[Plugin] Myo

[getnamo]

Hey I installed the plugin as mentioned but the editor crashes every time I want to compile a BP which uses the Myo component. Do you have any suggestions?

Thanks for wrapping this!

Unfortunately I'm getting crashes that seem pretty inconsistent.
But more importantly, here is the data I'm getting from EventOnOrientationData: Current value =(Pitch=-90.0, Yaw=-1.#IND00,Roll=1.#QNAN0)
Event OnAccellerometerData seems to be working fine

Any ideas?

Thanks very much for your help!

Looks like something has broken recently in the plugin, I'll have a look and see if I can't reproduce these crashes/erroneous data. Let me know what version of UE and MyoConnect you are using, it will help with the debug.

[SchmaR]

UE 4.8.0
Myo Connect 0.14.0

Unfortuneally the editor crashes in the most cases without any additional informations. The last crash, which appeared right now, has some crash inforamtions.

http://pastebin.com/RzrPvxRq

It happens always when I try to compile a BP with MyoComponent attached. But after the crash the BP is compiled and can be used by "play in editor"
It happens also in the most cases when I am moving Instances of the BP in editor.
On rare occasions the Editor crashes when opening the MyoComponent containing BP.

I hope this will help you to debug. Let me know if I can provide any further information.

[SchmaR]

Hey there how are you going?
Is there anything I could provide you to help fixing this bug?

[Exxassens]

With UE4.8.1 and myo connect 0.14, I have the same problem ! When i compile my blueprint, editor crash. It also crashes when I try to load a level if a pawn with myo component is present or instanciated.

[getnamo]

UE 4.8.0
Myo Connect 0.14.0

Unfortuneally the editor crashes in the most cases without any additional informations. The last crash, which appeared right now, has some crash inforamtions.

http://pastebin.com/RzrPvxRq

It happens always when I try to compile a BP with MyoComponent attached. But after the crash the BP is compiled and can be used by "play in editor"
It happens also in the most cases when I am moving Instances of the BP in editor.
On rare occasions the Editor crashes when opening the MyoComponent containing BP.

I hope this will help you to debug. Let me know if I can provide any further information.

Thanks for this, I suspect this has something to do with how the Myo is being instantiated, which is why it crashes when you hit play or compile (it would re-make the myo component attached to your blueprint in preview). Still trying to find the time to debug this issue. Just letting you both know its still on my radar. If you're good with C++ have a look at https://github.com/getnamo/myo-ue4/b...FMyoPlugin.cpp to see if I'm doing anything funky that would cause this bug.

[kzoink]

Myo plugin crash fix

The current version of the Myo plugin (0.7.11) is still crashing the UE4 editor when Myo Connect is not running.

I've traced this crash to an assert in a function being called after plugin startup.

The actual error is:

"Assertion failed: O != NULL [File:C:\Users\<user>\Desktop\<project>\Plugins\MyoPlugin\Intermediate\Build\Win64\UE4Editor\Inc\MyoPlugin\MyoPlugin.generated."

UE4Editor_Core!FDebug::AssertFailed() [d:\buildfarm\buildmachine_++depot+ue4-releases+4.8\engine\source\runtime\core\private\misc\outputdevice.cpp:355]
UE4Editor_MyoPlugin!IMyoInterface::Execute_DeviceDisabled() [c:\users\<user>\desktop\<project>\plugins\myoplugin\intermediate\build\win64\ue4editor\inc\myoplugin\myoplugin.generated.cpp:196]
UE4Editor_MyoPlugin!FMyoPlugin::SetDelegate() [c:\users\<user>\desktop\<project>\plugins\myoplugin\source\myoplugin\private\fmyoplugin.cpp:814]
UE4Editor_MyoPlugin!MyoDelegate::MyoStartup() [c:\users\<user>\desktop\<project>\plugins\myoplugin\source\myoplugin\private\myodelegate.cpp:206]

Here's what's happening...

In MyoPlugin.generated.cpp:

    
void IMyoInterface::Execute_DeviceDisabled(UObject* O){
        check(O != NULL); // This is where the assert is failing.
...

In FMyoPlugin.cpp:809:

void FMyoPlugin::SetDelegate(MyoDelegate* newDelegate){ 
    collector->myoDelegate = newDelegate;
    collector->Startup();


    //Emit disabled event if we didn't manage to create the hub
    if (!collector->Enabled){
        collector->myoDelegate->MyoDisabled(); // Here is where IMyoInterface::Execute_DeviceDisabled is ultimately getting called.
...

The reason this assert is failing is that the pointer to the interface delegate (_interfaceDelegate) is null after startup/initialization of the plugin when Myo Connect is not running.

In MyoDelegateBlueprint.cpp:211

void MyoDelegateBlueprint::SetInterfaceDelegate(UObject* newDelegate)
{
    UE_LOG(LogClass, Log, TEXT("InterfaceDelegate passed: %s"), *newDelegate->GetName());


    //Use this format to support both blueprint and C++ form
    if (newDelegate->GetClass()->ImplementsInterface(UMyoInterface::StaticClass()))
    {
        _interfaceDelegate = newDelegate;
    }
    else
    {
        //Try casting as self
        if (ValidSelfPointer->GetClass()->ImplementsInterface(UMyoInterface::StaticClass()))
        {
            _interfaceDelegate = (UObject*)this;
        }
        else
        {
            //If you're crashing its probably because of this setting causing an assert failure
            _interfaceDelegate = NULL;
        }

There is a function which can be used to check for this condition called MyoDelegateBlueprint::IsValidDelegate().


In MyoDelegateBlueprint.cpp:187

bool MyoDelegateBlueprint::IsValidDelegate()
{
    return (_interfaceDelegate != NULL);
}

So, IsValidDelegate() can be used to detect this condition and fix the crash.

Update to 0.7.9
-Added a work around that fixes the UE editor crash if you do not have Myo Connect running when you begin play. This will allow for safe integration of myo with multiple other plugins.

Let me know if you still have crashes after this fix. This also means that if you do not see your plugin working you can confirm its because of Myo Connect failure by checking your logs

e.g.


Simply relaunching myo connect and restarting your game will make it initialize correctly. Note that you can have the myo connect running but no hub connected in which case you will also not have myo control, but you should be able to hot plug the hub in that instance.

[Cupit]

I use this plugin in 4.8 ,just by blueprint .It runs ok in editor But can not run after package . Crashed !Anyone can help me ?
Fatal error!



myo64.dll {0x000007fecac41ae0} + 0 bytes
myoPluginTest.exe!DataCollector::Startup() {0x0000000141fef41e} + 138 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!FMyoPlugin::SetDelegate() {0x0000000141feef9a} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegate::MyoStartup() {0x0000000141ff707d} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegateBlueprint::MyoStartup() {0x0000000141ff8222} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!AWorldSettings::NotifyBeginPlay() {0x000000013fd027fd} + 0 bytes
myoPluginTest.exe!AGameMode::HandleMatchHasStarted() {0x000000013fe68032} + 0 bytes
myoPluginTest.exe!AGameMode::SetMatchState() {0x000000013fe83be0} + 0 bytes
myoPluginTest.exe!UWorld::BeginPlay() {0x000000013fcdc0ce} + 0 bytes
myoPluginTest.exe!UEngine::LoadMap() {0x000000013fbe70a8} + 0 bytes
myoPluginTest.exe!UEngine::Browse() {0x000000013fb8cd6e} + 0 bytes
myoPluginTest.exe!UGameInstance::StartGameInstance() {0x000000013fe87683} + 0 bytes
myoPluginTest.exe!UGameEngine::Init() {0x000000013fe69b0b} + 0 bytes
myoPluginTest.exe!FEngineLoop::Init() {0x000000013f280b15} + 0 bytes
myoPluginTest.exe!GuardedMain() {0x000000013f27fed8} + 0 bytes
myoPluginTest.exe!GuardedMainWrapper() {0x000000013f28020a} + 0 bytes
myoPluginTest.exe!WinMain() {0x000000013f2930e9} + 0 bytes
myoPluginTest.exe!__tmainCRTStartup() {0x0000000142300c95} + 21 bytes [f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c:618]
kernel32.dll {0x00000000774b59cd} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes

[getnamo]

The current version of the Myo plugin (0.7.11) is still crashing the UE4 editor when Myo Connect is not running.

I've traced this crash to an assert in a function being called after plugin startup.

The actual error is:

"Assertion failed: O != NULL [File:C:\Users\<user>\Desktop\<project>\Plugins\MyoPlugin\Intermediate\Build\Win64\UE4Editor\Inc\MyoPlugin\MyoPlugin.generated."

UE4Editor_Core!FDebug::AssertFailed() [d:\buildfarm\buildmachine_++depot+ue4-releases+4.8\engine\source\runtime\core\private\misc\outputdevice.cpp:355]
UE4Editor_MyoPlugin!IMyoInterface::Execute_DeviceDisabled() [c:\users\<user>\desktop\<project>\plugins\myoplugin\intermediate\build\win64\ue4editor\inc\myoplugin\myoplugin.generated.cpp:196]
UE4Editor_MyoPlugin!FMyoPlugin::SetDelegate() [c:\users\<user>\desktop\<project>\plugins\myoplugin\source\myoplugin\private\fmyoplugin.cpp:814]
UE4Editor_MyoPlugin!MyoDelegate::MyoStartup() [c:\users\<user>\desktop\<project>\plugins\myoplugin\source\myoplugin\private\myodelegate.cpp:206]

Here's what's happening...

You are my hero, it seems there were cases where you could have Null set as the interface delegate and it would emit MyoDisabled all other cases are guarded by valid Myo Id. This means your recommended fix only needed to be applied to that one event.

void MyoDelegateBlueprint::MyoDisabled()
{
	if (IsValidDelegate())
		IMyoInterface::Execute_DeviceDisabled(_interfaceDelegate);
}

Thanks a lot for finding this! Gotta say that I'm also happy I commented my code earlier...

I use this plugin in 4.8 ,just by blueprint .It runs ok in editor But can not run after package . Crashed !Anyone can help me ?
Fatal error!

This may be the same error see if the latest (0.7.12) didn't fix that for you and that you've followed the packaging instructions found on github. If there is still a problem, post or pm me your logs from the crash found under saved/logs.


Update to 0.7.12
-Should no longer crash in the cases where Myo Disabled is emitted but no
delegate is set.

[Cupit]

thanks lot it runs OK now!!!!!

[Tryso]

Hello Getnamo,
Thanks for the awesome work, got a little issue with the plugin though: I am running 4.8.2 and the latest version of Myo Connect and firmware.
I got an that error either when I try to add a MyoComponent to a BP or play while having an interface implemented in one of my Blueprint:

Unhandled exception at 0x00007FFC1D551AE0 (myo64.dll) in UE4Editor.exe: 0xC0000005: Access violation reading location 0xFFFFFFFFFFFFFFFF.

About the call statck the error is getting triggered in FMyoPluggin.cpp line 514 : hub = new myo::Hub("com.example.unrealengine4");
Then : Hub_impl.hpp line 26 : switch (libmyo_error_kind(_error)) {

The error is not occurring if I turn off MyoConnect.

[kzoink]

I use this plugin in 4.8 ,just by blueprint .It runs ok in editor But can not run after package . Crashed !Anyone can help me ?
Fatal error!



myo64.dll {0x000007fecac41ae0} + 0 bytes
myoPluginTest.exe!DataCollector::Startup() {0x0000000141fef41e} + 138 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!FMyoPlugin::SetDelegate() {0x0000000141feef9a} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegate::MyoStartup() {0x0000000141ff707d} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegateBlueprint::MyoStartup() {0x0000000141ff8222} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!AWorldSettings::NotifyBeginPlay() {0x000000013fd027fd} + 0 bytes
myoPluginTest.exe!AGameMode::HandleMatchHasStarted() {0x000000013fe68032} + 0 bytes
myoPluginTest.exe!AGameMode::SetMatchState() {0x000000013fe83be0} + 0 bytes
myoPluginTest.exe!UWorld::BeginPlay() {0x000000013fcdc0ce} + 0 bytes
myoPluginTest.exe!UEngine::LoadMap() {0x000000013fbe70a8} + 0 bytes
myoPluginTest.exe!UEngine::Browse() {0x000000013fb8cd6e} + 0 bytes
myoPluginTest.exe!UGameInstance::StartGameInstance() {0x000000013fe87683} + 0 bytes
myoPluginTest.exe!UGameEngine::Init() {0x000000013fe69b0b} + 0 bytes
myoPluginTest.exe!FEngineLoop::Init() {0x000000013f280b15} + 0 bytes
myoPluginTest.exe!GuardedMain() {0x000000013f27fed8} + 0 bytes
myoPluginTest.exe!GuardedMainWrapper() {0x000000013f28020a} + 0 bytes
myoPluginTest.exe!WinMain() {0x000000013f2930e9} + 0 bytes
myoPluginTest.exe!__tmainCRTStartup() {0x0000000142300c95} + 21 bytes [f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c:618]
kernel32.dll {0x00000000774b59cd} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes

@getnamo:

Still seeing this same issue with a Windows 64-bit packaged build using MyoPlugin 0.7.12, latest MyoConnect (0.15.0) and latest Myo firmware (1.4.1670). Built UE4 executable crashes on startup. The stack trace is identical to the above quoted post. Myo Connect is running and PIE (Play in Editor) works fine.

I followed the steps on Shipping/Packaged Builds. One thing that is unclear is whether to copy the Binaries folder from the root of the plugin distribution files or from <UE4 Project>\Plugins\MyoPlugin\Binaries after doing a build. I assume it is the former rather than the latter. In other words, I assume the point of this step is to get the dependencies myo32.dll and myo64.dll into <deployment folder>\WindowsNoEditor\<project name>\Binaries\WinXX\ where XX is 32 or 64, respectively.



@Cupit: what did you do to get your packaged build working?

[savantguarde]

Still getting this error with all latest.

I use this plugin in 4.8 ,just by blueprint .It runs ok in editor But can not run after package . Crashed !Anyone can help me ?
Fatal error!



myo64.dll {0x000007fecac41ae0} + 0 bytes
myoPluginTest.exe!DataCollector::Startup() {0x0000000141fef41e} + 138 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!FMyoPlugin::SetDelegate() {0x0000000141feef9a} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegate::MyoStartup() {0x0000000141ff707d} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!MyoDelegateBlueprint::MyoStartup() {0x0000000141ff8222} + 0 bytes [d:\users\wujiankun\documents\unreal projects\myoplugintest\pl
myoPluginTest.exe!AWorldSettings::NotifyBeginPlay() {0x000000013fd027fd} + 0 bytes
myoPluginTest.exe!AGameMode::HandleMatchHasStarted() {0x000000013fe68032} + 0 bytes
myoPluginTest.exe!AGameMode::SetMatchState() {0x000000013fe83be0} + 0 bytes
myoPluginTest.exe!UWorld::BeginPlay() {0x000000013fcdc0ce} + 0 bytes
myoPluginTest.exe!UEngine::LoadMap() {0x000000013fbe70a8} + 0 bytes
myoPluginTest.exe!UEngine::Browse() {0x000000013fb8cd6e} + 0 bytes
myoPluginTest.exe!UGameInstance::StartGameInstance() {0x000000013fe87683} + 0 bytes
myoPluginTest.exe!UGameEngine::Init() {0x000000013fe69b0b} + 0 bytes
myoPluginTest.exe!FEngineLoop::Init() {0x000000013f280b15} + 0 bytes
myoPluginTest.exe!GuardedMain() {0x000000013f27fed8} + 0 bytes
myoPluginTest.exe!GuardedMainWrapper() {0x000000013f28020a} + 0 bytes
myoPluginTest.exe!WinMain() {0x000000013f2930e9} + 0 bytes
myoPluginTest.exe!__tmainCRTStartup() {0x0000000142300c95} + 21 bytes [f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c:618]
kernel32.dll {0x00000000774b59cd} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes
ntdll.dll {0x00000000775eb981} + 0 bytes

Still getting this one with all latest. Any ideas or anyone managed to get packaged builds to work?

[AlessioMorosini]

Hi getnamo,
first I thank you for all these plugins!
I have just downloaded the new version of Unreal, the 4.9.2....and clearly plugin doesn't work.
Do you think you will fix it?
'cause I'm kind of doing the thesis on it, and I need to know..
otherwise I will just use Unreal 4.8

Thanks so much

LauraF

[getnamo]

Update to 0.7.13
-Updated to work with myo connect 1.0. The pitch/roll are now correctly
reversed
-Code fixes for UE4.9 compile

Hi getnamo,
first I thank you for all these plugins!
I have just downloaded the new version of Unreal, the 4.9.2....and clearly plugin doesn't work.
Do you think you will fix it?
'cause I'm kind of doing the thesis on it, and I need to know..
otherwise I will just use Unreal 4.8

Thanks so much

LauraF

Just pushed a 4.9 update, find it in the usual place. Note that you always have the source and can recompile the plugin yourself at any time.

Still getting this one with all latest. Any ideas or anyone managed to get packaged builds to work?

Haven't had a chance to look at these issues, will have a look at them + architecture change and Motion Controller support after mid november.

[sarkawt909]

will it be a compiled version for 4.10