# Interchange USD Importer - Primvars 

**URL:** <https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135>\
**Category:** Pipeline & Plugins\
**Tags:** unreal-engine, Epic-Pro-Support, question\
**Created:** [August 13, 2026, 12:58pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135 "2026-08-13T12:58:22Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 13, 2026, 12:58pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/1 "2026-08-13T12:58:22Z")

</div>

Hello,

I would like to ask you, currently, what primvars does the Interchange USD Importer recognize.

We have a number of assets that use primvars to drive certain color corrects inside the MTLX Material.

The MTLX Material gets converted to Substrate fine, but the primvars on the mesh and the primvar reader nodes do not exist after import.

Do you have any plans to support custom primvars, and if not, what primvars are supported that we can use?

Thanks.

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 13, 2026, 12:58pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/2 "2026-08-13T12:58:25Z")

</div>

**Steps to Reproduce**  
Hello,

With all the relevant Interchange USD Plugins active, attempt to import any USD That has non-standard primvars; primvars that are created for driving certain parameters inside their materials. They will not pass and in the MTLX Material that gets created, the primvar reader nodes are not recreated.

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 14, 2026, 3:04pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/3 "2026-08-14T15:04:45Z")

</div>

Hi,

After further testing I have created a very simple USD that you can use to debug.

It contains a grid with uvs and a primvar per primitive, called R, a color3f signature, that is then used in the MTLX to drive the base color.

I am importing using the Interchange, with the primvar menu set to either \*Bake\* or \*All\*, both options give the same issue - the created texture for this primvar is a 2x2 texture with the color values of 1 - 1 - 1, therefore incorrect.

Please take a look at it and let me know.

Thank you.

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [August 18, 2026, 9:31pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/4 "2026-08-18T21:31:50Z")

</div>

Hi, Vladimir

Thank you for the example file!

The short answer is that UE meshes don’t directly support named primvars like USD meshes, therefore materials don’t support named primvar lookups in the way that MaterialX geomprop nodes do.

However, the Interchange USD importer does support baking primvars to textures, and the importer will also take care of substituting the geomprop nodes in the MaterialX shader with the required texture lookups in the UE material.

To enable this feature, make sure the “Import Primvars” USD Assets pipeline option is set to “Bake”.

The resulting import should create a texture and material that matches the primvar.

One caveat however; when attempting this with your file I did discover a bug/oversight unfortunately which is that _**color3f[]**_ primvars are not detected right now. As a workaround, changing the typename of _ **primvars:R** _ to _**float3[]**_ was sufficient to get the importer to bake the primvar correctly. I’ll file an internal ticket to get support for color3f[] primvars added.

Let me know if that works on your side or if you have any more issues.

Thanks,

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 19, 2026, 7:47am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/5 "2026-08-19T07:47:51Z")

</div>

Hi,

Thanks for your quick response Antony!

Of course, we know that all primvars should become textures for Unreal to be able to work with them. We were doing this pre-import to Unreal, where in Houdini we would create a texture for each primvar, but it was cumbersome to do it pre-import. It’s great to know that Unreal can do it itself.

Regarding what you’ve let us know, vector3 is also not supported.

We’ve changed the typename of the primvar to vector3f, then correctly set the mtlxgeompropvalue signature, then made an mtlx convert from vector3f to color so it works with the shader’s basecolor.

The map generated is still not working. Same 2x2 white map. Might I suggest that you take a look at all typenames possible please?

In regards to float3, can you share an example USDA? The MTLX Geom Prop Value has no float3 input, so that will cause a mismatch between the primvar and the node, causing the material not to load, as far as I know.

Thank you,

Vladimir

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 19, 2026, 8:47am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/6 "2026-08-19T08:47:06Z")

</div>

We basically use in our workflow the following primvar types:

ints

floats

floats3

vector2f

vector3f

vector4f

color3f

just to let you know, hopefully, those all would work in the future.

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [August 19, 2026, 2:25pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/7 "2026-08-19T14:25:23Z")

</div>

Hi Vladimir, the reason you’re seeing the same problem with vector3f is because it is also not supported right now unfortunately.

Current support is for int[], bool[], float[], float2[], float3[], float4[].

I plan to add the following types: vector3f[], normal3f[], point3f[], color3f[], color4f[].

Regarding the primvar change from color3f[] to float3[], the validation steps I took used Houdini/Solaris Karma CPU/XPU. For me the change did not break the geomprop node, which was still using the “Color” signature. I suspect that the underlying machinery cares more about the element size matching than it does the role. That said, as you pointed out, other implementations might not be as tolerant (Karma is the only renderer I have to test with on my side). Also, the color signature could in theory cause changes in color space handling, but I didn’t see any visual change in Karma.

For some reason I’m unable to attach any files to this ticket right now:/ The change I made to your usda was just:

_**color3f[] primvars:R**_ -\> _**float3[] primvars:R**_

Let me know if this still isn’t workable for you and we can look into other options.

Thanks,

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 24, 2026, 7:08am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/8 "2026-08-24T07:08:53Z")

</div>

Hi Antony,

I apologize for the delay, I was out of office.

Thanks for getting back to me, do you also plan to add vector4f[] ? It will help us for complex assets.

In regards to the new changes you plan to do, do you have any timeline please?

In regards to float3[], I just did a small test and I still can’t get it to work it Unreal, it still creates that 2x2 white map.

Can you check the attached file please?

Thanks!

Vladimir

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [August 28, 2026, 9:47pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/9 "2026-08-28T21:47:26Z")

</div>

Hi Vladimir,

Re vector4f[] - on the USD side there isn’t an official vector4f[] typename, only float4[]. MaterialX geomprop appears to support vector4 as a type though, and so I tested that along with a USD float4[] primvar - the primvar baking created the expected four channel texture correctly (with the alpha channel of the texture matching the fourth ‘w’ component of the vector).

I don’t have an exact timeline right now but I can look into getting this into a 5.8.x fix release. The code change is also very simple if you happen to have your own stream?

The file you attached works for me (created the correct primvar texture). Can you let me know what version and platform you’re using?

Thanks!

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [August 31, 2026, 10:12am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/10 "2026-08-31T10:12:09Z")

</div>

Hi,

We have a separate stream, so I can ask a colleague to implement it, if needed, until you get it pushed to 5.8; let me know how I would do that.

Thanks for letting me know about vector4.

The file doesn’t work for me strangely enough.

I am on Windows 10, UE 5.8.0.

Thanks.

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [September 1, 2026, 12:34am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/11 "2026-09-01T00:34:28Z")

</div>

Hi Vladimir,

I’ve managed to repro the problem you’re seeing with the file on Windows 10 and UE 5.8.0. I’ll keep digging and let you know when I’ve figured out what’s causing this.

Thanks for your patience!

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [September 1, 2026, 7:37am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/12 "2026-09-01T07:37:38Z")

</div>

Hi Antony,

Cheers, great to know!

let me know if I can help you with anything else.

After this issue is solved, or scheduled to be solved, I’d like to discuss with you about a few more USD Issues that we’re still seeing with MaterialX and lights.

Thanks

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [September 1, 2026, 3:23pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/13 "2026-09-01T15:23:40Z")

</div>

Hi Vladimir,

Ok, with a couple of import setting tweaks I was able to get the primvar baking working with 5.8:

1. It turns out there’s a bug in 5.8.x whereby the primvar baking feature breaks when the Interchange _ **Bake Meshes** _ setting is enabled (_Default USD Assets Pipeline -\> Common Meshes_). Please try disabling that and importing the file. Note that the bake meshes setting is for **asset** imports only. Import into Level disables this option automatically (btw you’ll need to set the cvar _Interchange.FeatureFlags.Import.USD.ToLevel_ to true in order to utilize Interchange for USD level impots, the default is to use the legacy USD importer).
2. In the USD Translator Settings, make sure that the _ **Material Purpose** _ setting is set to _ **full** _ and not _preview_ or _allPurpose_. This is needed in order to detect the MaterialX material instead of the default “display color” material. Note that the translator settings are hidden away a little and can be tricky to find - to open the settings UI, click the small three vertical dots in the top right of the Import Content UI.

Let me know if that imports the baked texture correctly, and if disabling bake meshes (aka freeze transforms) is a viable option for you.

For the MaterialX and lights issue it might be worth opening a new topic so that we track it separately.

Thanks,

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [September 2, 2026, 7:22am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/14 "2026-09-02T07:22:58Z")

</div>

Hi,

Thanks for letting me know.

Regarding the new topic, I will need to dive a bit deeper into the potential issue before I can do that; when I am ready, I will.

1.

Thanks for letting me know, I went ahead to the Default USD Assets Pipeline and unticked the Bake Meshes tickbox, on the right, saved it, and the asset still has the bug you discovered; that didn’t fix it.

When importing it into the Level, the primvars do work fine, that’s great 🙂 (Floats for now)

It would be ideal if you could prepare a fix the Bake Meshes, as we want to be able to freeze transforms. For now, it might work alright, but in the future it would be ideal to have this fixed.

2.

Yes, that is fine, I figured that out before luckily, but watch out as it can not always be true. The USD must be authored that way.

For example, if I don’t set the purpose of that material to \*full\* when authoring it, then I will never be able to get that MTLX into Unreal.

At the same time, if, for some reason, I want to have a full MTLX Material and a Preview MTLX Material, I have to import the preview to get the Preview MTLX Material.

All I am saying is that it really depends on the USD, but most of the time, it should be full.

I have not been able to figure out what the allPurpose is supposed to look for though.

Thanks!

Vladimir

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [September 16, 2026, 9:07pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/15 "2026-09-16T21:07:13Z")

</div>

Hi Vladimir, I just wanted to update here and let you know that we’re hoping to get the additional primvar types and bake meshes fixes into the upcoming 5.8.4 release. I’ll update here once that’s confirmed.

Thanks

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [September 17, 2026, 8:16am UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/16 "2026-09-17T08:16:11Z")

</div>

Hey,

Thanks for letting me know.

Vladimir

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![Ant\_Carysforth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Ant\_Carysforth](https://forums.unrealengine.com/u/Ant_Carysforth)\
**Post date:** [October 16, 2026, 3:06pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/17 "2026-10-16T15:06:16Z")

</div>

Hi Vladimir,

Quick update - the fixes discussed in this thread will be available in the upcoming 5.8.4 release.

Thanks

Antony

[Attachment Removed]

---

<div class="post-metadata">

**Author:** ![anonymous-edc](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous-edc](https://forums.unrealengine.com/u/anonymous-edc)\
**Post date:** [October 16, 2026, 3:33pm UTC](https://forums.unrealengine.com/t/interchange-usd-importer-primvars/2856135/18 "2026-10-16T15:33:48Z")

</div>

Hi,

Thank you!

Vladimir

[Attachment Removed]
