# Floating editor windows restore at incorrect positions on mixed-DPI multi-monitor setups

**URL:** <https://forums.unrealengine.com/t/floating-editor-windows-restore-at-incorrect-positions-on-mixed-dpi-multi-monitor-setups/2738521>\
**Category:** Issues and Bug Reporting (Unreal Engine)\
**Tags:** unreal-engine\
**Created:** [July 26, 2026, 9:34pm UTC](https://forums.unrealengine.com/t/floating-editor-windows-restore-at-incorrect-positions-on-mixed-dpi-multi-monitor-setups/2738521 "2026-07-26T21:34:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![genrikh22](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@genrikh22](https://forums.unrealengine.com/u/genrikh22)\
**Post date:** [July 26, 2026, 9:34pm UTC](https://forums.unrealengine.com/t/floating-editor-windows-restore-at-incorrect-positions-on-mixed-dpi-multi-monitor-setups/2738521/1 "2026-07-26T21:34:27Z")

</div>

### Summary

On a Windows 11 with three monitors using different display scaling values, floating Unreal Editor windows are restored at incorrect positions.

The issue occurs when the primary center monitor uses 200% scaling and the side monitors use 150% scaling. A floating window placed on the monitor located to the right of the primary monitor reopens with a large offset to the right.

### What Type of Bug are you experiencing?

Editor

### Steps to Reproduce

Configure three monitors in Windows:  
Center monitor: 3840×2160, landscape, 200% scaling, primary display.  
Left monitor: 2560×1440, portrait, 150% scaling.  
Right monitor: 2560×1440, portrait, 150% scaling.

Open Window → Content Browser → Content Browser 2.  
Undock Content Browser 2 so that it becomes a floating window.  
Move the floating window to the monitor located to the right of the primary monitor.  
Close Content Browser 2 and open it again.

The issue can also be reproduced by leaving the window open, closing Unreal Editor, and launching the editor again.

### Expected Result

The floating Content Browser window should reopen at the same position and size where it was previously closed or saved.

### Observed Result

The floating window reopens with a large horizontal offset to the right.  
Depending on the saved position, the window may:  
-appear partially outside the right monitor;  
-appear completely outside the visible desktop area;  
-reopen on the primary monitor instead of the right monitor.

The error accumulates from the global horizontal position of the monitor, so windows located farther to the right receive a larger offset.

### Affects Versions

5.8  
5.7

### Platform(s)

Windows

### Upload an image

 ![Screenshot_4.png](https://d3kjluh73b9h9o.cloudfront.net/original/4X/c/6/4/c64a269408d422dccf5167cea7804c34f39ba553.png)

### Additional Notes

The issue disappears when all monitors use the same scaling.  
Placing the side monitor above the primary monitor avoids the problem.

The active window position is stored in:  
%LOCALAPPDATA%\UnrealEngine\Editor\EditorLayout.json  
In the tested configuration, Unreal saves the floating window position on the right-side monitor as approximately “WindowPosition\_X”: 2564. On the next editor launch, this value appears to be restored using the primary monitor’s 200% DPI scale instead of the target monitor’s 150% DPI scale. Applying the DPI ratio manually restores the window to the correct position: 2564 × 150% / 200% = 1923, so changing the saved value to “WindowPosition\_X”: 1923 places the window correctly. Loading a custom layout containing this compensated value also restores the correct position. However, when Unreal Editor closes, it writes the uncompensated value back to EditorLayout.json. Setting the corrected EditorLayout.json file to read-only makes the window restore correctly on subsequent launches.

---

<div class="post-metadata">

**Author:** ![ShadowBr0kerz](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/shadowbr0kerz/32/1201558_2.png) [@ShadowBr0kerz](https://forums.unrealengine.com/u/ShadowBr0kerz)\
**Post date:** [September 5, 2026, 1:20pm UTC](https://forums.unrealengine.com/t/floating-editor-windows-restore-at-incorrect-positions-on-mixed-dpi-multi-monitor-setups/2738521/2 "2026-09-05T13:20:28Z")

</div>

this mixed-DPI offset is the same family as the runtime cursor offset bug — center 200% vs sides 150% means stored logical pos restores wrong.

for runtime windows the fix is per-monitor DPI correction (GetMonitorDPIScale / GetDPICorrectedCursorPosition) instead of using primary DPI. editor windows store logical pos too so they hit it on restore. your repro (3840x2160 200% center, 2560x1440 150% sides) is perfect for testing — check DisplayRect vs NativeWidth ratio per monitor. the runtime BP plugin i mentioned exposes those helpers — [Multi-Monitor Display Controller | Fab](https://www.fab.com/listings/8cc2b168-3642-4e24-9aa8-750c0bc49771) — editor side you’d need to patch the restore path similarly.
