# Gamma Studio - Dirty Steps 

**URL:** <https://forums.unrealengine.com/t/gamma-studio-dirty-steps/2856880>\
**Category:** Product Discussion\
**Tags:** fab\
**Created:** [November 16, 2026, 9:17pm UTC](https://forums.unrealengine.com/t/gamma-studio-dirty-steps/2856880 "2026-11-16T21:17:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![GammaStudio](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@GammaStudio](https://forums.unrealengine.com/u/GammaStudio)\
**Post date:** [November 16, 2026, 9:17pm UTC](https://forums.unrealengine.com/t/gamma-studio-dirty-steps/2856880/1 "2026-11-16T21:17:13Z")

</div>

[Demo](https://drive.google.com/file/d/1sBbERIbLPeCp0UKeVsfh9bg9h9kXFhIE/view?usp=sharing)  
  
[WetFootprints\_Documentation](https://drive.google.com/file/d/1WyB1KmyHuV6djL-F1HHi1HrPfNg0zjhc/view?usp=sharing)  
  
  
Characters leave fading footprints after walking through water, blood, mud, oil or paint, and get wet or dirty up to the height they waded in. One component, no animation edits.

Wet Footprints is a drop-in footprint and wetness system for Unreal Engine 5.8, built 100% in Blueprints.

Walk through a puddle and the soles soak it up. Every step after that leaves a print that gets weaker as the foot runs dry, and the prints themselves dry and fade over time. Wade into a deep pool and the character gets wet or coated up to the height they went in. Water dries off by itself, mud dries lighter and cracks, and walking into water washes the mud off again - gradually and unevenly, like the real thing.

Setup takes a minute: add the BPC\_WetFootprints component to your character, drop a BP\_LiquidPool in the level, pick a liquid and press Play. No animation edits are needed - the component watches the foot bones and finds them on its own.

KEY FEATURES

- Five liquids included: water, blood, mud, oil and paint

- Per-foot soaking: the trail fades step by step as the sole runs dry

- Prints dry and fade with a drying time and lifetime per liquid

- Puddles and deep pools you can wade into, ellipse or rectangle

- Wet and dirty bodies up to the height reached, with soft, blotchy edges

- Water dries off, mud dries and cracks, water washes mud off gradually

- Soaked bodies drip for a while

- Any floor or landscape layer can count as a liquid through physical materials

- Boot, sneaker, barefoot and paw soles

- Automatic foot detection for the UE mannequin, Mixamo, 3ds Max Biped, Rigify and other common rigs

- Anim notify and distance modes for custom setups or characters without a skeleton

- Events and helpers: On Footprint, On Feet Soaked, Soak Feet, Soak Body, Clean Actor and more

- Demo map with every liquid, two deep pools and a mud field

EASY TO USE

- Add one component to any character

- Drop a liquid pool and pick a liquid

- New liquid: duplicate a data asset and change its colors and times

- No project settings, no collision channels, no plugins: works in any 5.8+ project

COMPATIBILITY

- Unreal Engine 5.8

- Windows

- Blueprint only, no C++, no third-party plugins

- Multiplayer friendly: purely cosmetic, runs on every client with no network traffic

INCLUDED

- The complete project with the demo map

- PDF documentation (also as text) to link from the listing

The character shown in the trailer is not included. The demo uses the Unreal Engine mannequin.

The trailer music is an original track made for this product.

Made by Gamma Studio.

> **[Dirty Steps](https://www.fab.com/listings/8978f478-0d6e-42a1-9402-5a00de2d1b79)**
>
> DemoWetFootprints\_DocumentationCharacters leave fading footprints after walking through water, blood, mud, oil or paint, and get wet or dirty up to the height they waded in. One component, no animation edits.Wet Footprints is a drop-in footprint and...
