on earlier cards too.

---

<div class="post-metadata">

**Author:** ![chrisw](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@chrisw](https://forums.unrealengine.com/u/chrisw)\
**Post date:** [May 17, 2023, 2:10am UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/3 "2023-05-17T02:10:28Z")

</div>

I seem to have it working now, with my older card, after re-installing Windows and with the latest graphics driver and the latest Unreal editor upgrade.

I’m not sure if Nanite is fully working, as the triangles visualisation in the viewport shows a basic transition from full-geometry to about half the geometry, when at a distance.

I will try using the new tessellation feature of 5.2 and see if that works as expected, and then post my findings here…

---

<div class="post-metadata">

**Author:** ![chrisw](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@chrisw](https://forums.unrealengine.com/u/chrisw)\
**Post date:** [May 17, 2023, 4:36pm UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/4 "2023-05-17T16:36:22Z")

</div>

Yes the Nanite displacement maps are working. The trick with those is to use 0.05 as the trim relative error.

The latest Windows update 22H2 and the latest Unreal engine 5.2 are what I needed to get Nanite working.

With large meshes, Nanite doesn’t seem to reduce the mesh very much, and performance seems to be less than just using the mesh without Nanite.

Smaller meshes work reasonably well, so it saves a lot of time setting up the LODs

Maybe you need the DirectX 12 Ultimate with its Mesh Shading, to see performance gains at the hardware level.

---

<div class="post-metadata">

**Author:** ![Ozykz](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ozykz/32/1194601_2.png) [@Ozykz](https://forums.unrealengine.com/u/Ozykz)\
**Post date:** [July 15, 2023, 5:01pm UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/5 "2023-07-15T17:01:46Z")

</div>

We had tons of people with early AMD cards who didn’t have working Nanite.

> [@AMD GPU Issues - Nanite in 5.1.1](https://forums.unrealengine.com/t/amd-gpu-issues-nanite-in-5-1-1/783769):
>
> Good Morning. We shipped our project yesterday (yay). Since then we’ve recieved numerous bug reports from our users reporting using AMD GPUs that mesh faces are missing and/or flickering. The project is built in UE5.1.1. It utilizes Nanite as much as possible. Lighting is completely static, with reflection captures used. We use virtual lightmaps, and virtual texturing. Currently we have confirmed this issue to be on the following cards: RX 580 AMD Radeon Pro 555x (running bootcamp) RX Vega…

This seems to have been resolved recently with a new update.

I believe we have nanite confirmed working as far back as 900 series Nvidia. AMD seems very hit and miss. Most of our users that are experiencing crashes (not necessarily related to Nanite) are using AMD cards.

We currently aren’t using Nanite displacement so I can’t comment on that.

---

<div class="post-metadata">

**Author:** ![Probie92](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Probie92](https://forums.unrealengine.com/u/Probie92)\
**Post date:** [June 17, 2024, 9:33pm UTC](https://forums.unrealengine.com/t/nanite-requires-directx-12-ultimate-therefore-only-specific-graphics-cards/1168140/6 "2024-06-17T21:33:50Z")

</div>

Have you checked to make sure your Nividia drivers are up to date? I was having similar issues until I realised I had all my game drivers up to date but my development drivers through Nividia were about 6 months out of date.

Noticeable difference in nanite behaviour
