# I have a Sketchup model with an imported geolocated area, which has both a 2D and a 3D layer. I have the 2D layer untagged in Sketchup, I only need it very occasionally to check some things; but i...

**URL:** <https://forums.unrealengine.com/t/i-have-a-sketchup-model-with-an-imported-geolocated-area-which-has-both-a-2d-and-a-3d-layer-i-have-the-2d-layer-untagged-in-sketchup-i-only-need-it-very-occasionally-to-check-some-things-but-i/2152400>\
**Category:** Asset Creation\
**Tags:** twinmotion, question\
**Created:** [October 10, 2024, 9:17pm UTC](https://forums.unrealengine.com/t/i-have-a-sketchup-model-with-an-imported-geolocated-area-which-has-both-a-2d-and-a-3d-layer-i-have-the-2d-layer-untagged-in-sketchup-i-only-need-it-very-occasionally-to-check-some-things-but-i/2152400 "2024-10-10T21:17:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nathank9000](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@nathank9000](https://forums.unrealengine.com/u/nathank9000)\
**Post date:** [October 10, 2024, 9:17pm UTC](https://forums.unrealengine.com/t/i-have-a-sketchup-model-with-an-imported-geolocated-area-which-has-both-a-2d-and-a-3d-layer-i-have-the-2d-layer-untagged-in-sketchup-i-only-need-it-very-occasionally-to-check-some-things-but-i/2152400/1 "2024-10-10T21:17:40Z")

</div>

I have a Sketchup model with an imported geolocated area, which has both a 2D and a 3D layer. I have the 2D layer untagged in Sketchup, I only need it very occasionally to check some things; but in TM, it shows up after every refresh. Which then blocks t I have a Sketchup model with an imported geolocated area, which has both a 2D and a 3D layer. I have the 2D layer untagged in Sketchup, I only need it very occasionally to check some things; but in TM, it shows up after every refresh. Which then blocks the sun and causes chaos. I have to scroll around and find it & hide it manually every time. Is there a way to permanently designate a layer / object to be “hidden regardless of reloads”? Or some way to set it up in Sketchup that will have the same effect? Terrain modeling: 1. If I close the project, make some changes to the Sketchup model, and open the project later, the changes in the Sketchup need to be reloaded - but this destroys the custom landscape I created before. Is there any way to preserve the landscape? (By “custom landscape”, I’m referring to the Library -\> Vegetation -\> Landscape terrain, which can be raised/lowered to accommodate the house elevation changes.) 2. I have geolocated content in the Sketchup model - is there any way to automatically fit the Twinmotion Landscape to this 3D content? It’s a very complicated hillside development, modeling it by hand is very time-intensive. Or convert a 3D object INTO editable landscape? 3. 4. Basically, I have the proper SHAPE of terrain, with TERRIBLE resolution, and I have the NICE graphics of the Twinmotion landscape feature, with the wrong SHAPE. 5. 6. Is there a way to sharply raise/drop Landscape terrain on a vertical line? Let’s say I have a retaining wall, it’s a 10-foot drop across an 8” depth. The Twinmotion terrain sculpting tool pulls the terrain in a relatively smooth fashion, creating either extra terrain inside a clean 90-degree angle, or if I move it further out, there’s a gap behind the wall. 7. Is there any way to change the scale of the Landscape sculpting tool to BELOW 1 meter, for fine detail work? Or change the drawing scale, etc? 8. Is there any way to boundary the terrain changes with a shape or object, i.e. if you want to cut out a precise shape into the ground? Or just set up “masked areas” where the ground would not move? People models: 1. Is it possible to edit the animated models of people that are included in Twinmotion? I need people with a very specific ethnic dress, and there’s nothing similar; I’m fine with the body shape, facial features, and animation, I just need to give the guy a different hat or something. 2. Conversely, is it possible to import animated models into Twinmotion? If so, how? Miscellaneous: Is it possible to disable the Path Tracer “R” and “T” keys? I hit them accidentally, and everything slows to a crawl. Any answers to any of these would be appreciated!
