# Error combining image data and scan Trimble X7

**URL:** <https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513>\
**Category:** Feedback & Requests\
**Tags:** question, realityscan\
**Created:** [May 18, 2024, 6:48am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513 "2024-05-18T06:48:50Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![QuachDiKa](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@QuachDiKa](https://forums.unrealengine.com/u/QuachDiKa)\
**Post date:** [May 18, 2024, 6:48am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/1 "2024-05-18T06:48:50Z")

</div>

![screenshot_1716011313](https://d3kjluh73b9h9o.cloudfront.net/original/4X/7/a/f/7afed5be6629189704174df3996910e3d783bca4.jpeg)

Dear brother,  
I have an error when merging Trimble X7 Scan data and UAV Photos.  
The surface creates joints and gaps as shown in the image above.  
There is an error of about 4cm between the two surfaces created from Trimble X7 and UAV Phantom4RTK.  
What is the likely reason for the above error? Look forward to the help.  
The data I am using is at the link: [Erro-TrimbleX7-Phantom4RTK - Google Drive](https://drive.google.com/drive/folders/1gBjnbBmQ5mpdPO2IQ777KhJHzSNT4OA_?usp=sharing)  
Best regards

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [May 20, 2024, 7:20am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/2 "2024-05-20T07:20:14Z")

</div>

Hello @QuachDiKa,  
this is the result of wrongly aligned data.  
Are you using georeferenced data? Have you used control points to merge the data? If so, how many and how were they spread?

---

<div class="post-metadata">

**Author:** ![QuachDiKa](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@QuachDiKa](https://forums.unrealengine.com/u/QuachDiKa)\
**Post date:** [May 21, 2024, 8:21am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/3 "2024-05-21T08:21:35Z")

</div>

Can I refer to any videos about the process you mentioned?  
Since I’m new to this issue, I don’t understand the process clearly.  
Thank you very much

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [May 21, 2024, 8:34am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/4 "2024-05-21T08:34:55Z")

</div>

You can check these tutorials: [https://www.youtube.com/@CapturingReality/search?query=laser](https://www.youtube.com/@CapturingReality/search?query=laser)  
The videos are older, but principles are still the same.

---

<div class="post-metadata">

**Author:** ![QuachDiKa](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@QuachDiKa](https://forums.unrealengine.com/u/QuachDiKa)\
**Post date:** [May 21, 2024, 9:49am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/5 "2024-05-21T09:49:31Z")

</div>

thank you very much,  
I will learn more.

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [May 21, 2024, 10:17am UTC](https://forums.unrealengine.com/t/error-combining-image-data-and-scan-trimble-x7/1861513/6 "2024-05-21T10:17:13Z")

</div>

In cases like this could be helpful this: [How to give more priority to laser scans in reconstrution](https://forums.unrealengine.com/t/how-to-give-more-priority-to-laser-scans-in-reconstrution/1388350)  
You can try different settings there.
