# Local exposure is in UE5-Main

**URL:** <https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274>\
**Category:** Rendering\
**Tags:** unreal-engine\
**Created:** [January 23, 2022, 12:06am UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274 "2022-01-23T00:06:45Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [January 23, 2022, 12:06am UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/1 "2022-01-23T00:06:45Z")

</div>

Not sure how long this actually has been in the source builds of UE5, but I just stumbled upon it today and was really surprised. Very happy to see this and I really hope it makes it into release.

Should be really helpful for scenes with a lot of dynamic range that are difficult to expose.

 ![UE5_LocalExposure](https://d3kjluh73b9h9o.cloudfront.net/original/3X/3/2/323ac13d3e284e2980568c0f6c4587d15e126c6c.jpeg)

Performance cost (for this shot) was ~0.13ms on a GTX1070

---

<div class="post-metadata">

**Author:** ![Suthriel](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/suthriel/32/1195643_2.png) [@Suthriel](https://forums.unrealengine.com/u/Suthriel)\
**Post date:** [February 20, 2022, 7:15pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/2 "2022-02-20T19:15:52Z")

</div>

Thats awesome 🙂 Finally something, thats closer to real eyes or HDRI effects. If this works from a dark place looking at a brighter place, then it also should be good for looking from bright outside places into dark rooms/caves too.

---

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [February 20, 2022, 7:23pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/3 "2022-02-20T19:23:29Z")

</div>

> [@Suthriel](#):
>
> it also should be good for looking from bright outside places into dark rooms/caves too.

It does! I can’t post a screenshot at the moment but it works even better in that situation in my opinion.

I also find it helps a lot in smoothing out the exposure transitions so that it looks more natural as the camera moves between areas.

---

<div class="post-metadata">

**Author:** ![II\_ADN\_II](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ii_adn_ii/32/1194656_2.png) [@II\_ADN\_II](https://forums.unrealengine.com/u/II_ADN_II)\
**Post date:** [May 16, 2025, 1:26pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/4 "2025-05-16T13:26:25Z")

</div>

Im writing here because seems like there are almost no LocalExposure threads and this is the main one. I havent found much documentation on the topic if any.

The implementation of local exposure is terrible and its on by default. It causes a dark halo around any high intensity are on the screen.

A simple emissive particle:

LE:

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/3/4/d/34d72f4c3db85feef45c3b91a87cff369d8ffa7f.png)

No LE:

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/1/8/a1810cfd778fbf9165ed4baad3d91b84223b553d.png)

LE + no bloom:

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/9/d/b/9dba921b163882f775d79fcc2d7c7d9dcfd972d4.png)

No LE+no bloom:

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/b/9/c/b9c6c21b5aa6f5e40f56b6adf5da13e3c71c3653.png)

LE (low highlight contrast so the artifact is clearly visible):

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/5/b/a5ba8c9bcff24de7c7be77fe81c4ba1d76d10ebf.jpeg)

The effect becomes very clear as the emissive increases:

Its clearly visible even on the image you posted:

 ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/0/9/f/09f6d2bafe4a71f4e2e1a79612542f68f810e2a0.jpeg)

Local exposure is introducing artifacts on the final image on the current implementation and only creates more problems by being on by default, messing even more the contribution of each system to the final image. On top of that its a very specific solution for very specific content, it shouldn’t be activated by default.

I doubt local exposure to be necessary when creating VFX/materials/animations/inspecting meshes. I dont want to see this when creating content as its only relevant for final image touches ideally and for lightning at most.

And no that’s not how our eyes work. Its a “solution” to ease the limited precision of the scene lightning.

More info on local exposure and very interesting read:

> **[Exposure Fusion – local tonemapping for real-time rendering](https://bartwronski.com/2022/02/28/exposure-fusion-local-tonemapping-for-real-time-rendering/)**
>
> Local tonemapping in action. HDRI texture credit: Greg Zaal, CC0. In this post I want to close the loop and come back to the topic I described ~6y ago! Local tonemapping (I’ll refer to it as LTM) &…

> **[Image dynamic range](https://bartwronski.com/2016/09/01/dynamic-range-and-evs/)**
>
> Intro This post is a second part of my mini-series about dynamic range in games. In this part I would like to talk a bit about dynamic range, contrast/gamma and viewing conditions. You can find the…

> **[Localized tonemapping – is global exposure and global tonemapping operator...](https://bartwronski.com/2016/08/29/localized-tonemapping/)**
>
> In this blog post, I wanted to address something that I was thinking about for many years – since starting working on rendering in video games and with HDR workflows and having experience with vari…

---

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [May 16, 2025, 1:52pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/5 "2025-05-16T13:52:17Z")

</div>

> [@II\_ADN\_II](#):
>
> I doubt local exposure to be necessary when creating VFX/materials/animations/inspecting meshes. I dont want to see this when creating content as its only relevant for final image touches ideally and for lightning at most.

Then turn it off? Motion blur, TSR and auto-exposure are also both on by default and everybody constantly complains about them too.

Unreal has many dubious default settings. The defaults for auto-exposure’s histogram min is set way too high and pretty much guarantees the AE target will fall off of the bottom end in any remotely dark scene, meanwhile motion blur targets 30 FPS by default.

The default settings suck, that’s software for you.

---

<div class="post-metadata">

**Author:** ![Miguel1900](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/miguel1900/32/1010694_2.png) [@Miguel1900](https://forums.unrealengine.com/u/Miguel1900)\
**Post date:** [May 16, 2025, 2:00pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/6 "2025-05-16T14:00:51Z")

</div>

Look like an ‘anti-bloom’ effect/mask.

---

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [May 16, 2025, 2:13pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/7 "2025-05-16T14:13:14Z")

</div>

Local exposure is exposing different regions of the screen at different levels, you need to decide how it will transition between them and by default it uses a wide blur. This is fixable by simply using more conservative contrast settings and/or by adjusting the blur blend/kernel weights.

Additionally my screenshots were taken when Local Exposure was first implemented and had very few controls, it has changed a lot since then.

Also I feel like it should be obvious but if you use it without bloom, you’re going to have a bad time. The bloom is necessary to maintain some idea of what parts are “bright” when the overall contrast is reduced, without it the output doesn’t make any sense visually.

---

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [May 16, 2025, 5:50pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/8 "2025-05-16T17:50:18Z")

</div>

> [@II\_ADN\_II](#):
>
> Its clearly visible even on the image you posted:
> 
> ![imagen](https://d3kjluh73b9h9o.cloudfront.net/original/4X/0/9/f/09f6d2bafe4a71f4e2e1a79612542f68f810e2a0.jpeg)

Here’s an updated comparison in 5.5.4:

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/1/7/c/17c38151fca5e26bfeebf2aa493089abd29aad7e.jpeg)

---

<div class="post-metadata">

**Author:** ![II\_ADN\_II](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ii_adn_ii/32/1194656_2.png) [@II\_ADN\_II](https://forums.unrealengine.com/u/II_ADN_II)\
**Post date:** [May 20, 2025, 12:16pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/9 "2025-05-20T12:16:47Z")

</div>

To turn something off you need to know what to turn off. I dont see the reasoning behind an animatior/material artist having to know how Local Exposure works and what it is.

Yeah thats the point, maybe they shouldnt activate every feature by default. I dont see photoshop or visual studio having terrible default settings, dont know why unreal sould have a free pass on this matter.

> [@Arkiras](#):
>
> Also I feel like it should be obvious but if you use it without bloom, you’re going to have a bad time. The bloom is necessary to maintain some idea of what parts are “bright” when the overall contrast is reduced, without it the output doesn’t make any sense visually.

No, they are two separate things. LE has nothing to do with bloom and it can and should be used even without bloom. Is a exposure adjustment, if any it can affect the threshold of bloom intensity values, but it shouldn’t break bloom.

---

<div class="post-metadata">

**Author:** ![Arkiras](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/arkiras/32/1008648_2.png) [@Arkiras](https://forums.unrealengine.com/u/Arkiras)\
**Post date:** [May 20, 2025, 2:05pm UTC](https://forums.unrealengine.com/t/local-exposure-is-in-ue5-main/274274/10 "2025-05-20T14:05:05Z")

</div>

> [@II\_ADN\_II](#):
>
> it can and should be used even without bloom

Good luck with that
