# Form not appearing in Twinmotion from Revit

**URL:** <https://forums.unrealengine.com/t/form-not-appearing-in-twinmotion-from-revit/1898243>\
**Category:** Asset Creation\
**Tags:** twinmotion, Rendering, question\
**Created:** [June 10, 2024, 11:28pm UTC](https://forums.unrealengine.com/t/form-not-appearing-in-twinmotion-from-revit/1898243 "2024-06-10T23:28:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Helishan1](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Helishan1](https://forums.unrealengine.com/u/Helishan1)\
**Post date:** [June 10, 2024, 11:28pm UTC](https://forums.unrealengine.com/t/form-not-appearing-in-twinmotion-from-revit/1898243/1 "2024-06-10T23:28:04Z")

</div>

Hi Guys

I have a two part issue.

I have Revit 2025 and Twinmotion 2024.1.

I have noticed when importing my model into Twinmotion via the direct link, for some reason my staircase in the building i am designing does not appear. It appears on the other levels but not on the groundfloor, even though the staircases are exactly the same. The railing does appear but the staircase does not, does anyone have any advice on how i may remedy this?

Secondly, for materials, i have imported the model keeping the hierarchy, however it does not allow me to change specific materials in the model. for example, should i change a wall finish for a room, it will change the material for all the walls in the entire model. According to YouTube this was supposed to be remedied when importing by keeping hierachy but its not seeming to work.

Any advice would be extremely helpful.

Thank you

---

<div class="post-metadata">

**Author:** ![DeathRay18](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@DeathRay18](https://forums.unrealengine.com/u/DeathRay18)\
**Post date:** [October 22, 2025, 5:38pm UTC](https://forums.unrealengine.com/t/form-not-appearing-in-twinmotion-from-revit/1898243/2 "2025-10-22T17:38:19Z")

</div>

I have found that the direct link never works well with railings, sweeps, reveals, etc. Best practice is to never use Direct Link, its still broken after all of these years.
