# How to Enable Wind on Hair Groom?

**URL:** <https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379>\
**Category:** Character & Animation\
**Tags:** unreal-engine, question\
**Created:** [June 3, 2025, 5:36pm UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379 "2025-06-03T17:36:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![stevetalkowski](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/stevetalkowski/32/776721_2.png) [@stevetalkowski](https://forums.unrealengine.com/u/stevetalkowski)\
**Post date:** [June 3, 2025, 5:36pm UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/1 "2025-06-03T17:36:56Z")

</div>

I’m sure there must be a simple answer to this, but honestly, simply cannot find a working solution scouring online. I have hair grooms imported from Blender. Niagara simulation is enabled. Now, how do I actually get wind to effect the groom curves? Please see short youTube video describing my issue. Ideally, I just would like this to be real-time for some turntable renders. Thx! [https://youtu.be/eJcyh6XjUrY](https://youtu.be/eJcyh6XjUrY)

---

<div class="post-metadata">

**Author:** ![brs-sebascova](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/brs-sebascova/32/1052483_2.png) [@brs-sebascova](https://forums.unrealengine.com/u/brs-sebascova)\
**Post date:** [June 3, 2025, 6:33pm UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/2 "2025-06-03T18:33:38Z")

</div>

Hello there @stevetalkowski!

Considering you have grooms curves and Niagara already in place, it’s most likely a matter of linking them together. To run a quick check:

1. Make sure Hair Simulation is enabled, in your Groom Actor \> Details, enable Simulation, then assign a Niagara Hair Physics Asset

2. Your scene should have Niagara wind actor, WindDirectionalSource, with your choice of values for strength, speed, and gust

3. Finally, check your groom aset, confirm it’s using a Niagara system, then open it, and ensure it has a Wind Force module assigned

---

<div class="post-metadata">

**Author:** ![stevetalkowski](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/stevetalkowski/32/776721_2.png) [@stevetalkowski](https://forums.unrealengine.com/u/stevetalkowski)\
**Post date:** [June 5, 2025, 12:36am UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/3 "2025-06-05T00:36:56Z")

</div>

@brs-sebascova Thx for the quick reply! Ok, a few questions and clarifications…

I created an Actor Blueprint which is comprised of the Static Mesh Component of my character’s full geometry, and ten Groom Components parented to the Static Mesh.

I am unclear on how to generate a Niagara Hair Physics Asset. Does this require that each of the ten Groom Component’s need to have a Binding created first? Once I figure this out, i will have Step 1 fully completed.

Step 2. I do have the WindDirectionalSource added to the scene.

Step 3. Would this be in the Physics tab? I see “Niagara Solver \> Groom Springs” and Custom System (grayed out) with StableSpringsSystem active. I am unable to open this to check for Wind Force module.

I hope this all makes sense - i feel like i’m just missing a few crucial steps. Creating the Niagara Hair Physics Asset, assigning it properly, then verifying the Wind Force module is assigned.

---

<div class="post-metadata">

**Author:** ![blix47](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@blix47](https://forums.unrealengine.com/u/blix47)\
**Post date:** [September 11, 2025, 9:34am UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/4 "2025-09-11T09:34:39Z")

</div>

Hi, for me the Wind Force added in the Niagara emiter gives a compile error with a transient FirstFrame variable which I figured I could set a default value for in the blueprint. Now it compiles but still the wind is not running.  
I even tried the alternate method with a force vector that is controlled with a curve over LoopedAge instead of the Wind Force, that works but there is no vorticity/variation in the effect and all hair is moving as a whole.

---

<div class="post-metadata">

**Author:** ![Sternyang](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Sternyang](https://forums.unrealengine.com/u/Sternyang)\
**Post date:** [October 27, 2025, 11:53am UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/5 "2025-10-27T11:53:55Z")

</div>

I have the same concern as the OP, can someone answer?

---

<div class="post-metadata">

**Author:** ![SLODI\_A](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@SLODI\_A](https://forums.unrealengine.com/u/SLODI_A)\
**Post date:** [October 29, 2026, 6:36pm UTC](https://forums.unrealengine.com/t/how-to-enable-wind-on-hair-groom/2539379/6 "2026-10-29T18:36:12Z")

</div>

So, I recently figured out it for myself. You need to create niagara wind and edit collission for your character, I done it with my metahuman and everything worked. But one concern about hair collision through head i have: I increased collision radius and enable project bend/ stretch in my groom asset.

1. Create niagara system wind ( this tutorial works for UE5) [https://youtu.be/fakJzWIZKx4?si=Ud6CnL0oeL7yI0zr](https://youtu.be/fakJzWIZKx4?si=Ud6CnL0oeL7yI0zr)
2. You probably would have collision problems, so this helps you  
[Xgen Custom Groom Collisions with Metahuman Body - #5 by UEDev](https://forums.unrealengine.com/t/xgen-custom-groom-collisions-with-metahuman-body/1227185/5)

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/e/f/a/efaf19e7cbbf2ec2011b4d39e3e70ebdc3962e74.png)

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/d/f/9/df9c3a306a04b5198ac22c103cf97bd7b6ad53cd.png)

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/1/c/2/1c2f4526df8b607d62a285a9dba22038864a7800.png)

 ![image](https://d3kjluh73b9h9o.cloudfront.net/original/4X/3/9/7/397f4f0d8b9326f0082288bc2dedeaeda5eac912.png)
