# Artefacts in mesh creation when combining laserscan with photogrammetry

**URL:** <https://forums.unrealengine.com/t/artefacts-in-mesh-creation-when-combining-laserscan-with-photogrammetry/2633395>\
**Category:** Asset Creation\
**Tags:** realityscan\
**Created:** [August 7, 2025, 1:03pm UTC](https://forums.unrealengine.com/t/artefacts-in-mesh-creation-when-combining-laserscan-with-photogrammetry/2633395 "2025-08-07T13:03:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fototechnik](https://d3kjluh73b9h9o.cloudfront.net/original/4X/2/8/5/28502927f1d97ba1051b3b47ccfe17233bf41ef0.png) [@Fototechnik](https://forums.unrealengine.com/u/Fototechnik)\
**Post date:** [August 7, 2025, 1:03pm UTC](https://forums.unrealengine.com/t/artefacts-in-mesh-creation-when-combining-laserscan-with-photogrammetry/2633395/1 "2025-08-07T13:03:03Z")

</div>

Hi there,  
we have again an issue when combining laserscan data with photogrammetry.  
We are using Z+F Laserscanning data and images taken with a Nikon D810.  
When creating the mesh only with laserscans, the mesh looks fine.  
But when adding the images and using them for meshing as well, we have very strange artefacts.  
The alignment looks good though, we added multiple control points.  
Where do these differences come from and is there a setting that we can change?

 ![Sofa_Scan](https://d3kjluh73b9h9o.cloudfront.net/original/4X/6/c/7/6c71c2fb32bd6aed2cc9ee5091f6ff847ba67fa6.jpeg)  
 ![Sofa_Scan+Foto](https://d3kjluh73b9h9o.cloudfront.net/original/4X/b/c/2/bc23ce9b4e6d2aebda79983a00a7bbd14e7d3c72.jpeg)  
 ![Wand_Scan](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/0/e/a0eb772eb28338e47a84b0244c81dc624731da92.jpeg)  
 ![Wand_Scan+Foto](https://d3kjluh73b9h9o.cloudfront.net/original/4X/a/7/1/a71ea90f5bd1a2d0f8ea1733865b3f9eea839307.jpeg)

---

<div class="post-metadata">

**Author:** ![OndrejTrhan](https://d1ap1mz92jnks1.cloudfront.net/user_avatar/forums.unrealengine.com/ondrejtrhan/32/906565_2.png) [@OndrejTrhan](https://forums.unrealengine.com/u/OndrejTrhan)\
**Post date:** [August 7, 2025, 1:25pm UTC](https://forums.unrealengine.com/t/artefacts-in-mesh-creation-when-combining-laserscan-with-photogrammetry/2633395/2 "2025-08-07T13:25:59Z")

</div>

Hello @Fototechnik  
This is the result of a misalignment. You mentioned, that you used control points. How are they placed and on how many images and LSPs?  
In cases like this you can try to use also this setting: [How to give more priority to laser scans in reconstrution - #2 by OndrejTrhan](https://forums.unrealengine.com/t/how-to-give-more-priority-to-laser-scans-in-reconstrution/1388350/2)  
But each scanner can use the value differently, so you’ll need to provide some tests to get the best result for you.
