# How to get the Item Index for ApplyExternalStrain?

**URL:** <https://forums.unrealengine.com/t/how-to-get-the-item-index-for-applyexternalstrain/2856948>\
**Category:** Blueprint\
**Tags:** index, unreal-engine, Destructible-Mesh, Physics, question\
**Created:** [November 17, 2026, 7:00am UTC](https://forums.unrealengine.com/t/how-to-get-the-item-index-for-applyexternalstrain/2856948 "2026-11-17T07:00:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![AgentMic0604](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AgentMic0604](https://forums.unrealengine.com/u/AgentMic0604)\
**Post date:** [November 17, 2026, 7:00am UTC](https://forums.unrealengine.com/t/how-to-get-the-item-index-for-applyexternalstrain/2856948/1 "2026-11-17T07:00:29Z")

</div>

I want to obtain the ItemIndex for use with ApplyExternalStrain from a line trace, but neither Hit Item, Element Index, nor Face Index return the correct value. They all return strange values, such as 0, -1, or -2147…

Where do I get this value from? Surely there must be a way to retrieve the value that needs to be used. Furthermore, It is inherently nonsensical to require an “Item Index” when the position and range have already been specified.

---

<div class="post-metadata">

**Author:** ![BRS\_GerDAngelo](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/brs_gerdangelo/32/1009628_2.png) [@BRS\_GerDAngelo](https://forums.unrealengine.com/u/BRS_GerDAngelo)\
**Post date:** [November 17, 2026, 4:24pm UTC](https://forums.unrealengine.com/t/how-to-get-the-item-index-for-applyexternalstrain/2856948/2 "2026-11-17T16:24:51Z")

</div>

Hi @AgentMic0604

Before jumping into specific setups, Could you share a couple of quick details so I make sure I’m pointing you in the right direction?

- Which **Unreal Engine version** are you working in?

- Are you running a **Line Trace By Channel** against a **Geometry Collection Component** directly or is it hitting a custom collision/parent Actor first?

**Chaos Destruction** in UE5, “ApplyExternalStrain” actually takes the **Hit Item** directly from the **Break Hit Result** node, as long as the trace actually hits the **Geometry Collection Component** itself and **Trace Complex** is checked on your trace node.  
When “Hit Item” returns “-1 or -2147…” it usually means one of two things:

1. **Simple vs. Complex Collision**  
If **Trace Complex** is unchecked, the trace might be colliding with the outer bounding volume or a simplified hull rather than resolving the individual fractured cluster/bone index.

2. **Hitting the Wrong Component**  
If your Geometry Collection is nested inside a Blueprint with a capsule or box collider, “Hit Component” might be grabbing that wrapper instead of the **Geometry Collection Component** which will always give you “-1” for **Hit Item**.

Here is how you could wire it up to test and verify what’s going on:

1. From your **Line Trace By Channel** (or **Sphere Trace** ) enable **Trace Complex** on the node

2. Drag off **Out Hit** and add a **Break Hit Result** node.

3. Cast or check **Hit Component** to make sure it’s actually the **Geometry Collection Component** (printing **Hit Component** → **Get Display Name** is a great quick sanity check)

4. Plug **Hit Item** straight into the **Item Index** pin on **Apply External Strain** (called on that **Geometry Collection Component** ) and **Location** into **Position**.

**Note** : If you don’t need to target a specific broken part but just to cause radial damage then many times you would skip using ApplyExternalStrain and use a Master Field (FS\_MasterField) instead.  
This causes radial damage and allows linear velocity to be applied much cleaner. You don’t have to worry about the bone/item index when using this.

**Epic Documentation:** [Chaos Destruction](https://dev.epicgames.com/documentation/unreal-engine/chaos-destruction-in-unreal-engine) · [Apply External Strain](https://dev.epicgames.com/documentation/unreal-engine/BlueprintAPI/Field/ApplyExternalStrain?application_version=5.0)

Let me know what **Hit Component** prints out for you and which engine version you’re on and we can narrow it down from there!
