# Can´t make VR Teleport work

**URL:** <https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703>\
**Category:** Community & Industry Discussion\
**Tags:** teleport, unreal-engine, template, question\
**Created:** [December 19, 2016, 3:05pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703 "2016-12-19T15:05:14Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![anonymous\_user\_774015d21](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_774015d21](https://forums.unrealengine.com/u/anonymous_user_774015d21)\
**Post date:** [December 19, 2016, 3:05pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/1 "2016-12-19T15:05:14Z")

</div>

Dear community,

I have created a level with the VR-template. I am using HTC vive.The HMD works and the Motion Controllers working too. The only Problem is: I cant use the Motion Controller Buttons to teleport to a Location. When I create an empty project with VR-Template and go to play in VR mode I am able to use the MotionControllers and the “teleporting” feature works very well. But after importing a own made level into the VR-template, I am not able to use the MotionController-Buttons to teleport in my own level. I would be very happy if someone could help me out.

---

<div class="post-metadata">

**Author:** ![Natcracker](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Natcracker](https://forums.unrealengine.com/u/Natcracker)\
**Post date:** [December 19, 2016, 4:02pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/2 "2016-12-19T16:02:28Z")

</div>

I’m almost certain, but not entirely, that the teleporter uses navmesh… Try adding a “Navmesh Bounds Volume”.

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_774015d21](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_774015d21](https://forums.unrealengine.com/u/anonymous_user_774015d21)\
**Post date:** [December 20, 2016, 11:58am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/3 "2016-12-20T11:58:19Z")

</div>

Adding a NavMeshBoundsVolume doesn´t solve the problem.  
I have downloaded the PolyPixel Freebie Pack. Then I started a new Project with the build in VR-template. I closed the saved project and added the PolyPixel Freebie Pack into the “new Project”.  
Now if I open the VR-template map called Motion Controller the teleporting feature works very well.  
But if I open the PolyPixel Freebie Pack and add a Motion Controller Pawn and a NavMeshBoundsVolume it doesn´t work.  
I tried to set the world settings → Game Mode Override to None , still the same problem.  
I have tried to copy the blueprints from the VirtualRealityBP–\>Blueprints content browser folder into Freebie\_01–\>Blueprints content brwser folder.  
Then I opened the Freebie\_01–\>Maps–\>Demonstration map and added a Motion Controller Pawn and I can´t teleport.

My questions are: Does the content browser structure affects the blueprints? Does somebody have a good tutorial?  
I already gone trough the Unreal documentation “Motion Controllers tutorail”, but I can´t make it work. Can someone send me some tutorial links facing this Problem, please?

---

<div class="post-metadata">

**Author:** ![anonymous\_user\_139db513](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@anonymous\_user\_139db513](https://forums.unrealengine.com/u/anonymous_user_139db513)\
**Post date:** [December 30, 2016, 4:29pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/4 "2016-12-30T16:29:26Z")

</div>

This worked for me, but as a note that wasn’t as obvious to me as it probably should have been, make sure the navmesh volume OVERLAPS the areas you want it to map and doesn’t just butt up to them.

---

<div class="post-metadata">

**Author:** ![illniss](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@illniss](https://forums.unrealengine.com/u/illniss)\
**Post date:** [January 11, 2017, 6:13pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/5 "2017-01-11T18:13:12Z")

</div>

in case the problem still exists:

after adding the navmesh bound you`ll need atleast one “Nav Modifier Volume” at one side of your map inside of the bounds volume.  
A simpel “wall” or “floor” should do the trick, it did for me atleast.

Without wanting to sound like an complete ■■■ but deconstructing the VR template map until it stops working could give you a pointer waht you need in the map to make it work, than go from there

hope that helps

---

<div class="post-metadata">

**Author:** ![AnimaTosh](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@AnimaTosh](https://forums.unrealengine.com/u/AnimaTosh)\
**Post date:** [September 24, 2018, 9:25am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/6 "2018-09-24T09:25:17Z")

</div>

If you open the motioncontrollerpawn in the editor, you will notice the “compile” button. If you see a yellow exclamation mark, that means there are errors in the compiling process. Normally, this is due to the “input” in “project settings” not having the motion controller buttons assigned properly. That is, the buttons that enable you to teleport must match the input setup in the project settings.

---

<div class="post-metadata">

**Author:** ![pratik\_tarale](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@pratik\_tarale](https://forums.unrealengine.com/u/pratik_tarale)\
**Post date:** [December 28, 2018, 3:58am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/7 "2018-12-28T03:58:33Z")

</div>

I am facing the same problem in spite adding the navmeshvolume , still not able to teleport (am using Oculus), is this issue solved?, can anyone please help me out!  
Thank You in advance

---

<div class="post-metadata">

**Author:** ![An\_bis](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@An\_bis](https://forums.unrealengine.com/u/An_bis)\
**Post date:** [September 1, 2022, 6:47am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/8 "2022-09-01T06:47:31Z")

</div>

anyone find a solution ?

---

<div class="post-metadata">

**Author:** ![R1chWorth](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@R1chWorth](https://forums.unrealengine.com/u/R1chWorth)\
**Post date:** [September 28, 2022, 1:19am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/9 "2022-09-28T01:19:38Z")

</div>

Im struggling as well, just added the nav mesh bound and modifier but even when I show the volume Im not getting anysort of colour to tell me it working. if anyone can point men in the right direction that would be great, Im using uneal engine 5

---

<div class="post-metadata">

**Author:** ![TomKun20181](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@TomKun20181](https://forums.unrealengine.com/u/TomKun20181)\
**Post date:** [December 23, 2022, 5:02am UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/10 "2022-12-23T05:02:27Z")

</div>

I found it! Guys if you are trying to test it in a brand new level, try deleting the floor and add a new one. (anything works, scale up a cube). It works perfectly for me now.

Make sure you:

1. Finished setup VR pawn
2. Added a navmesh volume that is overlapping the surfaces

---

<div class="post-metadata">

**Author:** ![YQ100000YQ](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@YQ100000YQ](https://forums.unrealengine.com/u/YQ100000YQ)\
**Post date:** [February 9, 2023, 4:22pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/11 "2023-02-09T16:22:18Z")

</div>

it work!thank you sooooo much!!

---

<div class="post-metadata">

**Author:** ![Rajx1996](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Rajx1996](https://forums.unrealengine.com/u/Rajx1996)\
**Post date:** [December 5, 2024, 2:37pm UTC](https://forums.unrealengine.com/t/can-t-make-vr-teleport-work/379703/12 "2024-12-05T14:37:43Z")

</div>

TomKun20181\_ yes bro it can work in brand new level but not teleporting in my own project \_i have set all the setting that needs. ill be so glad n thankful if somebody want to help me
