# External Timecode into UE 

**URL:** <https://forums.unrealengine.com/t/external-timecode-into-ue/2843451>\
**Category:** Cinematics & Media\
**Tags:** unreal-engine, question\
**Created:** [October 21, 2026, 7:25pm UTC](https://forums.unrealengine.com/t/external-timecode-into-ue/2843451 "2026-10-21T19:25:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tom-Hall](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Tom-Hall](https://forums.unrealengine.com/u/Tom-Hall)\
**Post date:** [October 21, 2026, 7:25pm UTC](https://forums.unrealengine.com/t/external-timecode-into-ue/2843451/1 "2026-10-21T19:25:53Z")

</div>

Hello  
I’m really new to UE and I’m having a problem with getting UE to accept timecode.

I’m using a C300 MKIII which has SDI TC output.  
The signal path is:

C300 Freerun Timcode- SDI to Blackmagic Ultrastudio 3G - Thunderbolt to Laptop - Media Bundle

The FPS and format settings are matching and timecode display has the green icon to signal that it’s ‘seeing it’ but the camera’s TC is not matching the UE TC.

Am I missing something?  
Do I need Genlock too?

We have a BMD Sync Generator and Atem mini at work if those are useful.

Any help would be greatly appreciated!

Tom

---

<div class="post-metadata">

**Author:** ![ChenDong](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@ChenDong](https://forums.unrealengine.com/u/ChenDong)\
**Post date:** [October 23, 2026, 10:50am UTC](https://forums.unrealengine.com/t/external-timecode-into-ue/2843451/2 "2026-10-23T10:50:22Z")

</div>

The green icon only means a timecode source is locked. The number on screen is the engine timecode, and that stays on the default provider (system clock, or generated from start) until you actually assign one. That split is the usual reason the icon is green while the camera value never shows up.

For a C300 freerun embedded in SDI, into an UltraStudio 3G, into a Media Bundle:

1. Project Settings, Engine, General Settings, Timecode. Set Timecode Provider to the Blackmagic provider, not System Time, and select the UltraStudio. Apply the Media Profile as well. The bundle can see the signal while the engine provider is still the default. If the device list was empty the first time, apply once and restart the editor so the Thunderbolt device is enumerated.

2. Point that provider at the embedded/VITC timecode on the SDI input the camera is plugged into, not an LTC input you have not connected. A provider aimed at the wrong input can still go green off the signal format and never track the camera.

3. Match frame rate and drop frame to the C300. 29.97 drop-frame against 30 or 29.97 non-drop will count different numbers even when both are running. An offset that grows is a rate mismatch. An offset that stays fixed is just freerun starting at time of day while UE started at 0 or at the machine clock.

4. Genlock is not required to make the numbers match. Timecode is the clock value, genlock is frame phase. You want the sync generator when you record and need them to stay on the same frame over a long take: reference into the camera and into the UltraStudio. Without it, the numbers can match at the start and slip a frame later. The Atem only helps if it is in the SDI path and set to pass embedded timecode through, not regenerate it.

To confirm which value you are looking at, change the camera start (re-jam or power-cycle freerun) and see if the UE number jumps with the LCD. If it does not, UE is not using that provider yet.
